Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹23.7 L+₹3.4 L (16.6%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹24.0 L+₹3.7 L (18.0%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹30.6 L+₹10.2 L (50.2%)Rejected-Finance 0 PUKHTA BAZAR JAHANGIRABAD RURAL BULANDSHAHR UTTAR PRADESH 203394 | BULANDSHAHR | UTTAR PRADESH | 203394 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
12 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAGROTA
GE NAGROTA
REPAIRS TO ROOF, CEILING, LEEKAGE AND SEEPAGE, WALL PLASTERING, JOINERY WORK, SANITARY FITTINGS AND PETTY REPAIRS ETC AT JCO/OR OTM AND MD ACCN AT CMP, STN HQ, 151 TA AND KATRA AREA AT NAGROTA MIL STN UNDER AGE BR-I OF GE NAGROTA.
2023_MES_614030_1
GEN-8562/E8
Open Tender
Civil Works
Item Rate
270 days
NAGROTA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE NAGROTA
₹80,000
Yes
19 Feb 2024
17 Aug 2023
19 Sept 2023
17 Aug 2023
12 Sept 2023
31 Aug 2023
Amount
SCHEDULE ‘A’ PART-I Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced complete. complete all as specified and directed.
Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.
M&L for 50mm thick cement concrete M-10 nominal mix type C2 using 20mm graded Agg as in plinth protection and similar works finished even and smooth without using extra cement complete all as specified & directed.
M&L PCC 75mm thick 1:4:8 type D 2(40mm graded) as in sub base complete all as specified & directed..
M & L Chequered cement concrete tiles of size 20cm x 20cm x 25mm thick (with grey cement and pigments) set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:6,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding complete all as specified & directed.
M & L light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles including 15mm thick 1:6 cm screed bed for laying the floor finishes.
M & L light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tilesover & including 10mm thick 1:6 cm screed bed. complete all as specified & directed.
M & L for Mat Finish(Non-Skid) coloured tiles straight edge, standard economic class-II a grade of size of each tile exc 0.11 sqm but n exc 0.18 sqm , thickness not less than 6mm as in floor etc set joined in neat cement slurry and poined with coloured cement laid over and incl 15mm thick bedding layer in CM 1:6 complete all as specified & directed..
M & L Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 15mm thick screed bedding layer of cement mortar in CM 1:6 complete all as specified & directed.
M & L glazed coloured ceramic coloured tiles of size 350x 250x 7mm/ 450X 350X 7mm set and jointed in white or coloured cement to match on vertical surfaces such skirting ,dados, rises to steps etc over & incl 15mm thick rendering in cement mortar in 1:6 complete all as specified & directed.
Taking down chowkat or frames with shutter (without taking off shutter from the frame)area exc 1.5 Sqm but n.exc 4.0 Sqm each complete with hold fasts etc. complete all as specified & directed.
Taking down chowkat or frames with shutter (without taking off shutter from the frame) area n exc 1.5 Sqm each complete with hold fasts etc. complete all as specified & directed.
Taking down shutter of any description area exc 1.0 Sqm but n.exc 2.0 Sqm complete all as specified & directed.
Hacking out old broken glass of any thickness ,size, quality or description n exc 1.5 sqm from wooden /metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc complete all as specified & directed.
S& F 3 mm thick sheet glass, ordinary quality type and glazing with oil putty in squares n exc 0.50 Sqm in each pane complete
S & F 2nd class HW plain, solid, straight chowkat and frames wrought frame rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed.complete all as specified & directed.
S & F for 40mm thick 2nd class H.W plain framed, panelled shetter(any number of panels ) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density , wood particle board with commercial face veneers supplied and fitted to chowkhats complete all as specified & directed.
S & F for 35mm thick 2nd class H.W wire/ glazed door shutter edged of frame plain chamfered or rounded fitted with cut and mitred beads for securing glass/gauge etc size of members of shutters as specified and fitted to chowkhat. complete all as specified & directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid,bedded and pointed in any mortar complete all as specified & directed..
M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with providing 15mm thick screed bed in cement mortar 1:4.complete all as specified & directed.
S & F galvanised mild steel wire cloth 0.46mm nominal dia of wire and average width of aparture 1.18mm fixed with tinned tacks or galvanised wire stapple complete all as specified & directed.
M&L for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified & directed.
M&L for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified & directed.
S & F 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified & directed..
Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified & directed.
S&F Factory made PVC solid door/window/ventilator frame of size 50mmx47mm made out of 5mm prelam sheet in stead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M S square tube complete frame fixed with screws/nails /bolts to walls complete all as specified & directed.
M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S & F Factory made fully glazed (frosted/ground/obscured)PVC window/ventilator shutter 30mm thick(Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top and bottom rail on either side and as gap inserted for top and bottom rail(rate incl glass panes)complete all as specified & directed.
S & F mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes incl bolts if required, hooks, hasp and staple, clamps, hold fasts , wall ties, hooks for hanging fans, plain angle cleats etc and similar works complete all as specified & directed.
Supply and fixing factory made box type steel window/ventilators including one shop coat of red oxide primer, hinges, tower bolts 100 mm, steel handles and steel peg stay complete without glazing bars devetailed or welded complete all as specified & directed.
M&L PCC 1:3:6 type C1 in hold fast etc incl all necessary formwork.
S & F MS butt hinges 100mm medium weight cold rolled complete all as specified & directed..
S & F MS butt hinges 75mm medium weight cold rolled complete all as specified & directed..
S & F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed.complete all as specified & directed.
S & F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified & directed..
S & F Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed..
S & F Aluminium anodised handle 150mm cast type complete all as specified & directed..
S & F Aluminium anodised handle 100mm cast type complete all as specified & directed. .
S & F MS helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified & directed.
Supply only integral water proofing compound of approved quality and make confirming to IS complete all as specified & directed..
M& L for two coats of synthetic enamel paint on wooden surface over a coat of Pink Primer incl preparation of surface area over 10cm width or girth complete all as specified & directed.
Taking up or down GI tubing 15mm bore with all connection complete all as specified & directed.
S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor. complete all as specified & directed.
Fixing only 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified & directed..
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified & directed.
S&F 10 Ltr PVC valve less symphonic action type flushing cistern low level white/coloured with inlet ball valve float , handle, PVC pipe to WC and incl PVC connection 600mm long complete fixed in repairs complete all as specified & directed..
S&F CP bib tap 15 mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule fixed in repair complete all as specified & directed.
S&F in repairs Fancy stop cock 15 mm dia cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for unioncomplete all as specified & directed.
S&F vitreous china wash down water closet pan(pedestal pattern) white/coloured match to the tiles (excluding flushing cistern) fixed in repairs complete all as specified & directed.
S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed in repair.complete all as specified & directed.
S&F vitreous china squatting pan Orrisa pattern 580x440mm white with integral foot rest (excluding flushing cistern) fixed in repairs complete all as specified & directed.
S & F vitreous china wash basin , white flat back of size 550x400mm fixed in repair including cutting for and pining in ends of brakets including 15mm dia piller tap cast copper alloy with capstan head cromium plated screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified & directed.
S & F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair. complete all as specified & directed.
S & F sinks made of stainless steel 1mm thick Kitchen or Laboratory with plugs , washers and waste pipe and CP waste couplings etc, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm as fixed in repairs complete all as specified & directed.
S & F in repair swivel shower of PTMT, any colour for fixing with 15mm pipe (minimum weight 40 gms) complete all as specified and directed.
Taking down AC pipe in any type laid in trenches, floor or fixed wall etc including accessories complete all as specified and directed.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of bore 75mm complete all as specified & directed..
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of bore 110mm complete all as specified & directed..
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of bore 75 mm.complete all as specified & directed.
S&F PVC (SWR) vent cowl bore 75 mm.complete all as specified & directed.
S&F PVC (SWR) 75 mm bore bends (any radius) fixed with cement joint. complete all as specified & directed.
S&F PVC (SWR) 110 mm bore bends (any radius) fixed with cement joint. complete all as specified & directed.
S&F 110 x 75mm bore PVC (SWR) reducer fixed to walls with cement joint complete all as specified and directed.
S&F PVC (SWR) 110 mm bore branch piece (Tee) fixed to walls with cement joint with or w/o ovel access door complete all as specified and directed.
S&F in repairs square grating 150 mm size of PTMT (minimum weight 100 gms) complete all as specified and directed
Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work.complete all as specified & directed.
M&L Providing, cement concrete Type B-0 (1:2:4) (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified & directed.
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified & directed.
Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces complete all as specified & directed..
M&L Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified & directed..
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.
M&L Removing old tarfelt or polythene film including taking down plaster of sunken floor , roughening and cleaning by brushing with wire brush to remove all dirt and apply a coat of cement slurry with 3.00 Kg of cement per sqm and Rendering 15mm thick in CM 1:3 using WPC finished rough (sunken floor/wall) and then applying two course treatment as follow :-(i) Applying bitumen primer @ 0.40Kg/Sqm (ii) Laying APP (Atactic polypropylene) modified membrance 3mm thick and weighting not less than 3 Kg/Sqm with 100 GSM/Sqm non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap. The membrane has to be laid with LPG torch and over lap sealed and finished neat.complete all as specified & directed.
M&L for Preparation of old decorated plastered or unplastered surface including cleaning by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying one coat of white wash on walls complete all as specified & directed.
All as per item No 74 above but one coat of white wash on ceiling.complete all as specified & directed.
All as per item No 74 above but applying one coat of oil bound distemper on walls complete all as specified & directed. .
All as per item No 74 above but applying two coat of oil bound distemper on walls.complete all as specified & directed.
M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified & directed..
All as per item No 78 above but applying one coat of cement base paint on walls of external surfaces complete all as specified & directed...
All as per item No 78 above but applying two coat of cement base paint on walls of external surfaces complete all as specified & directed..
M&L for preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.
M&L for Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed.
Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified & directed.
M&L for 15mm thick plastering in CM 1:4 on stone surfaces (EXTERNAL), surface finished even and smooth without using extra cement, complete all as specified & directed.
M&L for 15mm thick plastering in CM 1:6 on stone surfaces (INTERNAL), surface finished even and smooth without using extra cement complete all as specified & directed..
M&L for Two coats of oil bound distemper on newly plastered surface over a coat of chalk whiting, on plastered surfaces, preparatory to distemping including preparation of surface complete all as specified & directed.
M&L for preparation of newly plastered surface of wall and applying three coats of white wash surfaces complete all as specified & directed.
M/S Shankardass Devidass
R.K. Works
SUNIL AND CO
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .