Estimate for the construction of Distribution system of Kathgarh Distributary No. 1 off taking at RD 4100 m of Kathgarh Rising Main off taking at Burji 38810 Right Side of BDC Main canal Part 1

Amount

MATERIALS

M-1) Aggregates (average rate of all the quarries) Note:- Quarry wise aggregates rates attached at Annexure-I)

((d)) Fine Sand with FM not less than 1.6

CENTRING AND SHUTTERING

(9.14) Shuttering for precast and plain or Reinforced concrete blocks, wall plates, bedplates, shelves etc.

CONCRETE

(10.13) 1:2:4 Cement concrete

(10-10.13-a(ii)) mixing by mechanical means using concrete mixer volumetric type

BRICK WORK

(11.5) First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

PLASTERING & POINTING

(15.7) 12.5 mm thick cement plaster 1:2

STEEL AND IRON WORK

(18.18) Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

WATER SUPPLY

(2) Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

((a)) Earth work upto 1.5 m. Depth for

For Ordinary soil having gravel upto 40%

(15) Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984-1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

(A) H.D.P.E pipe of 10 kg PE-80

(D) H.D.P.E pipe of 4 Kg PE-80

((d)) 90 mm o/d

((i)) 180 mm o/d

((l)) 250 mm o/d

((m)) 280 mm o/d

((n)) 315 mm o/d

((o)) 355 mm o/d

(29) Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

((d)) C.I Single air valve screwed (Size 50mm)

(66) Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

(27) Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).

(A) Class PN-1 as per ISI

(a) 80mm i/d Sluice Valves flanged

(b) 100mm i/d Sluice Valves flanged

(c) 150mm i/d Sluice Valves flanged

(d) 200mm i/d Sluice Valves flanged

(e) 250mm i/d Sluice Valves flanged

(f) 300mm i/d Sluice Valves flanged

(g) 350mm i/d Sluice Valves flanged

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 4 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications (75mm)

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 4 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications (90mm)

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 4 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications (110mm)

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 4 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications (125mm)

Providing, Laying, fixing & jointing of U.P.V.C pipes of superior make @ 4 kgf pressure as per ISI-4985(ISI marked with the prior approval of Engineer in charge) along the trenches and laying the same in trenches to correct alignment and gradient, cutting, jointing and testing complete as per specifications (160mm)

Supply & fixing UPVC Riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (75mm)

Supply & fixing UPVC riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (90mm)

Supply & fixing UPVC Riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (110mm)

Supply & fixing UPVC Riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (125mm)

Supply & fixing UPVC Riser from PVC pipe for release of water at different outlet complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (160mm)

Supply & fixing UPVC Long bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (75mm90°)

Supply & fixing UPVC Long bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (90mm90°)

Supply & fixing UPVC Long bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (110mm90°)

Supply & fixing UPVC Long bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (125mm90°)

Supply & fixing UPVC Long bends of different angle of 6kgf pressure conforming to IS-codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (160mm90°)

Providing & fixing Alpha Valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.(75mm)

Providing & fixing Alpha Valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.(90mm)

Providing & fixing Alpha Valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.(110mm)

Providing & fixing Alpha Valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.(125mm)

Providing & fixing Alpha Valve including carriage, rehandling, loading, unloading, testing, etc. complete in all respect as per PWD specifications or instructions of the engineer in charge.(160mm)

Supply and fixing Flange Tail End Point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge(80mm)

Supply and fixing Flange Tail End Point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge(100mm)

Supply and fixing Flange Tail End Point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge(150mm)

Supply and fixing Flange Tail End Point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge(200mm)

Supply and fixing Flange Tail End Point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge(250mm)

Supply and fixing Flange Tail End Point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge(300mm)

Supply and fixing Flange Tail End Point of 6kgf with M.S. flange including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge(350mm)

Supply & fixing of UPVC Equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.(75x75x75 mm)

Supply & fixing of UPVC Equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge.(90x90x90 mm)

Supply & fixing of UPVC Equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge. (110x110x110 mm)

Supply & fixing of UPVC Equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge. ( 125x125x125 mm)

Supply & fixing of UPVC Equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work. including carriage, rehandling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge. (160x160x160 mm).

Providing & fixing UPVC Reducer/ Increaser of 6Kgf pressure conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (50x80mm)

Providing & fixing UPVC Reducer/ Increaser of 6Kgf pressure conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (110x90mm)

Providing & fixing UPVC Reducer/ Increaser of 6Kgf pressure conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (75x90mm)

Providing & fixing UPVC Reducer/ Increaser of 6Kgf pressure conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge. (125x160mm)

Supply & fixing of service saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge (75 mm x 50 mm)

Supply & fixing of Service Saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge (90 mm x 50 mm)

Supply & fixing of Service Saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge (110 mm x 50 mm)

Supply & fixing of Service Saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge (125 mm x 50 mm)

Supply & fixing of Service Saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge (160 mm x 50 mm)

Supply & fixing of Service Saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge (200 mm x 50 mm)

Supply & fixing of Service Saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge (225 mm x 50 mm)

Supply & fixing of Service Saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge (315 mm x 50 mm)

Supply & fixing of Service Saddle M.S. conforming to code with latest amendments if any at site including carriage, loading, unloading & rehandling complete in all respect as PWD specifications or instructions of the Engineer In Charge (355 mm x 50 mm)

Supplying, fixing and jointing PVC / H.D.P.E pipe's specials complete as desired by Engineer-in-ChargeFor pipe lines laid outside habitation & in the open area/ field 2%. (355 mm o/d )

Supplying, fixing and jointing PVC / H.D.P.E pipe's specials complete as desired by Engineer-in-Charge.For pipe lines laid outside habitation & in the open area/ field 2%. (315 mm o/d )

Supplying, fixing and jointing PVC / H.D.P.E pipe's specials complete as desired by Engineer-in-Charge For pipe lines laid outside habitation & in the open area/ field 2%. (280 mm o/d )

Supplying, fixing and jointing PVC / H.D.P.E pipe's specials complete as desired by Engineer-in-Charge For pipe lines laid outside habitation & in the open area/ field 2%. (250 mm o/d )

Supplying, fixing and jointing PVC / H.D.P.E pipe's specials complete as desired by Engineer-in-Charge For pipe lines laid outside habitation & in the open area/ field 2%. (180 mm o/d )

Supplying, fixing and jointing PVC / H.D.P.E pipe's specials complete as desired by Engineer-in-Charge For pipe lines laid outside habitation & in the open area/ field 2%. (90 mm o/d )

BEETAN ENTERPRISEZ (BID ID -630367)

MITTAL CONSTRUCTION COMPANY (BID ID -630168)

BHUPESH MITTAL CONTRACTOR (BID ID -629708)

SKYLARK INDUSTRIES (BID ID -630369)

TITHARTH CONSTRUCTION PRIVATE LIMITED (BID ID -630342)

ASHWANI KUMAR GOVT. CONTRACTOR (BID ID -630118)

GMSM BUILDCON INDIA PRIVATE LIMITED (BID ID -630139)