TN No.109_02

Amount

23.14 DISMANTLING WORKS: Demolishing the plastering from walls/ R.C.C. and P.C.C. members without causing any damage to the wall/ member upto any height including disposal of debris as directed for all levels.

23.7Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels

23.13 Demolishing skirting/ dado in walls/ R.C.C. & P.C.C. members without causing damage to walls/ member upto any height including disposal of debris as directed for all levels

23.12 Dismantling all types of corrugated/ trapezoidal sheet roofing including ridges, hips, valleys and gutters etc. and stacking the materials as directed by the department for all levels

23.16 Demolishing mosaic floor of various thickness, both mosiac tiles and cast-in-situ type including CC base course and removal of debris as directed for all levels.

22.3.4 Providing, supplying, mixing and champhering the edges along joint of wall/ parapet wall and raft/ roof slab having champhered dimension of 150mm x 150mm with cement sand mortar (prop.1:4) mixed with Master Proof IWP-1 of Choksey Chemicals /Dr. Sealkit No. 1 of (Asian Chemicals)/ RHEOMAC 707 of BASF@ 0.2% by weight of cement over a primer coat on the area to be champhered with a combination of 100% acrylic Polymer Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals)/ RHEOMAC 115 of BASF of Choksey Chemicals and cement in the ratio 1:2 to be applied by brush as specified & directed by the Department complete.

22.3.12 15mm thick plastering of the interior surface of concrete water tanks with cement mortar in prop 1:4 admixed with modified Styrene Butadiene Rubber based polymer like Sika Latex of Sika India Ltd./Dr. Sealkit Masterbond Latex (Asian Chemicals)/Rheomix 141 of BASF @ 200gms per bag of cement as specified and directed by the department complete.

22.9.5 Extra for Providing and applying 1mm self smoothing epoxy floor topping Nitoflor SL1000 of Fosroc (india) Ltd./ MASTERTOP 1210 PLUS OF BASF using 1mm serrated trowel and rolled with a spiked nylon roller after proper surface preparation and application of a priming coat of Nitoprime 25(M) as specified and directed by the department (surface preparation to be measured and paid separately).

Extra for Providing Non-metallic, ready to use concrete floor hardner, Chapdur of Sika India Ltd./ MASTERTOP 100 of BASF as specified and directed by the department. (a) Heavy duty

22.10.1 Repairing of spalled concrete in columns by the following processes as specified and directed by the department complete at all levels: F. Plastering with high rich polymer modified mortar 10mm thick with cement sand mortar in prop. 1:4 mixed with 100% acrylic polymer Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) / RHEOMIX 131 of BASF @ 15% by weight of cement followed by proper curing as specified and directed by the Department complete.

22.10.2 Repairing of spalled concrete in slabs/ chajjas etc. by the following processes as specified and directed by the department complete at all levels: A. Chipping of deteriorated concrete and removal of all loose & friable materials and fully exposing rusted reinforcement followed by proper cleaning and removing of rusts and other foreign materials using sand blasting/ emery cloths/ wire brush etc.

13.1.1 (a) Removing white or colour wash by steel wire brushing and/ or scraping, sand papering and preparing the wall surface smooth including necessary repairs to scratches complete.

13.10.18 Providing and applying Spectrum aggragate textured wall coating in the branded name of SPECTRUM with its all tools, plants and machineries and scaffolding etc. as per manufacturers guideline and specification of the product. a)Spectrum Rustik ( fine )

13.4.1 Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

13.3.2 Providing two coats of acrylic water based wall putty/ wall filler of Asian Paints/ Berger/ Dulux over concrete/ cement plaster/ brick walls and ceilings both internal and external after removing all the loosely adhering material from the wall/ ceiling surface with the help of emery stone, putty blade or wire brush, moistening the wall with the help of sufficient quantity of clear water as specified and directed by the department.

5.7.2.1 Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above

5.7.2.2 Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). c) Delux range Somany/ Orient/Nitco/Varmora Make i) Of size 200mmx400mm and above

8.2.1 Grading roof for water proofing treatment with (a) Cement concrete 1:2:4 (cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size)

18.3.1 Providing fitting, hoisting and fixing of roof trusses including purlins fabricated using MS circular hollow section conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed. a) TATA make Circular Hollow section- CHS of Grade YST-310 conforming to I.S. Specification : 1161-1998

8.1.23 Providing corrugated 1.20 mm thick transparent fibre sheet roofing including fitting and fixing necessary galvanised J or L hooks, bolts and nuts of 8 mm dia with bitumen washer 25 mm dia. X 3 mm thick and 1.6 mm thick limpet washer complete excluding cost of roof truss, purlins etc. (Roof trusses, purlin, etc. to be measured and paid separately).

13.6.4 Applying priming coat over new wood based surfaces up to 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter , sand papering and knotting. (a). With ready mixed paint , wood primer (pink)

13.6.5 Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. (ii).Surfaces up to 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

15.3.1 Supplying, fitting, fixing brass fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary c.p. brass screws etc. complete.( bright natural matt & satin finished ). c) Door handles iii) 150mm

POT PLANTING 20.3 Supplying and planting of terrestrial orchids with required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, river sand, cow-dung, leaf mould, fertilizer, pesticides as per specification and necessary maintenance for a period of 4 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (C) With Mokara (I) Using earthen pot of 30 cm dia.

(B) With Dendrobium (Hybrid) (I) Using earthen pot of 30 cm dia.

(D) With Vanda (hybrid) (I) Using earthen pot of 30 cm dia.

20.7 Supplying and planting of cactus in required size of pot including filling the pot to the top surface with appropriate soil media made of garden soil, sand, cow-dung, fertilizer, pesticides as per specification and necessary maintenance for a period of 6 months from the date of planting complete as specified and directed . (Mixing of different ingredients of soil media to be made in presence of Deptt. official / Specialist concerned) (A) With Peanut Cactus / Rat tail Cactus (I) Using earthen pot of 30 cm dia.

17.1 Supplying, fitting and fixing chain link fencing of 10 S.W.G, G.I. Wire 50mm x50mm mesh fitted to M.S angle iron post at 2000mm apart of specification detailed below including supplying, fitting and fixing hooks, eye bolts with nuts, staples and bolts including three horizontal lines of G.I wire 10 S.W.G at top,middle and bottom and with one vertical line to each fencing post for keeping the fencing tight and erect complete, including one coat of primer painting to M.S angle iron post in P.C.C base etc. with following. c).Stay post with M.S angle of size 35 mmx35mmx5mm and length not less than 1800mm duly slotted and bottom torqued and splayed. All M.S angle iron posts are to be fitted to P.C.C base embedded not less than 600mm (P.C.C. work shall be measured and paid separately).

Concertina Razor Coils

16.4 Providing and fixing plain with special metal, sachputty and glazing clip in steel window / doors / cleastory windows including necessary cutting to required sized for all floors. (1). Clear sheet glass panes (v). 5.00mm thick.

(WATER SUPPLY & SANITARY WORKS) PVC PIPES,BENDS,JUNCTIONS,TEES ETC. 1.37.1 Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

1.37.2 Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

1.37.3 Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches (ii) 110mm dia.

1.37.11 Supplying fiting and fixing PVC cross ‘T’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 110mm x110mm

1.39 Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (i) 160mm dia. PVC cowel of ISI make

(ii) 110mm dia. PVC cowel of ISI make

(WATER SUPPLY & SANITARY WORKS) 3.8.1 Supplying fitting and fixing overhead adjustable Chrome Plated (C.P.) spray shower 15mm dia. of Sona make with wall flange as directed and specified.(pipes will be measured and paid separately)

3.8.2 Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) (II) Lauret make (d)Overhead adjustable sleek shower with arm

3.1.6 Providing and fixing Chlorinated Polyvinyle Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This in cludes joining of pipes. (A)) Exposed or in trenches c) 25 mm nominal outer dia pipe

1.2 Providing fitting and fixing vitreous china pedestal type water closet (European type W.C pan 400mm high ) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) A) Parryware make a) White (i) Universal Closet S Trap (Cat No.C0271) (Anglo Indian) (inclusive of seat cover)

1.5 Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Parryware make a) White iv) Deluxe Dual Flush (Cat No.C8110)

1.13.1 Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (A) Parryware Make (a) White (i) Duke 660 x 495 (Cat. No.C8416/27) (white/coloured)

1.15 Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately (B) Nirali (ii) Glister Super (Bowl Size - 535 x 432 x 200) Glossy

1.19 Providing fitting and fixing Decorative Mirror complete as directed and specified. (A) Parryware Make (a) Size 800mm x 600mm

1.2 Providing fitting and fixing Glass Shelf complete as directed and specified. Glass shelf with C.P. guard rail (i) Agmeco make (a) Cubin (Cat. No.CB-00104)

1.21 Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make (i) Recess SP & SG dish (Cat.No. C9935)

1.24 Providing, fitting and fixing CP towel rail complete as directed and specified. (a) Jaquar make (ii) Continental 600mm (Cat.No. ACN-1111N)

3.2.1 Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Essco make (Delux/Sumthing spl./Tropical) (b) Long body bib cock with wall flange

3.3.2 Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) (I) Jaquar (a) Continental / Clarion (i)15mm dia Male / Female (long thread)

3.5.1 Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Jaguar make (a) Continental

3.6.1 Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) Jaquar brand a) Continental / Clarion i) Sink cock with swinging casted spout

3.10.1 Supplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. (I) Sona make

3.17.1 Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. c) 25 mm dia.

