Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.1 LAccepted-AOC | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹30.4 L+₹4.2 L (15.9%)Rejected-Finance OPPOSITE J K BANK BAROO NH1 HAIDERY COMPLEX BAROO KARGIL BAROO KARGIL LADAKH 194103 | KARGIL | LADAKH | 194103 | L2 | Rejected-Finance Higher rate quoted | |
| 3 | L3₹36.0 L+₹9.8 L (37.3%)Rejected-Finance | L3 | Rejected-Finance Higher rate quoted | |
| 4 | L4₹44.0 L+₹17.8 L (67.9%)Rejected-Finance | L4 | Rejected-Finance Higher rate quoted |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
25 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2022_MES_529893_1
8400-813/E8
Open Tender
Electrical and Maintenance Works
Works
330 days
PANAGARH
Class D, Cat b (i)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹80,000
Yes
15 Nov 2022
9 Jun 2022
26 Jul 2022
9 Jun 2022
25 Jul 2022
4 Jul 2022
Amount
Excavation in trenches not exceeding 1.5m wide and n.exc 1.5 m in depth for laying of cable/erection of pole and getting out in soft/loose complete all as specified and directed.
Excavation in trenches not exceeding 1.5m wide and exceeding 1.5 m in depth for laying of cable/erection of pole and getting out in soft/loose complete all as specified and directed
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc. 25 cm in hard/dense soil complete all as specified and as directed.
Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) for coping around poles , including necessary form work finishing even and smooth without using extra cement complete all as specified and directed
M&L PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in foundation for stay set /Pole/ FPB etc including fair finish even and fir to exposed surfaces without using extra cement complete all as specified and directed.
Supply & laying Sand coarse dry as in cushioning of underground electric cable in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable ) and gently punned down to 18cm thickness all complete as specified and directed. (Note :- Only punned down sand shall be measured).
M&L for fly ash bricks locally available of size 23 x 11 x 7 cm laid dry width wise across the line of cable in trenches for protection of UG cable complete all as specified and directed.
Dismantling/taking out carefully of old LT cable of any size type or core and kept aside for reuse / rerouting / jointing / replacement etc complete all as specified and directed
Dismantling/taking out carefully of old bricks any size type kept aside for reuse / rerouting / jointing / replacement etc complete all as specified and directed
Laying only serviceable bricks for protection of cable obtained during excavation from item No 10.00 here-in-before complete all as specified and directed.
M&L for laying or passing through pipe LT UG XLPE insulated, armoured heavy duty 1100 volts grade with aluminum stranded conductor of cross sectional area 25 sq mm 4 core complete all as specified and directed
All as per Item No 12.00 mentioned here-in-above but 16 sqmm 4 core complete all as specified and directed
All as per Item No 12.00 mentioned here-in-above but 6 sqmm 4 core complete all as specified and directed
S&F/laying 40mm bore, steel tubings, galvanised, light grade with all fitting laid across road , in trenches or across PCC drain or along electric pole or floor/wall etc for protection of cable including taking down old unserviceable one complete all as specified and directed.
Dismantling existing steel poles/ struts, any size carefully for reuse including necessary excavation demolition of concrete transportation cost etc. and removing the old unserviceable rubbish etc complete all as specified and directed
M&L for steel tubular swaged poles complete with cast iron/MS base plate , finial taper plug , bolts , nuts & screws as specified type 410 SP-31 , 9 meter long complete including PCC (1:3:6) type C2 (using 40 mm stone graded stone aggregate) in foundation and coping with PCC (1:2:4) type B1 (using 20mm graded stone aggregate) complete all as specified and directed. (Note: PCC anti climbing device, cross arms insulator, ACSR conductor and earth work measure and paid separately)
S&F in repair GI Bracket of dia 40 mm light grade with 1.2 mtr length including fixing the fitting removed for changing the bracket and connection with existing wire etc complete all as specified and directed
M&L for wiring in repair for circuit / submain wiring alongwith earth wire in PVC conduit with FR PVC insulated copper conductor , 2 x 1.5 Sqmm + 1 x 1.5 Sqmm single core (or Three core 1.5 Sqmm copper conductor) in surface complete including necessary MS clamps after taking down old unserviceable wiring of any condition complete all as specified and directed. (Note: Wire and conduit will be measured as single unit).
S&F junction box (minimum size 205mmx255mmx112mm) in repair made of polycarbonate with IP 65 degree of protection , dust proof, water tight, light weight, acid resistant, corrosion proof insulated & shock proof, fire retardant, self extinguishing, halogen & silica free non-toxic material, UV resistant, with internally embedded gasket fitted with required connector/terminals for up to size 25 sqmm 4 core cable and hinged from Top and openable from down side and cable entry from sides or down including Glands and 10A SP MCB mounted on DIN rail for Street light connection complete all as specified and directed.
Taking down and dismantling of street light fittings of any type size and model (FTL, HPSV,MVL,MH, floodlight , LED Fittings etc), and depositing the same to MES store yard for repair/replacement if any required or as directed by Engr in Charge complete.
S&F driver for LED luminary suitable for single phase 45 watts complete incl taking out of fitting from pole and refixing after repair complete all as per existing specification Make as per fitting fixed at site complete all as specified and directed.
S&F driver for LED luminary suitable for single phase 60 watts complete incl taking out of fitting from pole and refixing after repair complete all as per existing specification Make as per fitting fixed at site complete all as specified and directed.
S&F driver for LED Bollard 08 watt complete incl taking out of fitting and refixing after repair complete all as per existing specification Make as per fitting fixed at site complete all as specified and directed.
S&F driver for LED Bollard 09 watt complete incl taking out of fitting and refixing after repair complete all as per existing specification Make as per fitting fixed at site complete all as specified and directed.
S&F in repair Gate / Post Top lantern LED lights fitting of capacity 20 W die-cast aluminium body, 20 watt LED 3000/5700K and toughened glass complete with all accessories incl taking out old unserviceable one complete all as specified and directed
S&F in repair Gate / Post Top lantern LED lights fitting of capacity 40 W die-cast aluminium body, 40 watt LED 3000/5700K and toughened glass complete with all accessories incl taking out old unserviceable one complete all as specified and directed
S&F in repair Garden light/LED Bollard LED lighs fitting of capacity 09 W die-cast aluminium body, 09 watt LED 3000/5700K and toughened glass complete with all accessories incl taking out old unserviceable one complete all as specified and directed
S&F LED street light fitting 45 Watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD, high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete suitable for GI bracket of dia 43 mm complete all as specified and directed by Engr-in-Charge
S&F LED street light fitting 60 Watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD, high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete suitable for GI bracket of dia 43 mm complete all as specified and directed by Engr-in-Charge
S&F LED street light fitting 90 Watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD, high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete suitable for GI bracket of dia 43 mm complete all as specified and directed by Engr-in-Charge
S&F LED flood light 120 watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.
S&F LED flood light 170 watt 230 V AC outdoor type with Efficacy > 100 LPW , 10 KV SPD with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp.
S&F in repair of street light timer panel made of polycarbonate body including Digital Timer Switch, 40/63A 3 phase Contactor, MCB and wiring if any required with min 1 Sqmm copper conductor cable and instrument wiring with 1.5 Sqmm fine, terminal blocks etc incl taking out old unserviceable one complete all as specified and directed .
S&F in repair of power contactor three pole 40/63 Amp 415 Volts din rail mounted type on existing panel complete all as specified and directed.
S&F in repair of Digital Timer Switch (Crono time switch) 110-240V AC 1 C/O - 2 Module on existing panel complete all as specified and directed.
M&L for repair of existing solar street light at site after taking down existing fittings such as solar pannel , battary , luminairs etc , repair the same , re-assembling , re-fixing & testing complete all as specified and directed (Notes: 1.The cost of wiring if any required with suitable size copper conductor cable,terminal blocks of Battery, Charging of Battery etc deemmed to be included in the item rate. 2. The cost of DC lamp , converter etc , auto switch will be paid under appropiate item.)
S&F solar battery 12 volts 75 AH tubular including removal of old unserviceable battery from existing place complete all as specified and directed. (Note: Cost of Bty Terminal , DC cable , repairing of Bty Box etc deemed to be included in the item rate.) Make : Exide/Amaron/Tata Green/Solartech
S&F charge controller SHLS including removal of old unserviceable one complete all as specified and directed. Make : Bajaj / Solartech
S&F of solar power module 75 W 12 V including removal of old unserviceable from existing place in repair complete all as specified and directed. Make : Exide/Amaron/Tata Green/Solartech
S&F solid state luminaire system LED 12 watt in repair complete all as specified and directed. Make : Havells / Bajaj / Solartech.
S&F in repair Glowsign Board in Blue base with White letters including frame work with 0.7 mm thick GI plain sheet including errection at site at any position & testing complete all as specified and directed. (Note: Necessary nut,bolt,washers , fastner , welding etc & internal lighting and electrical wiring etc required deemed to be included into the item rate.)
M&L for two coat of Aluminium paint after preparation of old surface of Steel/Iron electric LT poles including pole fittings with two coat of Aluminium paint such as cross arms of any description anti climbing devices nut bolts etc and white weather coat paint of PCC coping and painting 05 Nos of strips of each 30cm height of Yellow & Black synthetic enamel paint alternatively above coping including numbering of poles as specified and directed.
M&L for white weather coat paint on PCC pole coping and one coat of white primer upto 1.5 meter height above coping after preparation of old surface (Full height of LT pole to be cleaned with wire brush etc) and two coats of Aluminium paint on fittings such as cross arms of any description anti climbing devices nut bolts etc and painting 05 Nos of strips of each 30cm height of Yellow & Black synthetic enamel paint alternatively above coping including numbering of poles complete all as specified and directed.
M&L for earthing complete with galvanized steel plate electrodes of size 600mm x 600mm x 6mm thick buried directly in ground with earth pit not less than 2.25m deep below normal ground level with top edge of plate not less than 1.5 m below normal ground level connected to galvanized iron wire of 4 sqmm earth lead by means of nuts bolts check nuts GI washers earth wire protected by galvanized iron pipe 15 mm bore (light grade) including concrete pit in PCC (1:3:6) type CI, Chequred plate cover plate of size 30x30x10 cm with one handle for lifting made out of 8 mm dia MS bar, funnel wire mesh 20 mm bore galvanized iron pipe (medium grade) for watering charcoal or coke and salt in alternate layers necessary earth work in soft/loose soil complete all as shown in electrical plate No 3 of SRR part 1 including testing on completion all as specified and directed. incl demolition to existing one complete all as specified and directed. (Note :- (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the earth testing register, prepared and to be maintained by the contractor & submitted to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
M&L for drilling hole horizontally road under ( min 1 mtr) pavement hardstanding by treanchless technology using ultra sound technique and necessary machine suitable and including 150 mm dia HDPE pipe complete all as specified and directed .
Taking down lumanaries of High Mast and servicing the motor, gear, Chain etc and restoring the lumanaries to top of the mast of pole, including charges for machinery/hydra required for fixing at top position as directed.
Servicing of OH Manual Crane of capacity 5 Ton including greasing of crain and painting of crane and its rail with existing colour Enamel paint over a coat of Red Oxide Primer after removing rust from structure complete all as specified and directed (Note : Working dimensions of cranes are 18 m x 48 m.)
Servicing of Flame proof EOT Crane (Make - Tuobro Furgson India Pvt Ltd) by OEM of capacity 5 Ton including greasing of crain and its rail after removing old dust from moving parts structure complete all as specified and directed (Note : Working dimensions of cranes are 18 m x 36 m.)
Repair to wiring of Remote Control of Flame proof EOT crane including any minor repairs all as directed by Engr-in-Charge
Repair to winding of 3 Phase Induction Motor of capacity 5 HP (3.7KW) having speed of 960 RPM, 50 Hz, IP55 with Delta Connection protection suitable for flame proof operation complete all as specified and directed. (Note : This item includes cost of copper wire for winding)
Repair to winding of 3 Phase Induction Motor of capacity 0.75 HP (0.55 KW) having speed of 890 RPM, 50 Hz, IP55 with Star Connection protection suitable for flame proof operation complete all as specified and directed. (Note : This item includes cost of copper wire for winding)
S&F FLP/WP gravity type limit switch with 2NC contacts rated current 40 Amps at 415 Volts, 50 Hz complete all as specified and directed. (Make - Suni Cranes Controls (Cat - Suni/FCWLS1SE2) or equivalent)
S&F FLP/WP lever type limit switch with 2NC contacts rated current 40 Amps at 415 Volts, 50 Hz complete all as specified and directed. (Make - Suni Cranes Controls (Cat - Suni/FLLS2SH2) or equivalent)
S&F FLP/WP Rotary gear type limit switch with 2NC contacts rated current 40 Amps at 415 Volts, 50 Hz, Gear Ratio - 48:1 complete all as specified and directed. (Make - Suni Cranes Controls (Cat - Suni/FLRLS2SH2) or equivalent)
S&F FLP/WP Electro - Hydraulics Thruster Brake suitable to work on 3 Phase 415 Volts AC, 50 Hz complete all as specified and directed (Make - Suni Cranes Controls (Cat - Suni/FMDT10018+Suni/FST520) or equivalent)
S&F FLP/WP Electro - Hydraulics Thruster Brake suitable to work on 3 Phase 415 Volts AC, 50 Hz complete all as specified and directed (Make - Suni Cranes Controls (Cat - Suni/FMDT15018+Suni/FST520) or equivalent)
S&F in repair galvanized Iron Bracket of dia 25 mm light grade with 1.2 mtr length including fixing the fitting removed for changing the bracket and connection with existing wire etc complete all as specified and directed
M/S Ali Trading Co
SARASWATI ENTERPRISE (INDEX NO CEEC D-81)
R. D. Industrial
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .