J&K

Active

Works

Civil Works

Repair and Renovation of DC residence at Khanabal

Public Works Department

Anantnag, Jammu And Kashmir

Amount: Refer DocsCloses: 22 Oct 20264d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published15 Oct 2026
Closes22 Oct 2026
Bid Opening23 Oct 2026

Tender Value

Refer Docs

EMD Value

₹20,920

Closing Date

22 Oct 2026, 4:00 pm4d left

Tender Inviting Organisation

Name

Er. Mohammad Waseem

Address

Office of the Executive Engineer RnB Ang

Work Description

Repair and Renovation of DC residence at Khanabal (Balance Part)

Tender Information

Tender ID

2026_PWDJK_328350_1

Reference Number

NIT 113 of RnB/Ang/2026-27/8795-8804 Dt 15/10/26

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

15 days

Location

Anantnag

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

3 documents required · 3 mandatory

Fee/PreQual/Technical/Finance

RequiredCopy of Receipt of Tender Fee, EMD, PAN, GST and GSTR-3B latest, Disclosure of bank Ac No linked wit (.pdf)

RequiredScanned Copy of Valid Registration Certificate with Renewal Side (Latest), Regd card, should be Onli (.pdf)

RequiredBill of Quantities (.xls)

Fee & Financial Details

Tender Fee Amount

₹600

Tender Fee Payable To

Centralized Designated Pooling Ac 0470010200000099

EMD Fee Amount

₹20,920

Important Dates

Last Activity

15 Oct 2026

Published

15 Oct 2026

Bid Opening

23 Oct 2026

Download Starts

15 Oct 2026

Download Ends

22 Oct 2026

Submission Starts

15 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (56 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	A1 – Boards & Laminates	-	-	-	-
2	18 mm PRE-LAMINATED HDHMR BOARD – CARCASS Supplying 18 mm thick pre-laminated HDHMR (High Density High Moisture Resistant) board for carcass sides, top, bottom, partitions and shelves; density ≥ 850 kg/m³, formaldehyde emission class E1 or better, internal bond ≥ 0.8 N/mm², screw withdrawal (face) ≥ 1500 N, water absorption (24 h) ≤ 8%; melamine pre-laminated both faces. Measured as net finished panel area (wastage, cutting and handling deemed included in rate). Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.	37.93	Sqm	2,036.96	₹77,261.89
3	18 mm HDHMR BOARD – SHUTTERS & DRAWER FRONTS Supplying 18 mm thick plain HDHMR board for shutters and drawer fronts, density ≥ 850 kg/m³, E1 or better, calibrated thickness tolerance ± 0.2 mm, for hot-press lamination. Measured as net finished shutter area. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.	9.23	Sqm	1,718.68	₹15,863.42
4	8 mm HDHMR BACK PANEL Supplying 8 mm thick pre-laminated HDHMR board for carcass back panels, housed in 8 mm routed groove; density ≥ 850 kg/m³, E1 or better. Measured as net back panel area. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.	12.27	Sqm	827.51	₹10,153.55
5	1.0 mm DECORATIVE HIGH-PRESSURE LAMINATE (HPL) Supplying and hot-pressing 1.0 mm decorative high-pressure laminate conforming to IS 2046 on the outer face of shutters, drawer fronts and exposed panels, with phenol-formaldehyde adhesive; scratch, stain and heat resistant; shade and texture as approved. Measured as net laminated area. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.	10.15	Sqm	954.82	₹9,691.42
6	0.8 mm BALANCING LAMINATE Supplying and hot-pressing 0.8 mm balancing / inner laminate on the inner face of shutters and drawer fronts to prevent warping. Measured as net laminated area. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.	9.23	Sqm	445.58	₹4,112.7
7	2 mm PVC/ABS EDGE BAND – SHUTTERS Supplying and applying 2 mm thick PVC/ABS edge band, colour-matched, on all four edges of shutters, drawer fronts and exposed shelf edges by automatic hot-melt edge-banding machine with end-cutting and radius trimming. Measured in running metres of edge. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.	67.27	Rm	57.29	₹3,853.9
8	0.8 mm PVC EDGE BAND – CARCASS Supplying and applying 0.8–1.0 mm PVC edge band on carcass front edges and shelf edges by hot-melt edge-banding machine. Measured in running metres of edge. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.	77.55	Rm	19.1	₹1,481.21
9	A2 – Hardware	-	-	-	-
10	35 mm CONCEALED SOFT-CLOSE HINGES Supplying and fixing 35 mm cup concealed clip-on hinges, 3-way adjustable, integrated hydraulic soft-close, nickel-plated steel, opening angle ≥ 110°, durability ≥ 50,000 cycles (EN 15570 Level 3), with mounting plates and screws. Minimum 2 nos. per shutter up to 900 mm, 3 nos. up to 1600 mm and 4 nos. above. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.	50	Nos	445.58	₹22,279

