Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | ₹19.5 L | L1 | Accepted-AOC Lowest Bidder. |
| 2 | L2₹26.6 L+₹7.1 L (36.4%)Rejected-Finance | ₹26.6 L+₹7.1 L (36.4%) | L2 | Rejected-Finance Other than lowest bidder. |
| Sl No | Description | Qty | Unit | s s construction L1 | M/S CHOUDHARY BUILDERS L2 |
|---|---|---|---|---|---|
| 1.00 | Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 Cum of stone chipping , again well rammed (including supply of premixed macadam, binder and chipping etc) depth of potholes exc 30 mm complete all as specified and as directed. | 2 | X Sqm | 2,500 ₹5,000 Lowest | 3,000 ₹6,000 |
| 2.00 | Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Paving Bitumen of Viscosity Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller, complete all as specified and as directed.
Note:-The minimum consolidated thickness will be 30mm. However it may be increased at places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting their rates. | 735 | X Sqm | 2,300 ₹16,90,500 Lowest | 3,200 ₹23,52,000 |
| 3.00 | Premix bituminious macadam consolidated thickness (75mm or less) thick and over with 4% binder content by weight of total mix using VG-30 paving bitumen any penetration laid/rolled to required gradient and camber using power road roller complete all as specified and as directed. | 2 | Cum | 4,800 ₹9,600 Lowest | 7,000 ₹14,000 |
| 4.00 | Marking lines 2.5mm thick, dashes arrows etc of any description n.exc 10cm width/girth on new/old road surface using hot applied thermo plastic road marking paint (Yellow/white/Red) mixed with radium glass beads @ 250 gms/Sqm with automatic machine to provide reflectivity and night vision (approximate temperature being 200° Celsius at the time of laying) including cleaning the surface by removing all dirt, dust & all other foreign matters, demarcation at site and traffic control, complete all as specified and as directed. | 205 | Sqm | 300 ₹61,500 Lowest | 400 ₹82,000 |
| 5.00 | S & F solar road stud having 3 LED of colour red/yellow/blue/green to a side (total 6 nos) housed in a tough pressure die casted aluminium alloy size 125 x 125 mm of height 20mm with built in stem nail 37 x 37 x 55mm long for fixing with epoxy with & including LED solae cells battery and light sensor well protected inside under tough unbreakable polycarbonate sheet roof system workable for 3-4 (nights) after full charge in 8-10 hrs by hammering, incl necessary digging or taking out old/ damage items and making good complete all as specified and as directed. | 20 | Each | 1,200 ₹24,000 Lowest | 1,800 ₹36,000 |
| 6.00 | S&F aluminium body cat eye's dual dircetional reflective cat eye of aluminium casted stud 100mm x 100mm having plastic ABS strip containing 31 mini retroreflective glass beads of colour white/red/yellow side provided with steel zinc pasted nails of dia 12mm and of length 120mm by hammering or epoxy resin incl removal of old unserviceable stud complete all as specified and as directed. | 40 | Each | 300 ₹12,000 Lowest | 400 ₹16,000 |
| 7.00 | S & F high intensity grade shedding retro reflective delinator post 75mm outer dia, heavy duty steel pipe 1.2m long head cap by hydraulic machine design and holdfast welded on delineator post bottom with one coat of red oxide paint and two coats of stove enameled paint by heat process and three Nos reflective bands of white, red & yellow colour and covered by 14 gauge net grill and welded complete all as spd embedded in ground in 30x30x40cm deep pit (incl excavation and removal of soil) filled with PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and upto 30cm high above ground level incl necessary formwork, removal of old unserviceable delinator complete all as specified and as directed. | 32 | Each | 400 ₹12,800 Lowest | 500 ₹16,000 |
| 8.00 | S & F Speed Breaker of required 500 mm x 350 mm of thcikness 75mm size made of rubber to carry load upto 40 Ton fixed with nuts in existing as well as new road complete all as per manufacturer's instruction complete all as specified and as directed. | 30 | RM | 4,000 ₹1,20,000 Lowest | 4,100 ₹1,23,000 |
| 9.00 | S & F ROAD SAFETY CONVEX MIRROR for 800m m dia made up of polycarbonate wide range unbreakable safety convex mirror with mounting/erecting arrangements, weather proof hoods complete and adjustable fixing brackets including excavation/removal for mounting pole and embedded in PCC 1:2:4 type B1 (using 20mm graded aggregate) of size 45x45x60cm complete all as per manufacturer's instruction complete all as specified and as directed. | 5 | Each | 3,500 ₹17,500 Lowest | 3,800 ₹19,000 |
Tender Value
₹24.3 L
EMD Value
₹49,000
Closing Date
13 Mar 2026, 5:00 pmClosed
Col Amit Bhardwaj
HQ CWE Jammu
SPECIAL REPAIR OF ROADS AT RAIPUR LINES AND RAJOURI LINES IN DAMANA MIL STN UNDER GE JAMMU
2026_MES_753495_1
CWE/JP-91/2025-26
Open Tender
Civil Works - Others
Works
180 days
GE Jammu
As Per Tender Documents
9 documents required · 9 mandatory
₹500
Yes
GE Jammu
₹49,000
Yes
30 Mar 2026
20 Feb 2026
16 Mar 2026
20 Feb 2026
13 Mar 2026
6 Mar 2026
20 Feb 2026 - 23 Feb 2026
Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 Cum of stone chipping , again well rammed (including supply of premixed macadam, binder and chipping etc) depth of potholes exc 30 mm complete all as specified and as directed.
Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Paving Bitumen of Viscosity Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller, complete all as specified and as directed. Note:-The minimum consolidated thickness will be 30mm. However it may be increased at places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting their rates.
Premix bituminious macadam consolidated thickness (75mm or less) thick and over with 4% binder content by weight of total mix using VG-30 paving bitumen any penetration laid/rolled to required gradient and camber using power road roller complete all as specified and as directed.
Marking lines 2.5mm thick, dashes arrows etc of any description n.exc 10cm width/girth on new/old road surface using hot applied thermo plastic road marking paint (Yellow/white/Red) mixed with radium glass beads @ 250 gms/Sqm with automatic machine to provide reflectivity and night vision (approximate temperature being 200° Celsius at the time of laying) including cleaning the surface by removing all dirt, dust & all other foreign matters, demarcation at site and traffic control, complete all as specified and as directed.
S & F solar road stud having 3 LED of colour red/yellow/blue/green to a side (total 6 nos) housed in a tough pressure die casted aluminium alloy size 125 x 125 mm of height 20mm with built in stem nail 37 x 37 x 55mm long for fixing with epoxy with & including LED solae cells battery and light sensor well protected inside under tough unbreakable polycarbonate sheet roof system workable for 3-4 (nights) after full charge in 8-10 hrs by hammering, incl necessary digging or taking out old/ damage items and making good complete all as specified and as directed.
S&F aluminium body cat eye's dual dircetional reflective cat eye of aluminium casted stud 100mm x 100mm having plastic ABS strip containing 31 mini retroreflective glass beads of colour white/red/yellow side provided with steel zinc pasted nails of dia 12mm and of length 120mm by hammering or epoxy resin incl removal of old unserviceable stud complete all as specified and as directed.
S & F high intensity grade shedding retro reflective delinator post 75mm outer dia, heavy duty steel pipe 1.2m long head cap by hydraulic machine design and holdfast welded on delineator post bottom with one coat of red oxide paint and two coats of stove enameled paint by heat process and three Nos reflective bands of white, red & yellow colour and covered by 14 gauge net grill and welded complete all as spd embedded in ground in 30x30x40cm deep pit (incl excavation and removal of soil) filled with PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and upto 30cm high above ground level incl necessary formwork, removal of old unserviceable delinator complete all as specified and as directed.
S & F Speed Breaker of required 500 mm x 350 mm of thcikness 75mm size made of rubber to carry load upto 40 Ton fixed with nuts in existing as well as new road complete all as per manufacturer's instruction complete all as specified and as directed.
S & F ROAD SAFETY CONVEX MIRROR for 800m m dia made up of polycarbonate wide range unbreakable safety convex mirror with mounting/erecting arrangements, weather proof hoods complete and adjustable fixing brackets including excavation/removal for mounting pole and embedded in PCC 1:2:4 type B1 (using 20mm graded aggregate) of size 45x45x60cm complete all as per manufacturer's instruction complete all as specified and as directed.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.37 MB
tender91_merged.pdf
Tender Documents • 1.78 MB
BOQ_843965.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .