SPECIAL REPAIRS TO INTERNAL WIRING LIGHTS FITTING AND FLAME PROOF LIGHT OF VARIOUS WORKSHOP OF NAD PROVN OF LT CABLE AND CONNECTED WORK FROM SUB STN-B TO PERSONNEL EQUIPMENT ROOM FACILITY AT INS ABHIMANYU PROVN OF LT PANEL AT NAVAL STN KARANJA

Amount

Notes : - (i) (A) Job No.SO (K)/03/2025-26/SPL REP E/M (B) Job No. SO (K)/03/2025-26/LBW (C) Job No SO (K)/02/2025-26/REVENUE WORKS (D) SO (K)/02/2025-26/MINOR WORKS (E) Job No SO (K)/01/2025-26/MINOR WORKS (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.

COMMON ITEMS OF JOB (A) , JOB (B) , JOB (C) & JOB (D) Only (as per Appendix A to BOQ)

M&L for earthing with GI earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 32 x 6 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) type B1 using 20 mm graded stone aggregate, mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering ,40 mm dia light grade GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-1(2009) connected to earthing test point indicated including testing on completion complete all as specified and directed. Note : (i) The unit rate includes for protection pipe and GI strip from top of earth plate up to 7.5 meter above ground level and also the cost of the Test point. (ii) Joining of GI earth strip with pipe of the test point shall be done by using suitable cable lugs.

Excavation in trenches for not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in any type of soil including taking out faulty cable/cable, cable covers and GI pipe complete all as specified and directed.

Returning filling in including spreading levelling watering and well ramming in layers n.exc 25cm complete all as specified & directed.

Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the Starting point complete all as specified & directed.

M&L for dry river sand as sand cushioning for protection of UG cable including punning of sand in layers complete all as specified & directed. Note :- Punned thickness shall be measured for payment purpose.

S&F un-reinforced precast concret cable cover class LV type 1, flat size 250mm x 150mm x 40 mm complete all as specified & directed.

ITEMS FOR JOB 'A'

M&L for Submain wiring with single core 1100 volts 1.5 sqmm two runs FRLSH size PVC insulated PVC unsheathed stranded copper conductor using color code drawn through and including stove steel enameled conduit 19/20 mm dia with accessories like flame proof bend, flame proof juntion box etc and including 1.5 sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuty conductor by using green colour to common earth and connecting to earth point and connecting to earth dolly including taking down down old sub main wiring complete all specified and directed. Note : Upto four light controlled by one switch

M&L for Submain wiring with single core 1100 volts 2.5 sqmm two runs FRLSH size PVC insulated PVC unsheathed stranded copper conductor using color code drawn through and including stove steel enameled conduit 19/20 mm dia with accessories like flame proof bend, flame proof juntion box etc in and including 2.5 sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuty conductor by using green colour to common earth and connecting to earth point and ,connecting to earth dolly including taking down down old sub main wiring complete all specified and directed

M&L for Submain wiring with single core 1100 volts 4 sqmm two runs FRLSH size PVC insulated PVC unsheathed stranded copper conductor using color code drawn through and including stove steel enameled conduit 19/20/25 mm dia with accessories like flame proof bend, flame proof juntion box etc and including 4sqmm PVC insulated PVC unsheathed FRLSH copper conductor in cable for continuous earth continuty conductor by using green colour to common earth and connecting to earth point and ,connecting to earth dolly including taking down down old sub main wiring complete all specified and directed

S&F in repairs flame proof LED well glass hanging type 60w fitting on existing light point with suitable hanging arrangements one light control with one MCB SP, complete all as specified and directed. Note:The rates includes providing suitable necessary ladders /equipments for any height to taking down fixing the items.

S&F in repairs flame proof LED well glass hanging type 100w fitting on existing light point with suitable hanging arrangements one light control with one MCB SP/switch, complete all as specified and directed. Note:The rates includes providing suitable necessary ladders /equipments for any height to taking down ficing the items.

S&F in repairs Flame proof plugin switch socket 16A , 3pin (2P+E) , 220V, 50 Hz ,AC and fixing arrangement complete all as specified and directed

S&F in repairs Flame proof plugin switch socket 25A , 3pin (2P+E) , 220V, 50 Hz ,AC and fixing arrangement complete all as specified and directed.

S&F in repairs Flame proof LED Type tube light fitting 1X 20 watt ,four feet ,220V , 50 Hz ,AC and fixing arrangement complete all as specified and directed.

S&F in repairs Flame proof LED Type tube light fitting 2X 20 watt ,four feet ,220V , 50 Hz ,AC and fixing arrangement complete all as specified and directed.

S&F in repairs Flame proof DB TPN DB 4 way,220V , 50 Hz ,AC and fixing arrangement incomer MCB 4P 63amp/100 Amp and outgoing MCB sp 12 NOs bus bar 200 Amp complete all as specified and directed.

S&F in repairs Flame proof DB SPN DB 12 way,220V , 50 Hz ,AC and fixing arrangement incomer MCB 2P and outgoing MCB SP 10 NOs bus bar 100 Amp complete all as specified and directed.

S&F in repairs MCCB 4 pole, thermal magnetic release range 100 Amps of breaking capacity 16 kA, 415 Volts, 50 Hz, complete all as specified and directed.

S&F in repairs 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series) complete all as specified and directed.

S&F in repairs 32 AMP MCB SPN 240 V 10 KA (C-Series) complete all as specified and directed.

S&F in repairs Flame proof junction box 4 way 100mm including all connected accessories complete all as specified and directed.

S&F in repairs Flame proof bend including all connected accessories complete all as specified and directed.

S&F in repairs FLP FLEXIBLE metalic pipe for 19/20 mm dia complete all as specified and directed.

S&F in repairs FLP FLEXIBLE metalic hose conduit 1000 mm long for 19/20 mm dia fixed on directed place complete all as specified and directed.

S&F in repairs FLP rotary switch single pole 10/16 Amps and fixing arrangement complete all as specified and directed

S&F LED flame proof bulk head fitting 45w as complete all as specified and directed

S&F fabricated of Panel /DB COVER OF CRCA sheet sheet 3mm thick duly powder coated with seimens grey shad RAL 7032, totally enclosed, dust and vermin proof with & including welding, machining work, Painting work and connected items , taking down old cover complete all specified and directed.

ITEMS FOR JOB 'B'

Supplying, installing, testing and commissioning of factory made LT cubical double door panel with roof canopy, Outdoor type, of Suitable to accomodate the following accessories, made out of CRCA sheet 3 MM thick duly powder coated with Seimens Grey Shade RAL 7032, totally enclosed, dust and vermin proof outer cubicle. Inner cubicle should be made out of 2 MM thick CRCA sheet with working voltage of 415V, 50 Hz, 3 phase 4 wire fully compartmentalised with single door system for each compartment. Outer cubicle having both sides door openable and should be provided with suitable louvers for ventilation. Bus bars provided shall be adequately supported on insulators to withstand dynamic stresses due to short circuit current and shall be suitably colour coded with heat shrinkable sleeve for phase indication. The standard phase arrangement when facing the switchgear shall be R-Y-B from left to right. The bus bar connections and their insulated supports shall be mechanically strong, and shall withstand all the stresses which shall be imposed upon them in ordinary working due to fixing, vibration, fluctuation in temp., shot-circuit or other causes. The bus bar should be supported on DMC. Provision shall be made for expansion and contraction of the bus bars and connections with variation of temp. Internal wiring should be done with 2.5 sqmm multi-stranded copper conductors and shall be properly bunched, tied, ferruled for proper identification, crimped and shall be connected with suitable lugs and PVC sleeves, etc. The bottom of the panel should contain detachable plate having provision for entry of armoured cable of adequate size with glands. Threaded earthing studs - 02 Nos shall be provided at the bottom and lifting lugs of suitable size at top to lift the panel safely shall be made. The cubicle incomer MCCB as well as outgoings shall have copper TPN/TP extension links of current rating not less than 1.5 times the rated capacity of individual feeders with Ics = 100% Icu in all MCCBs with extended Rotary Handle. The cubicle should be inclusive of following : The cubicle should be inclusive of following :

(A) INCOMING - (i) MCCB, thermal & magnetic type, 4 pole, 415 volt, 35 kA breaking cap. adjustable thermal release range 250 Amps – 01 No. (B) OUTGOING- (i) MCCB thermal & magnetic type 4 pole 415 volt 35 kA breaking cap. adjustable thermal release range 200 Amps – 02 No. (ii) Multi function meter having LCD Display, 96 x 96 sq.mm -01 No (iii) Current transformer of suitable ratio, Accuracy - 5VA, Class - 1. (iv) LED INDICATORS RIBBED LENS WITH TRIMMED COLLAR - Red, Yellow and Blue - 1 Each, (v) Aluminium bus bar of Rating 300 Amp R-Y-B phases and Neutral. (vi) Base frame for cubical mounting made out of 40x40x6mm equal angle iron duly painted. (vii) Foundation for the panel should provided with PCC 1:4:8 using 40mm graded stone aggregate at a depth of 150 MM below G.L. and 100 MM above the G.L. with slot openings for I/C and O/G cables.

Supplying, laying, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed armoured cable, heavy duty, 1100 volts grade, aluminum conductor of 3.5 core 300 Sqmm size complete all as specified and directed :

S&F 80mm bore GI pipe light grade with all fittings laid in trenches complete all as specified and directed.

M&L for PCC type C2, 1:3:6 using 40 mm graded stone aggregate as in foundations ,filling and mass concrete includings necessary form work complete all as specified and directed.

M&L for fixing 4 Pole MCCB 250 Amps, 415 V, Microprocessor release with breaking capacity 36 KA

ITEMS FOR JOB 'C'

Supplying, installing, testing and Commissioning cubical type LT Panel floor mounted INDOOR type for 415V, 3 phase 4 wire sysytem 50 Hz AC supply, factory made fabricated from MS sheet totally enclosed, dust weather proof and vermin proof for outer shell having TPN aluminium bus bar rating 1.5 times that of controlling MCCB supported on bottom base channel MS section not less than 100mm x 50mm x 5 mm thick, entire panel shall have a common aluminium earth bar of size 25mm x 5mm at the rear with 2 Nos earth stud, solid connection from main bus bar to switchgears with required size of copper wiring with minimum 2.5 Sqmm PVC insulated copper conductor cable , cable alleys, cable gland plates in two half and general construction confirming to IS-8623/93 and wall/floor mounted on suitable PCC foundation with follwoing detailed specification & control complete with suitable fixing accessories:-

OUTER SHELL :- The outer shell shall be made of 2.00 mm thick CRCA body & MS angle section 50x50x6 mm frame with front & back openable, single door system lockable/ openable by keys from both sides having flush pattern fancy locks with louvers & air vent gasket for natural flow of air. The bottom of the outer shell contains a detachable plate ahing provision for entry of armoured cable of adequite size of glands. The dimension of the outer shell shall be adequite to accommdodate inner shell described below 50 mm space all around and shall be fabricated in such a way that the complet inner shell alongiwth its control gears/MCCB and accessories should be taken outside without disturbing outer sheel. The outer shell shall be mounted on a zinc metal coated stand. Provision of threaded earthing studs at bottom and lifting lugs of suitable size at top to lift the feeder pillar box safely shall be made. Computer cut self adhesive vinly danger notice plate having conventional symbol of bone and skull shall be provided. The degree of protection of outer shell shall be IP-65. INNER SHELL :- Inner shel made of 2.0 mm thick CRCA body compartmentalized for each control gear, front openable single door system lockable/openable by keys from both sides having chromium plated fancy locks (2 Nos in each compartment) ahving louvers and air vents gasket for natural flow of air "U' type gasket shall be used to make the inner shell completely vermin proof and to accomodate incomer/outgoing MCCB's and TPN aluminium bus bar and extension links of rating not less than the 1.5 times rated capacity of the respective MCCB's. The TPN bus bar and exension links shall be insulated with colour coaded heat, shrikable sleeve and shall be mmounted on suitable size 'F' class through out the length of the TPN bus bar. Computer cut self adhesive vinyl danger notice plate having conventional symbol of bone and skull shall be provoid on bus bar chamber. All control wires shall be with not less than 2.5 Sqmm multistranded copper conductor and shall be properly bunched. tied, ferruled for proper identification and crimped with adequite size of lugs. The cubical shall have a bottom channel of size 75x50mm duly coated with zinc metal coating. A detachable predrilled gland plate of thickness 3.15 mm zinc metal coated should be used at the bottom, indicating lamps LED type, 230 Volt, AC at the incomer of the unit to show three phase availablity at the incomer. The degree of protection for inner shell shall be IP-42 and carrly the following control :-

(A) INCOMING - (i) MCCB of 400 A, microprocessor based , 4 pole 415 volt 50 kA breaking cap. With adjustable over load,short circuit ,ground fault (4 pole) & fixed instantanous neutral protection(4 pole), conforming to IS/IEC-60947-2 including spreader terminal kit – 01 No. (B) OUTGOING - (a) MCCB of 100 A, microprocessor based , 4 pole 415 volt 35 kA breaking cap. With adjustable over load,short circuit ,ground fault & fixed instantanous neutral protection, conforming to IS/IEC-60947-2 including spreader terminal kit -06 Nos(5 W + 1 spare ) (b) MCB of SPN 40 A, 2 pole, 220 volt 16 kA breaking cap. With adjustable over load,short circuit ,ground fault & fixed instantanous neutral protection, conforming to IS/IEC-60947-2 including spreader terminal kit -15 Nos (C) Space for fixing three phase ac type digital meter, current range approx 5 to 400 amp,440V/220V , 50 Hz including adeqaute CT arrangemnt and connected items of suitable size approx (0.6"X0.6"X0.6") as per site requirement. - 2Nos (d)Digital type Voltmeter three phase class 0.5, 96X 96 mm flush mounted case with adeqaute CT arrangemnt (e)Digital type Ammeter three phase class 0.5, 96X 96 mm flush mounted case with adeqaute CT arrangemnt (f) LED INDICATORS RIBBED LENS WITH TRIMMED COLLAR - Red, Yellow and Blue - 1 Each, (g) Aluminium bus bar of Rating 500 Amp R-Y-B phases and Neutral. (h) Base frame for cubical mounting made out of suitable size equal angle iron duly painted. (j) Foundation for the panel should provided with PCC 1:4:8 using 40mm graded stone aggregate at a depth of 150 MM below G.L. and 100 MM above the G.L. with slot openings for I/C and O/G cables.

Supply, Installed, Testing and Commissioning cubical type LT Panel floor mounted INDOOR type for 415V, 3 phase 4 wire sysytem 50 Hz AC supply, factory made fabricated from MS sheet totally enclosed, dust weather proof and vermin proof for outer shell having TPN aluminium bus bar rating 1.5 times that of controlling MCCB supported on bottom base channel MS section not less than 100mm x 50mm x 5 mm thick, entire panel shall have a common aluminium earth bar of size 25mm x 5mm at the rear with 2 Nos earth stud, solid connection from main bus bar to switchgears with required size of copper wiring with minimum 2.5 Sqmm PVC insulated copper conductor cable , cable alleys, cable gland plates in two half and general construction confirming to IS-8623/93 and wall/floor mounted on suitable PCC foundation with follwoing detailed specification & control complete with suitable fixing accessories :-

OUTER SHELL :- The outer shell shall be made of 2.00 mm thick CRCA body & MS angle section 50x50x6 mm frame with front & back openable, single door system lockable/ openable by keys from both sides having flush pattern fancy locks with louvers & air vent gasket for natural flow of air. The bottom of the outer shell contains a detachable plate ahing provision for entry of armoured cable of adequite size of glands. The dimension of the outer shell shall be adequite to accommdodate inner shell described below 50 mm space all around and shall be fabricated in such a way that the complet inner shell alongiwth its control gears/MCCB and accessories should be taken outside without disturbing outer sheel. The outer shell shall be mounted on a zinc metal coated stand. Provision of threaded earthing studs at bottom and lifting lugs of suitable size at top to lift the feeder pillar box safely shall be made. Computer cut self adhesive vinly danger notice plate having conventional symbol of bone and skull shall be provided. The degree of protection of outer shell shall be IP-65. INNER SHELL :- Inner shel made of 2.0 mm thick CRCA body compartmentalized for each control gear, front openable single door system lockable/openable by keys from both sides having chromium plated fancy locks (2 Nos in each compartment) ahving louvers and air vents gasket for natural flow of air "U' type gasket shall be used to make the inner shell completely vermin proof and to accomodate incomer/outgoing MCCB's and TPN aluminium bus bar and extension links of rating not less than the 1.5 times rated capacity of the respective MCCB's. The TPN bus bar and exension links shall be insulated with colour coaded heat, shrikable sleeve and shall be mmounted on suitable size 'F' class through out the length of the TPN bus bar. Computer cut self adhesive vinyl danger notice plate having conventional symbol of bone and skull shall be provoid on bus bar chamber. All control wires shall be with not less than 2.5 Sqmm multistranded copper conductor and shall be properly bunched. tied, ferruled for proper identification and crimped with adequite size of lugs. The cubical shall have a bottom channel of size 75x50mm duly coated with zinc metal coating. A detachable predrilled gland plate of thickness 3.15 mm zinc metal coated should be used at the bottom, indicating lamps LED type, 230 Volt, AC at the incomer of the unit to show three phase availablity at the incomer. The degree of protection for inner shell shall be IP-42 and carrly the following control :-

(A) INCOMING - (i) MCCB of 300 A, microprocessor based , 4 pole 415 volt 50 kA breaking cap. With adjustable over load,short circuit ,ground fault (4 pole) & fixed instantanous neutral protection(4 pole), conforming to IS/IEC-60947-2 including spreader terminal kit – 01 No. (B) OUTGOING - (i) MCCB of 63 A, microprocessor based , 4 pole 415 volt 35 kA breaking cap. With adjustable over load,short circuit ,ground fault & fixed instantanous neutral protection, conforming to IS/IEC-60947-2 including spreader terminal kit -04 Nos(3 W + 1 spare ) (ii) MCB of SPN 40 A, 2 pole 415 volt 35 kA breaking cap. With adjustable over load,short circuit ,ground fault & fixed instantanous neutral protection, conforming to IS/IEC-60947-2 including spreader terminal kit -42 Nos (iii) Digital type Voltmeter three phase class 0.5, 96X 96 mm flush mounted case with adeqaute CT arrangemnt (iv) Space for fixing three phase ac type digital meter, current range approx 5 to 300 amp,440V/220V , 50 Hz including CT arrangemnt and connected items of suitable size approx (0.6"X0.6"X0.6") as per site requirement. - 2Nos (v) Digital type Ammeter three phase class 0.5, 96X 96 mm flush mounted case with adeqaute CT arrangemnt (vi) LED INDICATORS RIBBED LENS WITH TRIMMED COLLAR - Red, Yellow and Blue - 1 Each, (vii) Aluminium bus bar of Rating 400 Amp R-Y-B phases and Neutral. (viii) Base frame for cubical mounting made out of suitable size equal angle iron duly painted. (ix) Foundation for the panel should provided with PCC 1:4:8 using 40mm graded stone aggregate at a depth of 150 MM below G.L. and 100 MM above the G.L. with slot openings for I/C and O/G cables.

S&F GI strip strip of size 25 mm x 3.15 mm fixed to procelain insulator fixed with suitable saddles & fixing screws etc for roof with rubber & bitumen washer & fixed to insulator on wall for down conductor, complete all as specified and directed.

ITEMS FOR JOB 'D'

Supply, Installed, Testing and Commissioning cubical type LT Panel floor mounted OUTDOOR type for 415V, 3 phase 4 wire sysytem 50 Hz AC supply, factory made fabricated from MS sheet totally enclosed, dust weather proof and vermin proof for outer shell having TPN aluminium bus bar rating 1.5 times that of controlling MCCB supported on bottom base channel MS section not less than 100mm x 50mm x 5 mm thick, entire panel shall have a common aluminium earth bar of size 25mm x 5mm at the rear with 2 Nos earth stud, solid connection from main bus bar to switchgears with required size of copper wiring with minimum 2.5 Sqmm PVC insulated copper conductor cable , cable alleys, cable gland plates in two half and general construction confirming to IS-8623/93 and wall/floor mounted on suitable PCC foundation with follwoing detailed specification & control complete with suitable fixing accessories complete all as specified and directed.

OUTER SHELL :- The outer shell shall be made of 2.00 mm thick CRCA body & MS angle section 50x50x6 mm frame with front & back openable, single door system lockable/ openable by keys from both sides having flush pattern fancy locks with louvers & air vent gasket for natural flow of air. The bottom of the outer shell contains a detachable plate ahing provision for entry of armoured cable of adequite size of glands. INNER SHELL :- Inner shel made of 2.0 mm thick CRCA body compartmentalized for each control gear, front openable single door system lockable/openable by keys from both sides having chromium plated fancy locks (2 Nos in each compartment) ahving louvers and air vents gasket for natural flow of air "U' type gasket shall be used to make the inner shell completely vermin proof and to accomodate incomer/outgoing MCCB's and TPN aluminium bus bar and extension links of rating not less than the 1.5 times rated capacity of the respective MCCB's. INCOMING (i) MCCB 63 AMP 4 P 16 Ka thermal magnetic based with o/c, s/c protection & ROH - 01 No (ii) Digital type Indicating lamps RYB-03 nos. OUT GOING :(i) 40 amp MCB TPN 100 mA with enclosure-1 No.(ii) 40 amp MCB SPN 100 mA with enclosure-2 Nos NOTE - Contractor should visit the site and to prepare panel as per size required to fit in below stair case.

Supplying, laying, jointing, connecting & testing in trenches XLPE/PVC insulated PVC sheathed cable heavy duty 1100 volts grade, aluminum conductor 4 core 35 Sqmm in trenches / ducts/ complete all as specified and directed.

M&L GI pipe light grade with all fittings complete laid in trenches complete all as specified and directed. for 50 mm bore of pipe

ITEMS FOR JOB 'E'

Supply, install,testing and commissioning Fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules complete with battery backup complete all as specified and directed.. Make : NOTIFIER/BOSCH/HOCHIKI or equivalent as approved by GE

Supply , fixing and testing addressable type multisensor detector complying with and type certified to EN-45 with heat and smoke combination suitable to work on 24V DC(12V DC) fixed with LED made out offrame retardent plastic confirming tofire protection standard complete all as specified and directed. Make : APPOLLO/VIJAY/BOSHE/HOCHIKI/AGNI or equivalent as approved by GE

Supply , fixing and testing Addressable manual call point resettable type of suitable size complete all as specified and directed. Make APOLLO/KHERAJ/EXFLAME/NOTIFIER/BOSCH/HOCHIKI/AGNI or equivalent as approved by GE

S&F Fire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB 500 mtrs range complete all as specified and directed. Make CEASE FIRE/SAFE ZONE/ VRAJESH/KHERAJ/SUNFIRE or equivalent as approved by GE

S&F addressable control module including all fixing accessories complete all as specified and directed. Make : Honeywell system sensor or equivalent as approved by GE

S&F addressable monitor module including all fixing accessories complete all as specified and directed.Make : Honeywell system sensor or equivalent as approved by GE

S&F Remote response indicator including all fixing accessories complete all as specified and directed.Make : Honeywell system sensor or equivalent as approved by GE.

S&F 2 Core x 1.5 Sqmm, Multistranded Copper, PVC insulated, FRLS Type ST-2 PVC outer sheath, Armoured cable, RED in Colour. The cable shall be complete with Lugs, double compression glands, cable tags and Ferruling complete all as specified and directed.

M.K Enterprises (BID ID -3402841)

pk Enterprises (BID ID -3402870)

Sagar Electricals (BID ID -3403191)

K A ELECTRIC CO (BID ID -3402208)

Shri Krishna Trading Corporation (BID ID -3401391)

M/s S.D Construction Co (BID ID -3403565)