Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹32.6 L
EMD Value
₹65,300
Closing Date
10 Aug 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DGM JKPCC LTD SRINAGAR UNIT
DGM JKPCC LTD SRINAGAR UNIT
Balance Work of Security Block at Excise and Taxation complex Solina
2022_PWDJK_182091_1
12/DGM/Srinagar/JKPCC of 2022-23
Open Tender
Civil Works
Item Rate
60 days
SRINAGAR
Please refer Tender documents.
3 documents required · 3 mandatory
₹2,500
FC JKPCC LTD A/c
₹65,300
18 Aug 2022
1 Aug 2022
11 Aug 2022
1 Aug 2022
10 Aug 2022
1 Aug 2022
Amount
Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure upto floor-V level including curing in 1:6 cement mortar (1 cement : 6 coarse sand).
15mm Cement plaster on the rough side of single or half brick wall in (1 cement : 6 coarse sand) mix
Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.
Cement concrete flooring (1:2:4) mix, 50 mm thick with 20mm nominal size stone aggregate.
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.Size of tile 600x600 mm
Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class Deodar wood
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood (35mm Thick) complete Job.
Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood(35mm Thick) complete Job.
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws complete Job.
Providing & fixing of 5mm thick Saint Gobin glass panes including 32mm silver wooden beading ,nails etc & including cutting ,wastages all carriages involved, "complete job".
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
Providing edge moulding to Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Providing & fixing of 4" budloo / silver wood cornice including cutting ,wastages,nails,scaffoldong charges complete Job.
Providing & fixing of POP nade corner cornice 4" including scffolding charges completed.
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work
Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work
Applying priming coat with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works.
Structural steel work in welded built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
Providing & fixing of Anchor bolts complete with all the fittings as per drawing and specifications (16mm dia ,450mm long).
Providing & fixing of 5" long Dash fastners.
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).
Providing & laying of stone soling hand packed laid dry (complete job) including all carriages complete. (45mm to 90mm size).
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.
Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size,dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.
Finishing with Epoxy paint (two or more coats) on concrete work at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete.
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position using Budloo / Fir wood including cost of nails,scaffolding etc complete job (making grid of 2'-0"c/c ,2''x3'' section)
Providing and fixing of 12mm thick imported wooden T&G ceiling (Knot free 5" wide) including cutting, wastages,scaffolding charges including cost of nails,fevicol and applying of two coats of Polish complete
Providing and fixing plained eaves boarding 2nd class Deodar wood 300x40 mm (nominal size) including cost of nails ,bolts,screws,fevicol & scaffolding charges complete.
Providing & fixing hardware fittings (Aluminum) includind cost S.S screws.
a) Window fiitings
i) Tower bolts - 4"
ii) Eye-Hooks - 5"
iii) Handles - 5"
iv) Hinges - 3"
b) Door fiitings
i) Hinges - 4"
ii) Handles - 5"
iii) Tower bolts - 6"
iv) AL-drop lock type
v) Door stopper
Providing & fixing wood work in Poplar wood for water storage tanks plate form including cutting, wastages all carriages nails etc complete job.
Providing & fixing of Budloo wood work in Duct opening including fixing of 10mm ply board & including cost of hardware fittings like hinges, screws, nails etc. complete job and including priming and painting. (size of opening 3'-0"x3'-0")
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
Providing corrugated Green colour coated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required, 0.50 mm thick with zinc coating not less than 275 gram/m2 complete. ( TATA / JINDAL / BHUSHAN ).
Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete, 0.50 mm thick with zinc coating not less than 275 gram/m2. (TATA / JINDAL / BHUSHAN ).
Providing & fixing soil, waste and vent pipes conforming to IS-13592 & fittings (IS-14735) suitable to rubber ring , jointing , junction , clean-out plug , cowls , offsets , collar , MS holder bat clamp , access pieces , trap of self cleaning design etc . Complete including jointing, (Heavy grade Finolex or equivalent).
i) 75mm OD
ii) 110mm OD
iii) 160mm OD
iv) 50mm OD
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Providing & fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls and painting the surface of pipe with confirming to IS-1239 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the walls etc.and cutting holes upto 30x30 cm in walls complete wherever required.
i) 32mm OD
ii) 25mm OD
iii) 15mm OD
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end).
iii) 15mm
Providing & fixing 100mm PVC trap
Providing & fixing 75mm PVC trap
Providing & fixing water closet squatting pan (Indian Type WC Pan) with 100mm sand cast iron P or S-trap,10 litre low level PVC flushing Cistern incl.flush pipe (of approved make) manually controlled device (handle lever) conforming to IS:7231,with all fittings and fixtures complete, including cutting and making good the walls and floor wherever required.
Providing & fixing wash basin with CI brackets,15mm CP brass mixer,32mm CP brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required.
Providing & fixing 15mm nominal bore wall mixer non telephonic.
Providing & fixing 15mm nominal bore Sink mixer of approved make or brand.
Providing & fixing stainless steel ISI-304(18/8) Kitchen sink as per IS-13983 with CI brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required 600x450mm bowl depth 200mm.
Providing & fixing 15mm nominal bore Bib cock.
Providing & fixing 15mm nominal bore Angle value.
Providing & fixing CP soap case of standard quality including cost screws and rawl plugs complete job.
Providing & fixing CP gratings (Jali) anti-cockroach of standard quality complete job.
Providing & fixing Towel rail C.P. brass 600 x20 mm together with a pair of each C.P. brass brackets to fit the size of towel rail.
Providing & fixing on wall 50 / 25 litres electric Geyser with ABS body of approved make.
i) 50 Litre
ii) 25 Litre
Providing & fixing mirror of superior glass (of approved quality and of required shape & size .Rectangular shape 453x357mm.
Providing & fixing of PVC connections
i) 24" long
ii) 18" long
Providing & fixing of 1"x1' steel mesh including nuts,bolts,washers,welding ,scaffolding etc.
Supply/ laying of stone dust in sunken portion of bathrooms.
Centring & shuttering including struting, propping etc & removal of same.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.(Thermo-Mechanically Treated bars of grade Fe-500D or more.) including cost & carriage of material.
Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) including bed concrete as per standard design.
(i) 100mm dia pipe
(ii)150mm dia pipe
M/S PYRAMID INFRATECH
ABDUL SALAM DAR
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .