CERTAIN REPAIR TO ROOF FLOORS JOINERY PLASTER PLUMBING AND OTHER ALLIED WORKS AT 635 SATA BTY 115 ENGR REGT AND 21 FD WORKSHOP CMVL VSD AMSI 32 MVH 416 ENGR BDE FASF SOFIPUR UNDER AGE BR II OF GE NORTH MEERUT CANTT

Amount

M&L for 75mm thick PCC (1:2:4) type BO, (using 12.5mm graded stone aggregate) sub base as in floor to receive tiles complete all as specified.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

Taking down aluminium shutter exc 1 sqm but not exc 2 sqm and refixing same opening after repair of aluminium shutter, such as rubber neoprene packing, hanging of shutter, setting of shutter in original position etc complete all as specified and directed.

S&F glazed and skeleton shutters 35 mm thick 2nd class hardwood (SAL/ CHAMP / HOLLOCK) open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); for doors and fitted to chowkats complete all as specified and directed.

S&F plain, framed, panelled shutters (any number of panels), of 2nd class Hardwood (HOLLOCK / CHAMP / SAL) 35mm thick with panels of timber flaton both sides (feather edges), or of veneered particle board medium density, wood particle board with commercial face veneers; and fitted to chowkats complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) not exc. 1.5 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

Taking down chowkats or frames with shutters (without taking off shutter and builders hard ware fittings from frames) exc 1.5 sqm but not exc. 4 sqm each, complete all as specified and directed. Note :- Rate also incuding in this item for necessary cutting down / taking out hold fasts from the existing concrete / brick work and making good the disturbed surfaces with match existing surfaces.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined to gether with solvent cement, suppling & fixing in the frame at site as per specification & drawing on srl page No 174 of SSR Part-II complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing shown on page 178 of SSR Part-II complete all as specified and directed.

Supplied and fixed steel windows with pressed steel frame made out from 1.25 mm thick steel with one or more rebate with glazed shutters and fly proofing shutters including guard bars, hinges, peg stay , handles tower bolts lugs including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonry work complete all as specified and shown on drawings (Note : Disturbed surface of wall shall be made good to true surface)

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates with and including joining cleat for fixing etc complete all as specified and directed.

S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor, over all length of cover plate 150mm complete all as specified and directed.

Supplied and fixed powder coated anodised aluminium window and ventilator shutter fixed type with sash bar aluminium secition weighing 0.55 Kg / RM including necessary joining cleat glazing, clip, handles, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed. Note :- Glass panes in panels shall be measured and paid separately.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, having shoot / dia of bolt not less than 12mm complete all as specified and directed.

S&F 250 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 12mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and directed.

S&F butt hinges of 100 mm size, Medium weight, cold rolled mild steel. complete all as specified and directed.

S&F 125mm size extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beadings complete all as specified and directed.

S&F rolled mild steel in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges,. Steel peg stay and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonary work complete all as specified and directed. (Note : Disturbed surface of wall shall be made to good to tune surface)

S&F anodised aluminium snap grid frame work for false ceiling suspension system of size of grid 605x605 mm complete all as specified and directed.

M&L for preparing the new concrete / plastered surfaces by cleaning thoroughly to make it smooth and free from any foreign matter such as fungus, moss, dust etc by wire brushing and dusting and applying a coat of bitumenous primer conforming to IS : 3384 - 1986 @ 0.30 litre / Sqm and then pressing & laying 3mm thick Atactic Polypropylene Polymer (APP) modified prefabricated with non woven polyester reinforcement five layer water proofing membrane weighing not less than 3.60 Kg/ Sqm comprising of centre core of 160 - 170gsm non - woven polyster matt sandwitched on both sides by APP polymer modified bitumen duly protectd on both sides by 20 micron HMHDPE film by torch on application with gas welding torch (Butane torch), and thereover applying a tack coat of 85/25 blown grade bitumen conforming to IS : 702 @ 1.20 Kg / Sqm and finish the top surfaces with aluminium paint (Super Silver Shield) @ 0.150 Ltr / Sqm complete all as specified. as per manufacturer's instructions and as directed.

Supplied and fixed pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed pre- painted galvalume (tiles pattern) aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer's instructions

Supplied and fixed 4mm thick asbestos cement plain building board fixed to timber/steel framed work with screws in ceiling complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame and 5mm thick teak wood beads all around to prelaminated particle board including piano type hinges complete all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed".

M & L for light shade vitrified tiles 10mm thick (square / rectangular) area of each tile not exc 0.36 sqm as in floors etc, set in neat cement slurry over CM screed (screed shall be measured and paid for separately under respective item), jointed complete all as specified and directed".

All as per Srl item No 31 here-in-befoe but on wall as skirting over 10mm thick rendering in CM 1:4

M&L for Glazed ceramic coloured tiles of size 350mmx 250mmx7 mm / 450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) complete all as specified and and directed

M&L for granite (of any type) tiles 20mm thick perfect black machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for laying 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

Dismantling of floor, hearth or wall tiles / terrazzo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Make : Mehatab tiles, indore ; Tulip Infrastructure, Saharanpur (U.P)

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete vertical surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M & L for applying 15mm thick rendering unsing ready mix plaster bags on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @3% by weight of cement of as per manufacturer instructions, complete all as specified an directed. Note:-Water proofing compound shall be measured and paid sepratly Note Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of issued work order No 1

M&L for preparing of new/ old decorated surfaces of ceiling ( plastered or un plastered ) including cornics etc and applying two coat of white wash complete all as specified and directed

M&L for preparing of new / old decorated surfaces of walls ( plastered or un plastered ) including cornices etc and applying two coats of oil bound distemper, complete all as specified and directed

M&L for complete removal of existing treatment of new / old decorated surfaces of walls and applying plaster of parris to finish even and smooth surfaces and applying two coat of exterior acrylic emulsion paint over a coat of primer complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying two coat of white / tinted synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of white / tinted synthetic enamel paint complete all as specified and directed

M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty or glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for 4.8 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane complete all as specified and directed.

All as per Srl item No 50 here-in-befoe but exc 0.5 sq. m in each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and directed.

Taking up or down GI water tubing 15mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Taking up or down GI water tubing 20mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Taking up or down GI water tubing 25mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Taking up or down GI water tubing 40mm bore and connection including cleaning serviceable pipes for refixing and unserviceable removal from the site complete all as secified and directed

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 25 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 40 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

-------------BLANK----------

-------------BLANK----------

Dismantling of old water tank exc 250 Ltrs & n.exc 500 Ltrs capacity and Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

Dismantling of old water tank exc 500 Ltr & n.exc 1000 Ltr capacity and Supplied, hoisted and fixed inposition rotational moulded polyethylence water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with and including 20mm dia Ball valve high pressure of PTMT with apoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F in repairs 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) complete all as specified and directed.

S&F in repairs bib tap, C P cast copper alloy fancy type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supplied & fixed in repairs stop valves, 15mm bore dia cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed in repairs gun metal globe or gate valves, 15mm bore dia, with iron wheel head, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

Supply and fixed in repairs gun metal globe valves or gate 20 mm dia, with iron wheel head ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe or brass ferrule of 15 mm bore and fixed (Minimum weight 90 gms complete all as specified and directed.

S&F in repair Pillar taps of PTMT 15mm dia any colour high pressure screwed for iron pipe and fixed . (Minimum weight 15mm -110 gms)

S&F in repair stop valve of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed. (Minimum weight 15mm- 90gms/20mm-92gms) complete all as specified and directed.

Supplied and fixed in repairs grating doom 125 mm dia with waste hole of PTMT (minimum weight 40 gms) complete all as specified and directed.

Supplied and fixed 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

Supplied and fixed 75 mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint laid in trenches/under floor complete all as specified and directed.

Supplied and fixed in repairs UPVC (SWR) bends 110 mm bore complete all as specified and directed

Supplied and fixed in repairs UPVC (SWR) bends 75 mm bore complete all as specified and directed

Supplied and fixed in repairs UPVC (SWR) floor trap 75 mm bore including jointing to waste pipe with cement solvent fixed in cement concrete complete all as specified and directed

Supply and fixing in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

Supply and fixing in repairs vitreous china urinal bowl, flat back of size 465x355x265mm (minimum) white with grating and unionfor discharge pipe (excluding flushing cistern,flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm lng brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusiveof fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.

Supply and fixing in repairs PVC low level flushing cistern of 10 Ltr capacity syphonic action type with inlet ball valve, float and handle including PVC brackets for mounting of cistern complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) and including removal of debris & rubbish from the site complete all as specified and directed. Note : Stone slabs / tiles and hard core of any description shall not be measured & paid under this item.

Dismantling of timber scantling unframed work 40sqcm and over in section in any position complete all as specified and directed.

Dismantling of timber scantling unframed work under40sqcm in section in fillets, rails posts etc complete all as specified and directed.

Dismantling AC sheet corrugated or semi corrugated sheet of any description as in roof and including removal from the site complete all as specified and directed.

Dismantling of wall or ceiling board (fiber,pulp,insulation etc) any thickness including cover fillets and removal from the site complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 300mm suitable for hot water complete all as specified and directed

S&F fancy type brass CP hot and cold wash hand basin mixer 15mm bore screwed down high pressure with long screwed shanks and fly nuts, screwed to iron piep (Make - Jaquar Cat Part- No SOL-6167B) complete all as specified and directed

Supplied and fixed CP towel ring 150mm dia make-JaquarCat part No-1121 complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern), white with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed

Supplied and fixed in repairs vitreous china WHB, white, flat back size 630x450mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer and providing cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

S&F plastic cipla plast multipurpose bath room coloured mirror cabinet storase size height 54cm, 35cm width and 13cm depth wall mount complete all as specified and directed

S&F stainless steel peg set 8 Nos in 45cm length strripe dia of hooks 6mm complete all as specified and directe

S&F hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame with 5mm PVC fillet as per specifications and drawing shown on page No 180 of SSR Part-II and as directed.

Taking down shutters of any description exc 1 but n exc 2 sqm each, including builders hard ware fittings complete all as specified and directed.

Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store complete all as specified and directed.

veer enterprises

Arun Construction Co.