Special repair of replacement of roof of Administrative Block in Govt. ITI at Kaithal (Pdg. E.I./ Estate EI only).

Amount

Supply and erection of PVC copper insulated and sheathed 2-core circular flexible wire. 31.9 (i) dSize 1.50 sqmm ( 48 / 0.20mm).

Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections . 31.12(a) (xiv) Cat-B Triple pole switch with neutral link 32 amp. 415 Volts.

Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. 31.12 © (i) 15 amp.to 60 amp. 415 V ,10 KA 3-phase.

31.12 c (ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

Supply and erection of sheet steel enclosures distribution boards suitable for MCBs etc. on wall/ existing boards / pedestal with rag bolts including bonding to earth . 31.12 (d) (iv) SPN Distribution board 4-way.

31.13 Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. Size 40 mm x 40 mm x 6 mm.

31.14 (i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

31.15 Supply and erection of sheet steel enclosure 2 pole / 3 pole with earth plug and socket suitable for incorporating single pole / triple pole MCB on wall / on existing pedestal complete with necessary connections etc. S.P.N. enclosure for single pole MCB 20 amp.

Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. 31.17a) (ii) SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.

31.17(a) (ii) TPN MCB of 9 KA breaking capacity 6 amp. to 32 amp.

31.17(a) (iii) TPN MCB of 9 KA breaking capacity 40 amp. to 63 amp.

31.18 (vii) Call bell 220 / 230 volts A.C. bakelite with double coil.

31.18 (xi) Bakelite angle / straight button holder large size.

31.18 (xii) Switch 5 amp. On existing sheet.

31.18 (xiii) Wall socket 5 amp. On existing sheet.

31.18 (xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job. .

31.20 (i) Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to the site of work.

31.20 (iii) Erection of exhaust fan complete with necessary earthing of fan and regulator including carriage from local railway station /goods transport /PWD store to he site of work.

31.20 (vi) Pdg. and fixing of required size of deodar wood frame of section 50 mm x 32 mm for fixing exhaust fan upto 450 mm sweep.

Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. 31.21 (xxi) Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

31.21 (xxii) Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

31.21 (xxiv) Heavy guage welded conduit pipe 40 mm dia 2.00 mm thickness flushed.

31.21(xxvii) Galvanised iron flexible pipe comlete with socket nipples and checknuts etc. at both ends ( upto length of 1 metre.) Size 25 mm dia.

31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

31.22(xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size.

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . 31.26 (iv) Ard. 10 Sq. mm 2 Core Cable .

31.26 (xxxiii) Ard. 240 Sq. mm 3.5 Core Cable .

31.26 (xIi) Ard. 25 Sq. mm 4 Core Cable .

31.26 (xIiii) Ard. 50 Sq. mm 4 Core Cable .

31.30 (III) (xiv) Erection of street light fitting on the pole including the cost of petty material required ( irrespective of height / length of bracket ). Pole above 7 metres but upto the height of 8 metres .

31.30 (VI) Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 9 metres long 105 mm x 115 mm at top and 105 mm x 315 mm at bottom with working load of 200 Kg. burried 1.80 m in ground.

31.31 Supply and erection of metal clad bus bar chamber made from 1.6 mm thick M.S.sheet fixed with rag bolts on wall or on existing pedestal / angle iron frame including bonding to earth , detatchable top and bottom painting and necessary connections etc.(Copper bars duly tinned ). 100 amp. 4 bars of 55 cm each (cross section 25 mm x 3 mm) chamber over all size 60 cm x 45 cm x 18 cm .

31.36 Wiring in 1.5 sq.mm PVC Insulated Copper conductor cable in 1.6 mm thick conduit pipe. Fan Point Medium Point

Long point.

Light Point Short point

Medium Point

Long point.

Call bell point including M.S box of size 180 mmX100 mmX 60 mm deep for Call bell. Long point.

3 pin 5 amp. plug point including earthing the 3rd. pin etc. Short point

Medium Point

Long point.

3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc. Long point.

31.40 Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe . Size 1.5 sqmm ( 3/0.81 )

Size 2.5 sqmm ( 3/1.05 )

Size 4 sqmm ( 7/0.85 )

Size 10 sqmm ( 7/1.35 )

31.41 Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4-way , TP&N ( Horizontal) (8+12)

8-way , TP&N ( Horizontal) (8+24)

31.44 Supply and erection of PVC pipe ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work. 25 mm dia.

31.48 Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work.

31.55 Supply & erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Delux model No. 50440 ISI / SSK make PC 561 operated on 120/280 V A.C. Supply complete including cutting of existing Bakelite sheet and making necessary connection etc. up to the entire satisfaction of the Engineer-in-Charge of the Work.

31.67 S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work HDPE pipe 63 / 50mm outer dia / inner dia.

31.69 Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 4 pole MCCB 6 amp to 63 amp

4 pole MCCB 100 amp

4 pole MCCB 200 amp

4 pole MCCB 300 amp to 400 amp

31.76 Supply and erection of metal clad bus bar chamber made from 1.6 mm thick M.S.sheet fixed with rag bolts on wall or on existing pedestal / angle iron frame including bonding to earth Copper bars 63 amp. 415volt 4 bars of 325mm each (Cross section 20x3mm) duly tinned over all size of the chember 375mmx295mmx140mm.

NS items Supply and erection of MS box of size 8'' x 10'' x 4'' (20cmx25cm) and 10cm deep made of 1.6mm thick M.S. sheet covered with 5mm thick bakelite sheet for fixing of 4 Nos. socket and switch of 6 amp. and one No. of multi socket and switch of 15 amp. including fixing of one No. fuses unit and indicator off another make. the M.S. box is recessed in wall including cost of necessaru cement and mixture required to complete the job in all respect upto entire satisfaction of the Engineer-in-charge of work.

Providing & fixing of stay set with stay wire complete in all respect upto the entire satisfaction of Engineer-in-Charge. NS

S/E/T/C of 43/45 watt Luminiare Wipro Model No. LR02-501-XXX-57-XX and equivalent model of Philips, Bajaj complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work.(N.S)

Supply of LED 45 Watt. Luminiare Driver Make Polycab complete the job in all respect upto the entire satisfaction of Engineer-in-charge of the work.(N.S)

S/E/T/C of 120 watt LED Street light Luminaires make Bajaj / Crompton / Philips / Wipro with Pressure die cast aluminium housing with lens and accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer-in-charge of the work.(N.S)

Ms Royal Enterprises