REPAIR/ MAINTENANCE OF STARTER PANELS, BOREWELLS, CHLORINE PLANTS AND OTHER CONNECTED ITEMS AND PERIODICAL TO INTERNAL SURFACES INCLUDING MISC REPAIRS IN OD MD ACCN AND PTMS MD ACCN OF OD UNDER GE AVADI.

Supply, Install, Testing and Commissioning in replacement of factory made Indoor type dust and vermin proof(IP 54 protection) feeder Pillar LT Panel board cubicle double door hinged type of suitable size 415V AC, 50Hz, fabricated of GP/CRCA sheet 3.15mm thick machine pressed and angle iron frame 50mm X 50mm X 6mm grouted in PCC , powder coated in Seven Tank process inside and outside complete including 4 Pole aluminum Bus Bar of suitable size 600 Amp mounted on porcelain insulator ,concealed hinged door with Sliding door bolt door locking arrangement and enclosed in chamber made out of 2mm sheet thick GP/ CRCA sheet machine pressed and connection from incoming and outgoing electric cable with suitable size thimbles/lugs cable gland with open able shutters on both side and danger notice plate on all the four door comprising of following all as specified and directed:- INCOMMING:-a) Busbar 4 Pole, Aluminum, 600 Amps - 01 Set (b) MCCB 400 Amp 4 Pole, 36KA, with atdjustable thermal setting alongwith spreader terminals -01No.(c) LED type Phase indicator lamp(RYB) = 03 Nos(d)Ammeter Digital type, CT operated 0-500A range, - 01 Set (e)Volt Meter Digital type 0-500 V range, With selector switch) - 01 Set Outgoing:- (i) MCCB 250 Amp 4 Pole, 36KA ,with adjustable thermal setting alongwith spreader terminals -01No.(ii) MCCB 160 Amp 4 Pole, 25KA with adjustable thermal setting alongwith spreader terminals -02Nos.(iii) MCCB 100 Amp 4 Pole, 16KA ,with adjustable thermal setting alongwith spreader terminals -01No Note:-.(i)           The panel (ii)     Before Placing the order the panel drawing should be approved by GE.(iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate.

Supply, Install, Testing and Commissioning in replacement of factory made Indoor type dust and vermin proof(IP 54 protection) feeder Pillar LT Panel board cubicle double door hinged type of suitable size 415V AC, 50Hz, fabricated of GP/CRCA sheet 3.15mm thick machine pressed and angle iron frame 50mm X 50mm X 6mm grouted in PCC , powder coated in Seven Tank process inside and outside complete including 4 Pole aluminum Bus Bar of suitable size 600 Amp mounted on porcelain insulator ,concealed hinged door with Sliding door bolt door locking arrangement and enclosed in chamber made out of 2mm sheet thick GP/ CRCA sheet machine pressed and connection from incoming and outgoing electric cable with suitable size thimbles/lugs cable gland with open able shutters on both side and danger notice plate on all the four door comprising of following all as specified and directed.:- INCOMMING:-a) Busbar 4 Pole, Aluminum, 600 Amps - 01 Set (ii) (b) MCCB 400 Amp 4 Pole, 36KA, with atdjustable thermal setting alongwith spreader terminals -01No. (iii) (c) LED type Phase indicator lamp(RYB) = 03 Nos (iv) Ammeter Digital type, CT operated 0-500A range, (with selector switch and CT 100/5 Amp) - 01 Set (v) Volt Meter Digital type 0-500 V range, Make: SECURE / L&T (With selector switch) - 01 Set Outgoing:- (i) MCCB 250 Amp 4 Pole, 36KA ,with adjustable thermal setting alongwith spreader terminals -01No. (ii) MCCB 100 Amp 4 Pole, 25KA ,with adjustable thermal setting alongwith spreader terminals -02Nos. (iii) MCCB 63 Amp 4 Pole, 16KA ,with adjustable thermal setting alongwith spreader terminals -02Nos Note:-.(i)           The panel Make should be CPRI approved (ii)     Before Placing the order the panel drawing should be approved by Engr-In-Charge. (iii) Platform for the feeder pillar board with PCC 1:2:4 15 Cm thick in foundation, Brick (Sub Class B) work in CM 1:6 ,rendering 1:6 on exposed surfaces and 100 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in padding on top and grouting legs of panel . The platform shall be of 40 cm below ground level and 60Cm height above ground level . Rate for Platform shall be included in the quoted rate.

Supply & fixing in replacement Ammeter meter 100x100mm 0-100 amps of CT ratio 100/5, Digital type volts including all electrical connection complete all as specified and directed.

Supply & fixing in replacement Voltmeter meter 100x100mm 0-500 Volts, DIgital type volts including all electrical connection complete all as specified and directed

M & L for fixing in replacement MCCB, 4P, suitable for 440 Volts, 400 Amps, 36KA, Ics=100% ICU with adjustable type, fixing to the existing panel board matching with the existing slots, including any alteration required and with extention links properly connected to the bus bar complete all as specified and as directed.

All as per item no 6.00 here in before but for 250 Amp , 4P , 36 KA , Ics=100% Icu

All as per item no 6.00 here in before but for 200 Amp , 4P , 36 KA , Ics=100% Icu

All as per item no 6.00 here in before but for 160 Amp , 4P , 36 KA , Ics=100% Icu

All as per item no 6.00 here in before but for 100 Amp , 4P , 16 KA , Ics=100% Icu