Karnataka

AOC

Works

Roads

Construction of road SH-61 Managuli-Bichhali From Km 208.00 to Km 213.00(Haravi to Neermanvi) in Manvi Constituency

Public Works Department

PWD Division Office Raichuru | Karnataka

Amount: ₹1.3 CrCloses: 6 Feb 2026Closed

Timeline

Published28 Jan 2026
Closed6 Feb 2026
Awarded—

Bids

1 Bid6 Feb 2026

#	Company	Amount	Status
1	KSA CONSTRUCTIONS AND INFRASTRUCTURES ₹1.3 Craccepted-aoc	₹1.3 Cr	accepted-aoc

Tender Value

₹1.3 Cr

EMD Value

₹2 L

Closing Date

6 Feb 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

H Basavaraj TA

Office Number

Work Description

Construction of road SH-61 Managuli-Bichhali From Km 208.00 to Km 213.00(Haravi to Neermanvi) in Manvi Constituency

Tender Information

Tender ID

PWD/2025-26/RD/WORK_INDENT29213

Reference Number

PWD/2025-26/RD/WORK_INDENT29213

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Raichuru

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredPWD Registration Certificate

RequiredSimilar nature of single work done certificate with indent number

RequiredQty wise work done Certificate with indent number

RequiredLine of credit / Bankers certificate

RequiredAssesed tender capacity / Bid capacity

RequiredAny other relevant documents.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27.7.2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund.

The Item Rate quoted shall include the Royalty Charges on construction materials and other taxes as per prevailing Government Orders.

Conditional tenders will not be accepted.

The Tenderer shall obtain the workdone certificate in the prescribed format from the Competent Authority not below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Bid. The Original Certificate/Certificates shall be produced at the time of opening of technical Bids for physical verification.

The Employer reserves the right to Reject any or all Tenders without assigning any reason.

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2 : Instructions to Tenderers (ITT), will only be considered for evaluation.

Bidders are advised to note that, 18% GST will be not added in the amount put to tender.

GST will be paid over and above the contract amount.

The bidder should mention the UDIN No on the turnover certificate, failing which bid is rejected.

If the bidder uploaded the false document while participating in the tender, the bidder will be responsible and action will be initiated as per the tender clause.

The Bidder will be qualified only if their available tender capacity is more than the total tender value of this work.

The work should be completed within 6 (Six) Months ( including monsoon).

The KPWD Code, KTTP Act/Rules ,Delegation of Powers and other Government Orders issued by the Government from time to time will apply.

All the specifications in the commercial bid format please be read as with all leads and lifts etc., complete as per specification and as directed by the engineer-in-charge.

Defect liability period is One (1) year from the date of actual completion of the work.

Bidder has to upload the workdone certificates with work indent number.

Evaluation of similar nature of workdone amount Shall be considered as excluding GST.

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Past Experience

3.2(b). To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (between 2020-21 to 2024-25) , (b) Satisfactory completion as a prime contractor for at least one similar nature of work to an extent of 50% of the cost of the work. Rs. 63.02 Lakhs.

Work Done Certificate

3.2 (c)To qualify for award of this contract each Tenderer in his name should have in the last five years i.e. (between 2020-21 to 2024-25 (c) Executed in any one year (for a continuous period of 12 months) the minimum quantities of work: (usually 80% of annual rate or requirement) (A) Earthwork excavation /Subgrade/Embankment :1730.00 cum (B) GSB : 489.00 Cum (C)WMM/WBM : 622.00 Cum (D) BM / SDBC : 311.00 Cum (E) PCC / RCC : 219.00 Cum (F) Steel .Reinforcement : 6.25 Ton.

Others -- Quantitywise workdone certificate

Capabilities of Vendor

List of existing commitments and ongoing works

Others -- List of existing commitments and ongoing works

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Others -- key technical and management personnel

Financial Status

3.3 (b). Liquid assets and or availability of credit facilities of not less than Rs. 63.02 Lakhs. (Credit lines / Letter of credit / Certificates from Banks) for meeting the fund requirement etc. (usually the equivalent of the estimate cash flow for three months in peak construction period.

Line of Credit

Total value of civl engineering works executed and payments received in the last five years (year-wise).

ITR Filed Copy (Mentioning PAN)

3.2 (a) To qualify for award of this contract, each Tenderer in his name should have in the last five years i.e. (between 2020-21 to 2024-25) (a) Achieved in at least two financial years a minimum financial turnover (In all classes of Civil Engineering Construction works only) (not less than 2 times the estimated annual payment under this contract) of Rs 252.08 Lakhs.

Audited CA Certificate of Annual Turnover

Others

TENDERER MUST UPLOAD ELIGIBLE PWD REGISTRATION CERTIFICATE.

Others -- PWD Registration certificate

Tenderer place of Business

Others -- Tenderer place of business.

Assessed Tender Capacityshall be more than the Tendered Amount

Others -- Assessed Tender Capacityshall be more than the Tendered Amount

List of works for which tenders already submitted

Others -- List of works for which tenders already submitted

Banker Details for reference

Others -- Banker Details for reference

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Others -- auditors reports for the last five years.

