63/HDA/EC OF 2019 2020(3rd call)

Items

Earthwork in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 mtr. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. Depth of excavation not exceeding 1500 mm. (a)Depth of excavation for additional depth beyond 1500 mm and upto 3000 mm but not requiring shoring.

Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity).

Hire and labour charges for shoring work (including necessary close plank walling, framing, Eucalyptus/Jhou bulla piling, strutting etc) complete as per direction of the Engineer-incharge for foundation excavation (vertical surface are in contact with supported earth is to be measured.) (This item should be executed on specific direction of the Enginner in charge). Depth upto 1.5 m. (a)For additional depth beyond 1.5 m. and upto 3.00 m

Supplying and laying Polythene Sheet (150 gm / sqm) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.

Cement concrete with graded stone ballast (40 mm size excluding shuttering) In ground floor (A) [Pakur Variety]. 1:3:6 proportion.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work

Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, submission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation. [using concrete mixture] (a) M 25 Grade Pakur Variety. In Foundation

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge annealed wire / welded for pile cage at every intersection, complete as per drawing and direction. Tor steel/Mild Steel SAIL/TATA/RINL In Foundation

Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth.

Brick work with 1st class bricks in cement mortar (1:6) (a) In superstructure, ground floor.

40 mm. thick damp proof course with cement concrete (1:1.5:3) (with graded stone chips 20 mm nominal size) with water proofing compound of approved brand @ 0.2% weight of cement including cost of materials over two coats of non toxic acrylic polymer modified cementitious waterproofing slurry coat complete [cost of water proofing compound and non toxic paint to be paid seperately) for underground water retaining structures.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (i) With 1:6 cement mortar (c) 15 mm thick plaster

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary. (ii) With 1:4 cement mortar (c) 10 mm thick plaster

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary. (i) With 1:6 cement mortar (b) 20 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (iii) 35 mm. thick

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (a) One Coat ii) Solvent based interior grade Acrylic Primer

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty. (Two coats) ii) Luxury Quality

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.(Two Coat) c) Super Protective 100% Acrylic Emulsion.

Supplying, fitting & fixing UPVC pipes A Type and fittings conforming to IS:13592- 1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete 110mm dia pipes

a)UPVC Fittings: Bend

b)UPVC Fittings: Shoe

supply & delivery of submersible pumping machinery directly coupled with wet winding type submersible Motor having following specification Discharge -10 m3 / hour Head -45 mtr. Impeller-SS /GM/Noryl Shaft-SS Outlet- 50 mm dia Motor single phase 220 Volt+5% wet winding type submersible motor Mode of startng -DOI Make-KSB / Pluga / Texmo / BG/ Kirlosker / Any approved make N.B. - Majufacturer test certificate along with curve shart should be submitted at the time of delivery.

Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.) PVC Pipes (i) 50mm dia

Supplying, fitting and fixing in position R.C.C. Manhole/ pit cover of approved make with rim of approved make (Heavy type) (ii) 560 mm dia.

Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc.

Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (e) Sal : Malayasian

Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor. (A) Shutter with 25mm thick planks, 19mm thick battens. (ii) Sal : Malayasian

Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (b) 40mm X 6mm, 200mm Length

Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. (vi) 100mm. X 50mm. X 1.25mm

Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm long x 10mm dia. bolt.

Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. (iv) 300mm x 19mm dia. bolt.

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod) (vii) 150 mm grip x 12 mm dia rod.

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : a) On timber or plastered surface : iv) Two coats (with any shade except white)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : b) On steel or other metal surface : (iv) Two coats (with any shade except white)

SITC of Jockey Pump, 200LPM, Capacity 70 Mtr Head, complete with TEFC motor, base frame, coupling guard and cushyfoot.

SITC of Main Fire Pump,1650LPM, Capacity 70 Mtr Head, complete with TEFC motor, base frame, coupling guard and cushyfoot.

SITC of Diesel Engine driven stand by Fire Pump,1650LPM, Capacity 70 Mtr Head, complete with TEFC motor, base frame, coupling guard and cushyfoot.

SITC of composit Control Panel for Manual & Auto operation of the above pump sets

SITC of Cabling & earthing inside pump house from panel to motors, engine, pressure switches

SITC of CI butterfly valve with counter flange & nut bolts a) 150mm dia

b) 50mm dia

SITC of CI Non return Valve with complete including matching flanges, nuts & bolts a) 150mm dia

b) 50mm dia

SITC of Foot Valve with flanges, nuts and bolts, gasket etc a) 150mm dia

b) 80 mm dia

SITC of INDFOSS make pressure switches for cut – out and cut in pressure with cock & ball valve

SITC of 100 mm dia dial type pressure gauge complete with ball valve and cock

SITC of MS Black steel pipeMedium class conforming to IS : 1239/3589 including all fittings & anticorrosive treatment with paint for surface piping & wrapping tape for under ground pipe of the following sizes a) 150mm dia

b) 100 mm dia

c) 80mm dia

d) 50mm dia

e)25 mm dia

SITC of S.S. oblique type hydrant / landing valve with 63 mm outlet stainless steel instantaneous female coupling with rubber cap and chain conforming to IS ; 5290 including matching flange, gasket, nuts and bolts complete.

SITC of Hose reel drum of swinging type complete with 30mtrs long 20nb tube with shut off nozzle complete

SITC of M.S. hose box with lockable arrangements to accommodate 1 RRL hose of 15 m length and one branch pipe

SITC of 63 mm dia rubberized reinforced rubber line hose pipe in 15 m length conforming to IS : 636 Type A ISI marked with Stainless steel male and female instantaneous coupling conforming to IS 903

SITC of S.S. branch pipe with 20 mm nozzle conforming to IS 903 complete.

SITC of 3way F.B. Collecting head

SITC of Air Release Valve -- 20mm size

SITC of 25mm size ball valve (S.S.)

SITC of 15mm gate valve (S.S.)

SITC of MS Black steel pipe Medium class conforming to IS : 1239/3589 including all fittings & supports and painting on outer surface of pipe of the following sizes. a) 80 mm dia

b) 50 mm dia

c) 25 mm dia

SITC of quartzoid bulb sprinkler 68 C along with necessary attachment. Pendant Type

SITC of Installation Control Valve with water monitor gaunge & other accessories as required 80 mm dia

SITC of Fire Alarm panel Single loop, intelligent analogue panel

SITC of intelligent type smoke detector

SITC of intelligent type heat detector

SITC of Fault Isolator Module

SITC of Electronic Hooter-cum Sounder

SITC of intelligent type Manual Call Point

SITC of Responce Indicator

SITC of Beam Detector

SITC of FDA panel for operation of Beam Detectors

SITC of PA panel with one way addressable arrangement by microphone

SITC of 2core, 1.5 sq. mm.flexiable copper wire

SITC of PVC rigid Conduit including providing all accessories complete as required.

SITC of ABC dry powder type fire extinguishers Capacity 6kg. ISI marked

SITC of Co2 type fire extinguishers Capacity 4.5kg. ISI marked

SITC of mechanical foam type fire extinguishers Capacity 9 liters ISI marked

SITC of water Co2 type extinguisher Capacity 9 liters ISI marked.