REPAIRS TO ROOF COVERING ,FALSE CEILING, JOINERY, PLATERING, FLOORING, PLUMBING, SANITARY FITTINGS AND CONNECTED WORKS AT MD ACCN AND SF ACCN OF JCOs AND ORs AT LAXMI TEK AREA AND ABNS LINES AND MES KEY PERSONNEL QTRS UNDER GE BELGAUM

Amount

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit completer. all as specified and as directed.

Descrition all as per item No 01 here in before but bedded in lime or cement mortar

Material and labour for Roof tiles ,Manglore pattern,interlocking at side joints ,laid dry complete all as specified and as directed. Note :Make of Mangalore Tile : Charminar/Raja Tiles/RECHO,Prajapat

Material and labour for Ridge or hips tiles to suit Mangalore pattern of roofing tiles ,bedded and jointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed . Note :Make of Mangalore Tile : Charminar/Raja Tiles/RECHO,Prajapat

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm and removing rubbish off the premises and old unserviceable battens/shingles taken as credit completer. all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated steel sheeting any gauge and taken as credit complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter fixed with self tapping screws including dismantling of existing plain or corrugated steel sheeting any gauge and taken as credit complete all as specified and as directed. Note :Make of Galvalume sheet : TATA Blue Scope Ltd/JSW (Colouron)/LLOYD

Supply and fix Rolled mild Steel work in roof trusses (framed),trussed,purlins ,crane gantries ,rails and fastening and heavy brackets framing (beams,tee,angle,channel or flat sections) incl distance pieces ,cleats etc confirming to Fe-410-W(Gde-E-250)quality-B complete all as specified and as directed.

Supply and fix Mild Steel work as in wind ties etc. for roof including securing bolts and cutting tops to shape as directed ,drilling holes ,notching for wire etc conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Material and labour for 4mm thick High Pressure Steam Cured (HPSC) non asbestos fibre cement building board in false ceiling with aluminium anodized snap grid of 60x60cm with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying two coats of oil bound distemper on ceiling including preparation of surface and dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works and taken as credit including making good disturbed wall/ ceiling surfaces and necessary refixing of electrical fittings /extension of fan rods ,connecting with existing electrical wires complete all as specified and as directed. Note :(i)Make of HPSC Board:Everest /Armstrong (ii) Thickness of anodisation shall be of 15 microns (iii) Make of aluminium snap grid :JINDAL/INDAL/HINDALCO

Taking down chowkhat with shutters (without taking off shutters from the frame) area n exc 1.50 Sqm each and taken as credit complete all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n exc 4 Sqm each and taken as credit complete all as specified and as directed.

Taking down shutters of any description n exc 1sqm each and taken as credit complete all as specified and as directed.

Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each and taken as credit complete all as specified and as directed.

Material and labour for 2nd class hard wood chowkhat or frames, plain, solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints, fixed in position completeall as specified and as directed.

Material and labour for Factory made 35 mm thick second class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 12mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Material and labour for Factory made 35mm thick 2nd class hard wood glazed/ gauged shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Material and labour for Factory made 30mm thick 2nd class hard wood glazed/ gauged window/ ventilator shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b) and fitted to chowkats complete all as specified and as directed.

Material nad labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on both sides reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Material and labour for Factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of Mild steel. tubes for top and bottom rails. Mild steel. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

Material and labour for Aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 4mm sheet glass ordinary quality for panels and provision of all hardware fittings such as aluminium anodized handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed. Note :(i)Make of sheet glass: saint Gobain/Modi guard/Gold fish (ii) Thickness of anodisation shall be of 15 microns (iii) Make of aluminium anodized section :JINDAL/INDAL/HINDALCO

Supply and fix for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, locking arrangement, etc. complete all as specified and directed.Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) Make of Aluminium sections : Jindal Hindalco/Indal (iii) Thickness of anodisation shall be of 15 microns

Supply and fix MS butt hinges 100mm in size, medium weight, cold rolled complete all as specified and as directed.(ISI MARKED)

Supply and fix Stainless steel butt hinges 100 mm in size, medium weight, complete all as specified and as directed.(ISI MARKED)

Supply and fix in 300mm long mild steel helical door spring, ordinary rat tail pattern spring, including roller and roller plate complete fixed to wooden/ steel chowkats complete all as specified and as directed. (ISI MARKED)

Descrition all as per item No 25 here in before but fixed in repairs

Supply and fix Aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and as directed.Note:Make :Classic/Crown/Atul

Descrition all as per item No 27 here in before but fixed in repairs

Supply and fix Aluminium handle, 'D' type, anodised 150 mm in size complete all as specified and as directed..Note:Make :Classic/Crown/Atul

Descrition all as per item No 29 here in before but fixed in repairs

Supply and fix Aluminium handle, 'D' type, anodised 125 mm in size complete all as specified and as directed..Note:Make :Classic/Crown/Atul

Supply and fix 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia complete all as specified and as directed. .Note:Make :Classic/Crown/Atul

Supply and fix in repairs 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia all as specified and directed. Note:Make :Classic/Crown/Atul

Supply and fix in repairs 50mm size cupboard lock, brass, two lever, grade 1 complete all as specified and as directed.Make :Godrej/Harrison/Dhanraj

Supply and fix in repairs 50mm size drawer lock, brass, two levers, grade 1 complete all as specified and as directed..Make :Godrej/Harrison/Dhanraj

Supply and fix in repairs floor door stopper of brass body and tongue, with 140mm long cover plate and hard drawn steel spring, fixed in floor complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed in panel of joinery with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed in panel of joinery with stainless steel wire staples complete all as specified and as directed.

Supply and fix in repairs,harrison rail , mild steel,chromium plated curtain rods, fancy type, 25mm dia including brackets ,stops and rollers with end designer caps complete all as specified and as directed.

Hacking out old broken glass (any thickness,size , quality or description) from wooden frames ,glazed with putty or fixed with beads and removal of debris from site complete all as specified and as directed.

Material and labour for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed. Make :Saint gobain/Modi Guard/Gold fish Note: The Glass panes shall be fixed to external windows of buildings upto 3 stories height.Necessary safety measures shall be provided by the contractor for the workers engaged by him .The rate quoted by the contractor for this item shall be inclusive of the above provisions.

Descrition all as per item No 41 here in before but of size exc 0.50 sqm

Material and labour for 4mm thick figured glass ,pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed..Make :Saint gobain/Modi Guard/Gold fish Note: The Glass panes shall be fixed to external windows of buildings upto 3 stories height.Necessary safety measures shall be provided by the contractor for the workers engaged by him .The rate quoted by the contractor for this item shall be inclusive of the above provisions.

Descrition all as per item No 43 here in before but of size exc 0.50 sqm

Material and labour for 18mm thick prelaminated particle board, interior grade, prelaminated on one side with decorative choice lamination and on the other side with white lamination, as in cub board shelves/ cabinet works fixed with screws, fixed in repairs complete all as specified and as directed . Note :Make :Kitply/Century Ply Wood/ Green Ply

Material and labour for 18mm wide x 6mm thick external teak wood lipping around edges of particle board/ plywood including french polishing, fixed in repairs complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C1, using 20 mm graded stone aggregate and setting in CM 1:6 including demolition of old unserviceable precast concrete masonry of any description and taken as credit complete all as specified and as directed

Material and labour for PCC 1:3:6,type C-1 ,using 20 mm graded stone aggregate as in coping ,bed blocks, eaves filling between wall and tile/sheet roofing ,as in chowkhat and similar work including necessary form work complete all as specified and as directed.

Taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc.complete all as specified and as directed..

Material and labour for Rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound. Make :Impermo'Roff/Cico

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls, cornices, pillasters, etc and aplying two coats of oil bound distemper (Acrylic distemper washable) over a coat of chalk whitening primer over a coat of 1mm thick wall care putty complete all as specified and as directed.

Material and labour for applying two coats of 100 % premium acrylic emulsion paint having VOC less than 50 gm/litre and uv resistance as per IS 15489:2004, alkali & fungal resisatance , dirt resistance , exterior paint of required shade (Company depot tinted ) with silicon additive @1.43 Litres /10 sqm over and including priming coat of exterior primer applied @ 0.90 Litres /10 sqm over new surface complete all as specified and as directed.

Material and labour for Preparing old plastered surfaces of wall , cornices, pillasters, etc by washing, rubbing down and stopping etc and applying one coat of oil bound distember(Acrylic distember washable) complete all as specified and as directed.

Material and labour for Complete removal of existing treatment on wall with wire brush ,scrapping down smoke soot ,mould , moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base putty and and preparation of old decorated surfaces of wall applying two coats of Oil Bound Distember over a coat of alkali resistent primer over 1mm thick wall care putty complete all as specified and as directed.

Material and labour for Preparation of newly plastered walls, cornices, pillasters, etc and applying two coats of cement based paint any colour over a coat of alkali resistent primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises complete all as specified and as directed.

Material and labour for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in sub base for flooring including necessary form work complete all as specified and as directed.

Material and labour for Coloured vitrified tiles, square or rectangular, light shade, 9 to 10mm thick, area of each tile not exc 0.36 Sqm, as in floors/ skirtings, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and asdirected.Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Coloured Non skid ceramic tiles, 7mm thick, area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Coloured joint free edge cut ceramic tiles, 8 to 9mm thick, area of each tile exc 0.18 Sqm but not exc 0.38 Sqm as in floor, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Make of Tile :HR Johnson/Khajaria/Naveen

Material and labour for Coloured glazed ceramic tiles 300mm x 450mm x 7 to 8mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 complete all as specified and as directed. Make of Tile :HR Johnson/Khajaria/Naveen

Dismantling of stone slab/ tiles, paver blocks of any description and any thickness in floors laid, bedded and pointed in any mortar including removal of rubbish off the premises completeall as specified and as directed.

Demolition of Plain cement concrete in ground floors and pavings not exceeding 15 cm thick below or above ground level in any mortar including removal of rubbish off the premises completeall as specified and as directed.

Material and labour for PCC 1:4:8 (type D-2) using 40 mm graded stone aggregate , 75 mm thick as in sub base to floor including necessary form work complete all as specified and as directed.

Material and labour for PCC 1:2:4 (type B-1) using 20 mm graded stone aggregate , 100 mm thick as in floor including necessary form work complete all as specified and as directed.

Material and labour for Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block 55 - 60mm thick , M-35 grade ,any shape and size with glossy finish on top and grey cement confirming to IS 15658-2006 .complete all as specified and as directed.

Material and labour for 50mm thick sand cushion under interlocking paver blocks including watering and consolidation complete all as specified and as directed. Note : Consolidated thickness shall be measured for payment.

Material and labour for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces as backing coat of skirting, dado etc complete all as specified and as directed

Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixedwith pigment to match the shade of the slab including rubbingand polishing complete all as specified and as directed

Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and as directed

Material and labour for Plain cement concrete 1:3:6, type C1, using 20 mm graded stone aggregate, 75mm thick as in plinth protection, finishing the surface fair and even, in panels and filling joints with mortar, etc. complete all as specified and as directed

Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete on walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and taken as credit and making good disturbed surfaces to match with the existing surface complete all as specified and as directed. Make of CPVC Pipe :Astral/Ashirwad

Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete on walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and taken as credit and making good disturbed surfaces to match with the existing surface complete all as specified and as directed. Make of CPVC Pipe :Astral/Ashirwad

Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete on walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and taken as credit and making good disturbed surfaces to match with the existing surface complete all as specified and as directed. Make of CPVC Pipe :Astral/Ashirwad

Supply and fix in repairs 15mm bore Facy type CP brass bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.Make : Prayag/Waterman /GEM

Supply and fix in repairs 3 way mixer tap for mixing hot and cold water, fancy type, brass chromium plated screwed down for 15mm bore GI pipe complete all as specified and as directed. Make: JAQUAR/ JOHNSON/ CERA

Supply and fix in repairs 15mm bore PTMT bib tap, standard type, (Minimum weight 90gms) any colour, high pressure screwed for iron pipe complete all as specified and as directed. Make :M/S Prayag/M/s Shakthi Industries

Supply and fix in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in pipe complete all as specified and as directed.Make: JAQUAR/ JOHNSON/ CERA

Supply and fix in repairs 15mm bore stop valve, fancy type brass CP screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions complete all as specified and as directed.Make : PrayagWaterman /GEM

Supply and fix in repairs 15mm bore pillar tap, brass chromium plated, with capstan heads, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.Make : Prayag/Waterman /GEM

Supply and fix in repairs Vitreous china oval shape wash basin, white, size 550x400mm including CI brackets and cutting for and pinning in ends of brackets or errecting stands etc complete all as specified and as directed.

Supply and fix in repairs Vitreous china squatting pan, Orissa pattern of size 580 x 440 mm, white, with integral foot rest including 'P' or 'S' trap and provision of lime concrete bedding complete all as specified and directed.

Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap, plastic water closet seat of any colour as approved by GE, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, fixing bolts etc, connecting to drain pipe and flushing pipe including provision of PVC flush pipe complete all as specified and as directed.

Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets etc complete all as specified and as directed.

Supply and fix in repairs 1mm thick stainless steel sink, overall size 495x420mm, bowl size 410x330x160mm, kitchen with plug, washers & wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets & connecting union to pipe complete all as specified and as directed.Make :Nirali/Blue Star/Commander

Supply and fix in repairs PVC flexible pipe (waste pipe) \suitable for 32 mm bore waste coupling of sink/wash hand basin complete all as specified and directed. Make :Finolex/Supreme/Prince

Supply and fix in repairs Waste coupling of PTMT with necessary washers ,half or full threated ,minimum weight 45 gms,suitable for 32 mm bore discharge pipes of WHB /Sink complete all as specified and as directed . Make :M/S Prayag/M/s Shakthi Industries

Supply and fix in repairs Brass chromium plated towel rail of size 600mm long ,20 mm dia with and including Chromium plated brass screws & wooden/ plastic cleats complete all as specified and as directed.(ISI MARKED)

Supply and fix in repairs Brass chromium plated perforated shower rose swivel type 125mm size suitable for fixing with 15mm bore pipe including 300mm long brass CP shower arm complete all as specified and as directed.(ISI MARKED)

Supply and fix in repairs PVC connection 15mm size with PTMT nuts, 600mm long complete all as specified and as directed. Make :M/S Prayag/M/s Shakthi Industries

Supply and fix Stainless steel grating doom ,125 mm dia (minimum weight 40 gms) with waste hole complete all as specified and as directed. Make :M/S Prayag/M/s Shakthi Industries

Supply and fix in repairs Stainless steel grating doom ,125 mm dia (minimum weight 40 gms)with waste hole complete all as specified and as directed. Make :M/S Prayag/M/s Shakthi Industries

Demolition and breaking up drain pipes (Salt glazed ware,AC or Reinfoced concrete ) set in cement mortar and removal of debris off the premises complete all as specified and as directed.

Supply and fix 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make :Finolex/Supreme/Prince

Supply and fix 110 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, laid in trenches or in floors completeall as specified and as directed . Make :Finolex/Supreme/Prince

Supply and fix 75 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. .Make :Finolex/Supreme/Prince

Supply and fix 75 mm bore UPVC (SWR) pipes, single socketed, in any length, with solvent cement joints, laid in trenches or in floors completeall as specified and as directed . Make :Finolex/Supreme/Prince

Supply and fix 50mm bore LDPE pipes of pressure rating 6 kg/ Sqcm and fixed complete to walls, ceilings, or in floors complete all as specified and as directed. Make :Finolex/Supreme/Prince

Supply and fix 32mm bore x 900mm long LDPE pipes of pressure rating 6 kg/ Sqcm and fixed complete to wash basin/ urinal complete all as specified and as directed.Make :Finolex/Supreme/Prince

Supply and fix 75mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed. Make :Finolex/Supreme/Prince

Supply and fix 110 mm bore UPVC (SWR) bends any radius with access door complete all as specified and as directed. Make :Finolex/Supreme/Prince

Supply and fix 110mm bore UPVC (SWR) branch piece, single Y, equal or unequal with access door complete all as specified and as directed. Make :Finolex/Supreme/Prince

Supply and fix 110mm bore UPVC (SWR) vent cowl complete all as specified and as directed. Make :Finolex/Supreme/Prince

Supply and fix PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet complete all as specified and as directed.Make :Finolex/Supreme/Prince

Repairs to loose hanging mild steel window/ ventilator shutters not exceeding 1sqm each including repairs to hardwares by welding for smooth functioning of the shutters including making good the welded surfaces to match with the existing window/ ventilator surface complete all as specified and directed. Notes: (i) Windows are to be fixed to the buildings upto 3 stories height. (ii) Hardwares wherever required to be replaced shall be measured and paid separately under respective items of this Schedule at supply only rates.

Note: Schedule shall be executed in high rise buildings of more than 02 floors and upto 03 floors. The contractor shall arrange necessary scaffolding/shoring and other safety measures to be undertaken including necessary insurance for the workers engaged by him during the execution of work.

M/s S N Atiwadkar

M/S MAHADEV M PATIL

M/s. N D KALING

M/s B C CHOUGULE

SAMARTH ASSOCIATES

SAVAN ENTERPRISES

DHANSHRI ENTERPRISES