List of Financial Resources with Certificates

Others -- List of Financial Resources with Certificates

Work Locations

Fee & Financial Details

Tender Fee Amount

₹3,160

EMD Fee Amount

₹2 L

Important Dates

Last Activity

6 Feb 2026

Published

28 Jan 2026

Bid Opening

7 Feb 2026

Download Ends

31 Jan 2026

Pre-Bid Meeting

30 Jan 2026

BOQ Preview

•

Construction of road SH-61 Managuli-Bichhali From Km 208.00 to Km 213.00(Haravi to Neermanvi) in Manvi Constituency

•

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacte...

•

Construction of Subgrade and Earthen Shoulders .Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads,transporting to site, spreading,...

•

Granular Sub-Base.A Plant Mix Method.Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in ...

•

Wet Mix Macadam (Plant Mix Method). Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical...

•

Prime Coat over WMM/WBM. A (i) Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rat...

•

Tack coat on Bituminous surface Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned w...

•

Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported t...

•

Semi Dense Bituminous Concrete .Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bitumin...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous SurfaceProviding and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorisi...

•

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Formwork for Foundation, Sub structure of Cross drainages 5 percent

•

Add 35% Additionalities for formwork, centring, & scaffolding for side walls

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Open Conduit System Supplying heavy gauge PVC conduit pipe 40mm dia 2.5mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plug...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (Virgin) PVC insulation and she...

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F. screws.

•

Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter.

•

Supplying, fixing and wiring electronic 10 to 40 Amps three phase 4 wire class-1 Accuracy Energy Meter.

•

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40...

•

Fabricating supplying and mounting MS box made out 14SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped ...

•

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.

•

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 50Amps ...

•

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/ panel board. 63Amps 4 pole

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sh...

•

Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/ Bends / End-caps of same materials in existing trench as per IS 14930 part -II sui...

•

Aluminium End Terminal (Lug) 16sqmm

•

Aluminium End Terminal (Lug) 25sqmm

•

Brass Cable Gland 25mm

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, ...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth

•

upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr,

•

Supplying and Displaying necessary Danger Boards a...

•

Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness includingdepositing of the surplus earth with a lead o...

•

Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches Tar Road., 4x4x1x.50=8 CFT

•

Fabricating, supplying and erection of …Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, inclu...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification.For Foundations of Bridges , 20.47/Pole x 17 = 347.99 say 0.35 MT

•

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.

•

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. - Single Arm Bracket with 2000mm Stan...

•

200006-PSC POLE 9.0M LONG 200KG WL

•

27901205-11KV Horizontal cross arm wit

•

2811101-Guy with complete set

•

283005-11 kv pin insulator(shell onl)

•

283040-disc insulators 45kn

•

283055-11kv pin insulator (G.I pin)

•

284108-rabbit ACSR conductor

•

278811-11kv danger board

•

278911-barbed wire (10mts)

•

281008-8 SWG G.I wire

•

281110-7/10 SWG guy wire

•

2811101-guy with complete set

•

2811103-earthing materials type for gr

•

283320-silcon rubber composite insula

•

285555-95 sq.mm (P.G.clamps rabbit)

•

82193001-AL lead wire 94 sqmm

•

200006-PS pole-9.0m long,200kg WL

•

27901203-4 pin cross arm with pole clam

•

2811101-guy with complete set

•

283003-1.1Kv PIN INSULATOR

•

283053-1.1KV pin insulator

•

283158-no.8 strain insulator

•

284108-rabbit ACSR conductor

•

LABOUR COST FOR ELECTRICAL POLES & TCs SHIFTING.

•

erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8mtr depth

•

loading & unloading of 9mtr RCC/PSC poles

•

Realeasing of ordinary soil

•

Fixing of V-Shape/Horizontal cross arm including single top support Braces and Insulators fixing.

•

releasing of fixing of vishape/horizantal cross arm including single top support braces and insulators fixing

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

For Rabbit ACSR

•

Releasing and restringing of/tightening of loose spans,binding,straightening od rabbit ACSR inclined pole etc

•

Erection of 63KVA Transformer complete set

•

Releasing of 1063KVA Transformer complete set

•

fixing danger board

•

G.I barbed wire (12mtr/1kg)

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

Providing GI Pipe Earthing for lightning arresters Transformer Neutral and Transformer Metal parts (Excluding digging of pits)

•

wiring of one circuit of LT wiring kit for 25/63/100 kva DTC to the existing LT protection kit/distribution box via metering box

•

erection of RCC/PSC poles 9 to 10mtr long but in a pit of 1.8mtr depth

•

loading and unloading of 9mtr RCC/PSC poles

•

Releasing of ordinary soil

•

fixing of 4 pin cross arm with insulator and bracesc fixing

•

Releasing of fixing of 4 pin cross arm with insulator and bracess fixing

•

a) Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

For rabbit ACSR

•

Releasing and restringing of/tightening of loose spans,binding,straightening od rabbit ACSR inclined pole etc

•

cuttings of trees

•

Cutting of Trees, excluding removal of stumps and roots of trees - Girth above 1800 mm. Ref to MoRT&H : IRC - 201

•

Removal of stumps and roots including backfilling with suitable material to required compaction - Girth above 1800 mm. Ref to MoRT&H : IRC - 201

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

kw-4 wi 29213.doc

Tender Document • 6.39 MB

formats-1-10 new 25-26.xls

Others - Format 1 to 10 • 0.09 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

KSA CONSTRUCTIONS AND INFRASTRUCTURES

₹1.3 Craccepted-aoc