84854 PROVN OF INSTALLATION OF CHIMNEY IN THE MAIN KITCHEN AND PROVN OF 06 X AIR CONDITIONERS FOR BANQUEST HALL AND BAR TO BLDG NO. 10A AT SOUTHERN COMMAND OFFICERS MESS IN THE AREA OF AGE E/M UNDER GE (NORTH) PUNE

Amount

(NOTE FOR ALL ITEMS OF THIS BOQ : Sample / make is to be approved by GE before procurement by the contractor.) Supply, fix, testing and commissioning Centrifugal Exhaust Blower of radial flow type of capacity 5 H.P, 3 phase ,50 Hz 440 V ,2800-3000 R.P.M,7500 CFM ( Cubic Feet Per Minute) with sound insulation, made of high quality, corrosion resistant material like MS/Stainless steel to withstand humid and greasy conditions, fan blades made of durable material such as aluminium/Galvanised steel and blades be backward curved, Pressure 400mm WG (Milimeters of water gauge) and variable speed control, to adjust with cooking intensity, to overcome duct resistance, filters and bends in the system, noise range between 50-70 db, must allow to adjust the blower speed based kitchen activity levels and exhaust requirements with 3-Phase Foot Mounted a complete all as specified and as directed by Engr-in-Charge.

Material, Labour and testing for stainless steel 202, 1mm 20 Gauge Box Type Single Island Type Hood with 100 CFM per 12 inches of stove width and installing above 24-30 inches above gas/electric cooktops and ensuring that the hood to be centered above cooking area to maximize airflow and capture all smoke and steam, with necessary hanging arrangements and adjustable mounting brackets to accomodate ceiling heights and ensure proper clearance above the cooktops including Fabrication Work For Hood Installation Without Oil Filters of Size:-120”X46”X18”. Making And Fitting On Site complete all as specified and as directed by Engr-in-Charge.

M &L for stainless steel 202 0.8 mm, 22 Gauge Box Type Mesh Oil Filters to filter impurities such as dirt water and sludge from the oil and other fules used in combustion system feeding a chimney to ensure efficient combustion with flow meters to monitor flow rate of oil and identify when the filters are clogged, automatic cleaning mechanisms for filters and digital monitoring sensors to detect pressure and made of corrosion resistant metals such Stainless steel with sturdy, durable box type construction to withstand high temperatures & oil pressure and sealing mtrl such as gasket seals made of high temp resistance mtrl such as silicone or EPDM to prevent oil leakage, filter media made of stainless steel mesh/sintered metal/fiberglass and filters should have micron rating of 5 to 10 microns as per manufacturers recommendation and filteration capacity to match with the flow rate of 3000 CFM with that oil burner or heatin system, also have bypass valve to prevent cloggging or pressure buildup if the filter becomes too dirty, complying to ISO-16889 and of Size:-500mm X 500mm X 50mm Making And Fitting On Site complete all as specified and as directed by Engr-in-Charge.

M &L for Galvanized steel 0.6 mm 24 Gauge 80 G.S.M (JSW) durable & resistant to rusting,able to withstand temperature range 300º F to 1000º F Make Sheet Square Ducting, Making and Fitting. Including Elbow, Off-set, Tapper Piece. For 5 H.P Blower Line On Site including scaffolding Fabrication Work for And Ducting Installation complete all as specified and as directed by Engr-in-Charge

M & L for Mild Steel Platform construction including scaffolding for fabrication Type Structure For Blower Size :- 7 Feet X 4 Feet. M.S Angle:-35mm X 35mm X 5mm, Square Tube:-50mm X 50mm, Plate :- 3 mm thick X 5 Feet long X 4 Feet width, complete all as specified and as directed by Engr-in-Charge

Supply and fix Anti Vibration Pad. (To Reduce Machine Vibration Fitting On Machine In-between Platform) all as specified and as directed by Engr-in-Charge.

M & L Canvas Connection (To Reduce Ducting Vibration Fitting On Machine In-Between Ducting) all as specified and as directed by Engr-in-Charge.

M & L for hardware Material such as Nut Bolt, Anchor Fastener, Rubber Packing including Fabrication all as specified and as directed by Engr-in-Charge.

M & L for Aluminium Fresh Air Damper With Double Deflection Grill Size:-150mm X 600mm X 50mm all as specified and as directed by Engr-in-Charge.

M & L for Breaking wall for passing duct for chimney in 30cm thick wall using pnuematic hammer and making sure no damage to structure including making good to the disturbed surface including necessary permission before commencing the work complete all as specified and as directed by Engr-in-Charge.

Supply and Fix DOL Starter for 5 HP exhaust motor fully automatic suitable for 415 V AC, 3 phase 50 Hz complete all as specified and as directed by Engr-in-Charge.

Supply and lowering in repairs submersible flat Three Core PVC Insulated & PVC Sheathed Industrial Cable copper conductor mutistraned cable of size 3 core x 6 Sq mm for Submersible Pump Motor with necessary connections from Motor to starter complete with nessesary thimbles etc. complete all as specified and as directed.

Supply, Installation, Testing and Commissioning of Inverter type wall mounting air cooled split type unit air conditioner electric driven single phase indoor unit and outdoor unit with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality cutting, brazing and connecting the copper pipe of size 1/2 inch and 1/4 inch size of pipe and making holes as for passing of copper pipes and electric cables and pressure testing with nitrogen and freon gas vacumising the system and charging the Non CFC refrigerent and testing the complete including core cutting with core cutting machine (24") system for smooth functioning of split AC up to satisfaction, above 4 star rating, confirming to IS-1391 Para II 1992 herimatically sealed air compressor working with Non CFC refrigerent suitable for wall mounting 4500 K cal/ hrs 1.5 Ton complete all as specified and directed. (Note : Additional quantity of PVC flexible pipe, copper Tubing 1/2 " and 1/4" if any required (other than reveived by default with AC) shall be measured and paid under respective item of this BOQ.)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with multistranded copper conductor of size 06 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty conduit ISI marked and its accessories including one run of PVC insulated 06 Sqmm (nominal area) FRLS multistranded copper conductor cable as earth wire complete all as specified and as directed.

S &F Voltage Stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230V with accuracy of ± 2.5% and of capacity 5.0 KVA complete all as specified and as directed.

Supply and fix MCB Protected Socket with sheet steel enclosure SRCD(socket residual current device) single pole and neutral enclosure with a two pin and earth plug and socket complete with 20 Amps MCB single pole complete all as specified and as directed.

S & F for copper tubing of size 1/4” for discharge line any make of split AC of capacity 1.5 ton with insulation sheet of pipe tube type insulation complete all as specified and directed.

S & F for copper tubes of size 1/2” for Suction line of split AC of capacity 1.5 ton including insulation sheet of pipe tube type insulation complete all as specified and directed.

S & F for flexible PVC pipe 15mm dia heavy duty from outdoor unit to indoor unit for drain of water complete all as specified and directed.

S & F for new powder coated Mild Steel fabricated stand suitable for outdoor unit of Tower AC of 1.5 TR to install outdoor unit on wall/ floor as required on site with legs and bracing complete all as specified and directed.

KSONS (BID ID -3178777)

M/s Green Leaf Electricals (BID ID -3183668)

K.K.Enterprises (BID ID -3184461)

SBS Enterprises (BID ID -3179074)

M/s.BAJRANG CONSTRUCTION (BID ID -3178380)

Goodluck Enterprises (BID ID -3184385)

T.H.ASSOCIATES (BID ID -3181770)