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.73 MB

Work Item Documents

BOQ_1111529.xls

BOQ • 0.32 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

A1 – Boards & Laminates

18 mm PRE-LAMINATED HDHMR BOARD – CARCASS Supplying 18 mm thick pre-laminated HDHMR (High Density High Moisture Resistant) board for carcass sides, top, bottom, partitions and shelves; density ≥ 850 kg/m³, formaldehyde emission class E1 or better, internal bond ≥ 0.8 N/mm², screw withdrawal (face) ≥ 1500 N, water absorption (24 h) ≤ 8%; melamine pre-laminated both faces. Measured as net finished panel area (wastage, cutting and handling deemed included in rate). Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.

37.93

Sqm

2,036.96

₹77,261.89

18 mm HDHMR BOARD – SHUTTERS & DRAWER FRONTS Supplying 18 mm thick plain HDHMR board for shutters and drawer fronts, density ≥ 850 kg/m³, E1 or better, calibrated thickness tolerance ± 0.2 mm, for hot-press lamination. Measured as net finished shutter area. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.

9.23

Sqm

1,718.68

₹15,863.42

8 mm HDHMR BACK PANEL Supplying 8 mm thick pre-laminated HDHMR board for carcass back panels, housed in 8 mm routed groove; density ≥ 850 kg/m³, E1 or better. Measured as net back panel area. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.

12.27

Sqm

827.51

₹10,153.55

1.0 mm DECORATIVE HIGH-PRESSURE LAMINATE (HPL) Supplying and hot-pressing 1.0 mm decorative high-pressure laminate conforming to IS 2046 on the outer face of shutters, drawer fronts and exposed panels, with phenol-formaldehyde adhesive; scratch, stain and heat resistant; shade and texture as approved. Measured as net laminated area. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.

10.15

Sqm

954.82

₹9,691.42

0.8 mm BALANCING LAMINATE Supplying and hot-pressing 0.8 mm balancing / inner laminate on the inner face of shutters and drawer fronts to prevent warping. Measured as net laminated area. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.

9.23

Sqm

445.58

₹4,112.7

2 mm PVC/ABS EDGE BAND – SHUTTERS Supplying and applying 2 mm thick PVC/ABS edge band, colour-matched, on all four edges of shutters, drawer fronts and exposed shelf edges by automatic hot-melt edge-banding machine with end-cutting and radius trimming. Measured in running metres of edge. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.

67.27

57.29

₹3,853.9

0.8 mm PVC EDGE BAND – CARCASS Supplying and applying 0.8–1.0 mm PVC edge band on carcass front edges and shelf edges by hot-melt edge-banding machine. Measured in running metres of edge. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.

77.55

19.1

₹1,481.21

A2 – Hardware

35 mm CONCEALED SOFT-CLOSE HINGES Supplying and fixing 35 mm cup concealed clip-on hinges, 3-way adjustable, integrated hydraulic soft-close, nickel-plated steel, opening angle ≥ 110°, durability ≥ 50,000 cycles (EN 15570 Level 3), with mounting plates and screws. Minimum 2 nos. per shutter up to 900 mm, 3 nos. up to 1600 mm and 4 nos. above. Quantity as per measurement sheet. All complete as per specifications and directions of the Engineer-in-Charge.

Nos

445.58

₹22,279