Repair and Renovation of S and D Store Moga

Amount

CSR and NS ITEMS

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar (13.51)

Scraping cement plaster (8.31©)

12.5 mm thick cement plaster 1:4 (15.9)

Scraping of White wash and colour wash 8.31(a)

White Washing Three coat (16.3)

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) (16.63)

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm (16.60)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 2.50 kgf / cm²) conforming to IS : 4985, including jointing with seal ring (i) Single socketed pipes. 110mm dia (13.74(a)i)

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.(13.75 a)

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.(11.4 i)

Cement Concrete 1:6:12 with 40mm gauge stone aggregate. 10.8 b ii

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material. (!4.7)

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make:- Glass panes 4mm thick above 0.40 sqm area. 4mm (18.25 (b)

Providing & Fixing in postion C.I.bib cock as per IS:210 with stainless steel spindle of approved make (to the approval of Engineerin- charge ) complete in all respect. 15mm 330.65 (a)i

Triple layer water storage tank 30.97 (a)i

Providing, laying, jointing, fixing and testing ISI Marked uPVC Pipe with G.I. specials as per ISI-4985, including cost of G.I. specials such as tees, bends, sockets, elbows etc. testing inside building complete.

20mm dia (28.11(A)a)

25mm dia (28.11(A)b)

Providing and fixing aluminium work for doors, windows, ventilators and partitions for fixed portion 17.45(a)

For shutters of doors, windows &ventilators including providing and fixing 17.45(b)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc float glass 5mm thick 17.47(i)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed 17.46(ii)

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm×16mm (17.49(a))

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm 17.23(ii)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. III (size of door 851mm to 1000mm) CSR Specification 17.43©

Dismantling concrete or precast concrete.Cement concrete plain 1:2:4 8.6(d)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish (16.65)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on old wood work, metallic or plastered, concrete surface to give an even shade.(16.18)

Providing and fixing in position Chinaware European type water closet P trap or S trap (to the approval of the Engineer-in-charge) suite-consisting of 10 ltr. PVC flushing cistern supported on angle iron bracket,(30.4)

Providing & fixing in position best Indian make (to be approval of the Engineer-incharge) vitreous Chinware white flat back or angular lipped front urinal size 440 x315 x265 mm C.P. brass flexible tube connection 450 mm long.(30.15)

Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) complete in all respect.(30.37)

Providing & Fixing in postion 15mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. C.P. brass Bib cock long nose/ long body foam flow without flange 30.65(A)i

Providing and laying 60 mm thick factory made cement concrete interlocking Paving blocks of M- 5 grade manufactured by block making achine equipped with steel mould 14.138

S&F false ceiling tiles 600mm*600mm size of Armstrong make after removing old tiles (NS)

Providing and fixing in position towel rails /ring fixed in with rawl plugs embeddedin walls with brass screws, complete in all respects including cutting and making good the walls etc.C.P brass towel ring 30.58(b)

Providing and fixing in position best Indian make soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the walls etc.30.60

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming 14.72

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottlegreen, blackof size 200 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (14.129)

RECESSDED PVC CONDUIT TYPE

Fan point 34.02i(b)

LIGHT POINT 34.02ii

WIRING 6 AMP 34.02v

Wiring 3 pin 16/20 amp 34.02vi

PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade

Overall size 1.5sq.mm (Un-sheathed) 34.09II

Overall size 2.5sq.mm (Un-sheathed) 34.09III

SHEET METAL DOUBLE DOOR DISTRUBITION BOARD

Supply and erection of double door distribution boasd as per CSR ref 34.17(iii)

Providing and fixing double action hydraulic floor spring of approved brand 17.48

S&F general purpose tube fittings 20watt Havels's make (NS)

Carriage of materials beyond 5km

Crusher, Stone Ballast (AOR)

Coarse sand (AOR)

Cement (AOR)

Fine sand (AOR)

Difference of quarry rates

Crusher12/13.2 mm (AOR)

Crusher 10/11.2 mm (AOR)

Coarse sand (AOR)

Stone metal 40 mm (AOR)

Bricks (AOR)

Notes: -

The rates for items above are through rates exclusive the cost of Cement & Steel . That shall be issued by the PSTCL free of cost from Ablowal/Jamsher store.

For all the above items ref. to CSR or NS items is given in short and complete nomenclature of CSR as well as NS items originally approved by CE/ TS, PSTCL, Patiala or CE/P&M, PSTCL, Ludhiana will be applicable along with general specifications.

For any NS item, which is not covered in the DNIT, shall be allowed on the same pattern of AOR with the prior approval of Er-in Charge.

GST will be applicable as per Govt. norms.

G AND J CONTRACTORS

M/s Mukul Kumar Prajapati