5.3.4 Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. ii) Bore hole of 100mm diameter

5.3.5 Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. G.I. pipe iv) 100mm diameter

5.3.6 Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe iii) 40mm diameter

5.3.7 Supplying fitting and fixing GI filter 2.00 metre long.

5.4.2 Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes (I) 2000 Lt capacity (a) Sintex make

5.4.6 Labour for erecting and placing PCVCTank over the stagging of 5.00m up to 8.00m complete as directed. (a) 2000 litre capacity

Flushing, clearing, washing and watering of the tube well

(ELECTRICAL WORKS): 2.2 Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finolex / RR Kabel / Nicco / Anchor or equivalent make as approved by the Deptt.) in surface or recessed 2 mm thik / heavy rigid ISI marked IS:9537 PART-III rigid PVC conduit ( berlia/ AKG / Precision/ Presto Plast / Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch ( Anchor penta / Gold medal / Kolor kany. kom/ Havells or euivalent make as approved by the Deptt.), GI / MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. 2.2.2 Medium point upto 6.00 metre. Length

2.3 Wiring to 5/6 pin 16 Amps plug point with 4sq. mm P.V.C. insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finolex / RR Kabel / Nicco / Anchor or equivalent make as approved by the Deptt.) in surface or recessed conduit wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch ( Anchor penta / Gold medal / Kolor kany. kom/ Havells or euivalent make as approved by the Deptt.), GI / MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 2.5 sq. mm. cable to third pin of the plug socket etc. as required complete, with 20mm. dia 2mm thik/ heavy ISI marked IS:9537 PART-III rigid PVC conduit ( berlia/ AKG / Precision/Presto Plast / Polycab/ MW or equivalent make as approved by the Deptt.) 2.3.2 Medium point upto 6.00 metre. Length

2.7 Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finolex / RR Kabel / Nicco / Anchor or equivalent make as approved by the Deptt.) PVC conduit ( berlia/ AKG / Precision/Presto Plast / Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm dia thik/ heavy ISI marked IS:9537 PART-III rigid PVC conduit wiring system 2.7.1 With 2 x 2.5 sq. mm. + earth continuity with 1 x 1.5 sq. mm. in 20 mm dia. 2mm thik/ heavy rigid PVC IS:9537 Part-iii conduit

2.7.2 With 2 x 4sq. mm. + earth continuity with 1 x 2.5 sq. mm. cable in 20mm dia. 2mm thik/ heavy rigid PVC IS:9537 Part-iii conduit

2.7.3 With 2 x 6 sq. mm. + earth continuity with 1 x 4 sq. mm. cable in 25mm dia. 2mm thik/ heavy rigid PVC IS:9537 Part-iii conduit

2.1 Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finolex / RR Kabel / Nicco / Anchor or equivalent make as approved by the Deptt.) including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch ( Anchor penta / Gold medal / Kolor kany. kom/ Havells or euivalent make as approved by the Deptt.) earthing 3 pin of the socket as required on switch board in surface/ recessed PVC conduit wiring system. When fitted on the same board of light and fan.

2.17 Wiring for light/fan/call bell point with 3x1.5 sq. mm P.V.C. insulated single core unsheathed industrial (multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade upto 1100 volts (Finolex / RR Kabel / Nicco / Anchor or equivalent make as approved by the Deptt.) in surface or recessed conduit wiring system with 20mm with 20mm. dia 2mm thik/ heavy ISI marked IS:9537 PART-III rigid PVC conduit ( berlia/ AKG / Precision/Presto Plast / Polycab/ MW or equivalent make as approved by the Deptt.) ceiling rose etc. complete 2.17.1 Short point up to 3.00 metre length

2.17.2 Medium point up to 6.00 metre length

2.17.3 Long point up to 10.00 metre length

11.12 Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.

11.26 Supplying and fitting of 18/20 Watt CFL lamp in the existing battern holder/angle holder/ decorative bracket/ bulk head fitting/ pendent holder etc as specified and directed by the Deptt.

11.32 Supplying and fixing of Call bell (Buzzer) including 5/6 amp capacity button piano type bell push switch including connection approved by the Deptt. As reuired

15.3 Supplying with fitting and fixing sheet steel, phosphatised, powder painted single door surface mounting MCB DB incorporated with bas-bar, neutral link, Earth bar and din rail etc fitted on the wall with grouting nuts & bolts as required complete with making necessary connection as approved, specified and directed by the Deptt. 15.3.1.1 4 way SPN single door

15.7 Supplying with fitting and fixing sheet steel, phosphatised, powder painted single door surface mounting TNP MCB DB incorporated with bas-bar, neutral link, Earth bar and din rail etc fitted on the wall with grouting nuts & bolts as required complete with making necessary connection as approved, specified and directed by the Deptt. 15.7.1 ABB, Schneider MG, legrand, Hager 15.7.1.1 4 way TNP(4+12) single door

16.1 Supplying with fitting and fixing single Pole 10 KA 240/415V 50 Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the Deptt. 16.6.1.3 6 to 32A

16.3 Supplying with fitting and fixing DP 10 KA 240/415V 50 Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the Deptt. 16.3.1.2 40A

16.6 Supplying with fitting and fixing 4P 10 KA 240/415V 50 Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the Deptt. 16.6.1.3 63A

27.1 Supplying including fitting and fixing of the following A.C. ceiling fan complete with all accessories like down rod canopy etc. of following sweeps with making necessary connection as approved, specified and directed by the Deptt. (without regulator) 27.1.3 Premium model 1400 mm sweep. (ORIENT PSPO make)/ Premium model 1400mm sweep SS-390 Deco. Havells make

27.2 Supplying including fitting and fixing of the following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved, specified and directed by the Deptt. (without regulator) 27.2.1 Domestic 27.2.1.2 Power Flow 225 mm sweep (ORIENT make)

27.6.2 Supplying, fitting of ceiling fan regulator electronic type

39.3.4 Supplying including installation, connection as approved by the Deptt, testing and commissioning of CENTRIFUGAL MONOBLOCK PUPM SET complete as directed and specified by the deptt. , 2 HP single phase CENTRIFUGAL MONOBLOCK PUPM SET ( Crompton Greaves/ Auartic / CRI/ V-Guard make) 2900 rpm with DOL starter ( Crompton Greaves / Control & switch Gear / BCH/ I & T/ seismic make)

ECBC- 3.28 Supplying fitting and fixing of LED post top lantern BGP150 LED1000/WW PSU 220-240V 7043 42 W protection IP 65/ 1K 10/ class 1 Philips make on existing GI pipe pole with foundation. ECBC-3.28.1 LED Lamp indoor

Supplying and fixing of 40 mm dia hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.) for street light water tight bracket including bending to shape and Wiring with 1.5 sq. mm size aluminium weather proof PVC cable etc.. as required.

25.1 Supplying with fitting & fixing of the following Street light luminaries complete with lamp in the existing pole including making necessary connection as approved by the Deptt.)with 2 ×1.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the department. 25.1.1 Philips make) Type TRC033 2xTL-D36W IC For lamp 2xTL-D36W/TL-40W./ Wipro make) : WSF 15240 For lamp 2x36/40W FTL (T8) / Crompton Greaves make) SFE1624HSBN For lamp 2x36/40W FTL / Havells make): LHRF 14204011 For lamp 2x36/40W FTL

SB.11.27 Supplying installation testing and commissioning of - 12x Weatherproof IR Camera, 1/4" Super HAD CCD, 600 TVL (Colour) / 700 TVL (B/W), Min Illumination 0 Lux (IR LED on), IR Distance 70 M, 12x Zoom 3.94 ~ 46.05 mm, digital 16 X, True Day & Night (ICR), IP 66 (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

SB.11.24 Supplying installation testing and commissioning of - 1/3" Super HAD CCD, 600 TVL / 700 TVLVarifocal Dome Camera, Min Illumination : 0.15 Lux @ F1.2 (Colour) , 2.4X V/F Lens : 2.5 ~ 6 mm (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

SB.11.30 Supplying installation testing and commissioning of - 4ch CIF real-time DVR, Video (H.264) / Audio (ADPCM), CIF Resolution real-time recording capability (Full 4CIF resolution recording support), Up to 4ch audio inputs and 1ch audio output, Combined BNC and VGA video output for main display (up to 1280 x 1024), SATA I/F HDD support (Internal Max. HDD x 1), DVD R/W, Built-in web viewer, '- Small IR Dome Camera, 600 TVL (Colour) / 700 TVL (B/W), IR Distance 7 m, DDNS (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

HDD 4 TB

SB. 14.150 Supplying, including Installation , Testing , Commissioning & Programming of 32 " LCD Display for advocate as per Technical specification Screen Size : 32" (80 cm) diagonal ; Viewing Angle 178 degree , Contrast (Dynamic) 2,000,000:1 ; Resolution Full-HD 1,920 x 1,080 (16:9) ; Moving Picture Resolution 800 lines ; 100 Hz Motion Picture Pro ; PC Input Mini D-sub 15-pin

5.15 Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial flexible cable conforming to IS-694: 1990 with flexible bright annealed copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface flat ISI marked casing 'n' capping (AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) system, including connection etc. as required complete as directed and specified by the Deptt. 5.15.2 With 3 x 4 sq. mm. + earth continuity with 2x 2.5 sq. mm. cable in surface flat 25 mm ISI marked casing 'n' capping system.

SB.11.37 Supplying installation testing and commissioning of 1/3", Varifocal, 5 ~ 50 mm, DC Auto Iris, CS Mount (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

SB.11.66 Supplying installation testing of Bracket for Camera Housing, Applicable Model : STH500, STH200 (SAMSUNG or equivalent HONEYWELL/PANASONIC make)

SB.11.97 Supplying installation testing of UTP CAT6 Cable without PVC conduit

SB.16.1 Supplying including installation of Inverter (Su-Kam/ Microtech/ V-Guard/ Luminous) with Battery and its case as per direction and specified by the Deptt. SB. 16.1.3 Sine wave Inverter 1400 VA/240 V

ECBC.3.23 Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED wall light fittings complete with Shade, back plate including connection cable, as approved by the Deptt.s etc. as required. ECBC.3.23.2 LED Wall Light 17W

ECBC.3.23.5 Linear LED Tube 12W

ECBC.3.20 Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED spot light fittings complete with Shade, back plate including connection cable, as approved by the Deptt.s etc. as required. ECBC.3.20.1 LED Square front spot light,3W

LED GLOW SIGN BOARD

ECBC.3.18 Supplying and fixing of Jaquar or equivalent Philips/ Wipro LED round fittings complete with Shade, back plate including connection cable, as approved by the Deptt.s etc. as required. ECBC.3.18.2 LED Round Light,6W

ECBC.3.18.4 LED Round Light,12W

MISCELLANEOUS WORK: GYPBOARD CEILING 7.2.1 Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary). (i) 9.5mm thick

GODREJ SOFA SET (3+1+1)

Godrej Interio GLAZE COFFEE TABLE Glass Coffee Table

3D WALL PAPER

HD WALL PAPER (Glass Cloth or Fabric)

Handmade Modern Canvas on Oil Painting

43X58Cm Painting Canvas Paintings in MULTICOLOUR Colour

Designer Wall Shelf

28.5 inch x 19.5 inch Painting

12 inch x 12 inch Painting

Novel Modern Vase 41 Cm White Gold Bamboo Vases in White Gold Colour by Living Essence

Decorative Showpiece

Spread Leaves Pot Plastic Artificial Flowers

Bonsai Wild Artificial Plant with Pot (35 cm, Multicolor)

Fourwalls Artificial Philodendron Plant

Fourwalls Artificial Dracaena Plant In A Ceramic Pot (41 Cm, Green) Multicolor Assorted Artificial Flower with Pot (18 inch, Pack of 1)

Handmade Wooden Decorative

3W Sunflower Decorative Wall Lamp Led

Outdoor UP-Down Light, Wall Mounted Weatherproof,3000k, IP65 6 watt(Warm White)-Pack of 1

WALL PAINTING : 13.4.1 Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

18.2.2 Steel work riveted and/ or bolted/ riveted in built up sections, frame work including cutting, hoisting, fixing in position and applying a priming coat of red- lead paint up to 4.6m height above plinth including drilling holes, supplying, fitting and fixing with bolts and nuts or welding, if necessary as directed. b) In single stanchions (columns) composed of R.S.J. or channels with caps, bases, splices, angle brackets etc. Glow sign Board Structure

3.7.2 Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

13.7.3 Applying primary coat over new steel and other metal surface upto 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

DHANANJAY BASUMATARY

CHILARAM NARZARY