REPAIR / MAINT OF BOUNDARY WALL, GATE, FENCING , DRAINS , PATH AND OTHER ALLIED SERVICES IN ZONE-III UNDER AGE B/R-II OF GE (NORTH) MEERUT CANTT

Amount

Surface dressing of ground in soft/loose soil not exceeding 15 cement mortar deep and getting out, site clearance including clearing away all grass vegetation, saplings,shrubs, brushwood, under growth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of outside the periphery of defence land. Roots of trees and saplings shall be removed as described under filling of trees root space and hollow filled up with earth including levelling and ramming, complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section embedded in concrete and brick work, including taking out embedded portion and making good to disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.50 cum, in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

M&L for providing plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete for posts/pillars etc complete all as specified and directed.

S&F mild steel ( angle ) posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting, including embeding in concrete and screwing etc conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F mild steel flat iron for securing chain link fencing, drilled and countersunk for balusters running bars, wind ties for roof including drilling holes, bolting and riveting etc and similar work conforming to grade Fe-290 Gde E-165, complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 11 to 15 mm dia of neck exc 5cement mortar but n.exc 10 cm long, complete all as specified and directed.

Supply only chain link security fencing with galvanized steel wire hot dipped (IS : 2721) of 3.8 mm dia and mesh size 50mmx50mm tying on mild steel angle or RCC posts fitted with screws, nut & bolts straining bolts, etc. including provision of binding wire, complete all as specified and directed. (Note:- Mild steel round bars and nut, bolts/Straining bolts etc shall be measured & paid separately under respective items) complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire, complete all as specified and directed. (Note:- Mild steel round bars and nut, bolts/Straining bolts etc shall be measured & paid separately under respective items) complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending etc conforming to FE-410-W grade E-250 or 165, complete all as specified and directed.

S&F in repair Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surfaces of any description n.exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for preparing surfaces of steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint to ends of posts, area tarred exc 0.10 Sqm but n.exc 0.50 Sqm each, complete all as specified and directed.

Removing excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc, complete all as specified and as directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with sub class'B' bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

-ditto- all as above but except brick ( sub class 'B' bricks or fly ash bricks which is retrieved from demolition ) complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

-ditto- all as above but except brick ( sub class 'B' bricks or fly ash bricks which is retrieved from demolition ) half brick thick complete all as specified and directed.

M&L for providing PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping complete all as specified and directed.

Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified.

M&L for 15 mm thick rendering in ready mixed plaster in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed. ( Make ultatech, Birla Airocon or equivalent as approved by GE) complete all as specified and directed. Note : 100% quantity of ready mixed plaster bag deposit to Engr in Charge within 15 day of acceptance of contract.

M&L for 15 mm thick rendering in ready mixed plaster on other than fair faces of brick work or concrete surfaces, finished in cement mortar 1:4 even and fair complete all as specified and directed. ( Make ultatech, Birla Airocon or equivalent as approved by GE) complete all as specified and directed. Note : 100% quantity of ready mixed plaster bag deposit to Engr in Charge within 15 day of acceptance of contract.

M&L for preparing newly plastered surfaces and applying two coat of cement base paint over one coat of alkali resistant primer, complete all as specified and directed.

M&L for preparing old plastered surfaces and applying one coat of cement base paint, complete all as specified and directed.

M&L for preparing newly / untreated plastered surfaces and applying two coat of exterior emulsion weather proof paint over one coat of alkali resistant primer, complete all as specified and directed.

M&L for preparing old surfaces of wall and applying one coat of exterior emulsion weather proof paint , complete all as specified and directed.

M&L for preparing newly plastered surfaces and applying three coats of white / colour wash, complete all as specified and directed.

M&L for preparing old surfaces of wall and applying one coat of white / colour wash, complete all as specified and directed.

Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for and dispose debris and rubbish to a distance n exc 100 m as directed by the Engr in Charge. complete all as specified and directed.

M&L for providing plain cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete for posts,pillars and footing etc complete all as specified and directed.

Use & waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finish surfaces, complete all as spd and directed.

Use & waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20 cm wide complete all as specified and directed. (NOTE :- Where RCC/PCC band in walls, spanning and opening, the formwork soffit only shall be paid for under item for formwork to sides of concrete foundation footing bases of column raft and raft beam sides and soffits (if any) of and similar work for flat rough finish surfaces) complete all as specified and directed.

Use & waste of form work to sides of pillars, posts, struts, piers, columns and stanchions, flat, for rough finish surfaces complete all as specified and directed.

S&F TMT reinforcement bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT reinforcement bars 5 mm dia and over upto including 10 mm dia as in stirupps and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for design mix RCC M-25 concrete as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for design mix RCC M-25 concrete as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for design mix RCC M-25 concrete as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for broken glass coping on top of walls in cement mortar 1:3, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165, complete all as specified and directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering), including running rails and guides or hanging, also fastening and fixing complete (Fe-410-W(Gde-E-250) quality-B) complete all as specifeid and directed

Demolition of cement concrete (unreinforced) in ground floors and paving's not exceeding 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for laying 75mm thick PCC 1:2:4 Type B1 (using 20 mm graded crushed stone aggregate) as in sub base or floor complete all as specified and directed

M&L Hardcore of gauge exceeding 63mm but not exceeding. 100 mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

M&L in repair 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 50mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

S & F in repair factory made precast cement concrete type B0, 1:2:4 ( 12.50 mm graded stone aggregate) louvres and jallies, 50 mm thick (measured solid), including all mouldings but excluding frame work, set in cement mortar 1:4 complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for Screed bed or bedding layer of mortar 15 mm thick with cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M& L for exterior grade, coloured cement concrete designer chequered tiles of size 300 mm x 300 mm x 25 mm thick, set,jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour/ matrix of tiles as in floor ect. complete all as specified and directed.

M& L for exterior grade, coloured vitrified ceramic designer floor tiles for parking area, paved area, size 300 mm x 300 mm x 10 mm thick, set,jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour/ matrix of tiles as in floor ect. complete all as specified and directed.

M& L for exterior grade, coloured ceramic designer wall tiles for external wall surfaces, size 450 mm x 350 mm x 7 mm thick or 350 mm x 250 mm x 7 mm thick, set,jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour/ matrix of tiles, over and including 10 mm thick cement plaster with cement mortar 1:4 complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors,aprons etc, laid, bedded or pointed any mortar complete all as specified and directed.

M & L for 18-20 mm thick Granite perfect black or colour approved by GE (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including point?ing in white cement (1:2) us?ing marble dust with admix?ture of pigment to match with shade of granite complete all as specified and directed

veer enterprises

Arun Construction Co.

M/S AMAR ELEKTRO CENTRE