Construction of 01 no. 33 KV line bay at Grid station Bishnah for newly constructed 10 MVA 33/11 KV receiving station at Industrial Estate Rakh Rara, Ramgarh, Samba. of U.T of J and K

supply of 33KV VCB (36 KV, 2500 Amps of 3 phase, 50 c/s and 25KA for 3 sec) outdoor type with all accessories and auxiliaries

erection of 33KV VCB (36 KV, 2500 Amps of 3 phase, 50 c/s and 25KA for 3 sec) outdoor type with all accessories and auxiliaries

supply of 36kV, 50c/s , 2500 Amp, 25kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators without Earthing Blades

erection of 36kV, 50c/s , 2500 Amp, 25kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators without Earthing Blades

supply of 36kV, 50c/s , 2500 Amp, 25kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators with One Earthing Blades

erection of 36kV, 50c/s , 2500 Amp, 25kA for one second, Ac motor operated horizontal double break, outdoor type 3 pole Isolators with One Earthing Blades

supply of Single Phase 36KV 50 c/s, outdoor metal oxide gapless type, 120KV (rms) Surge Arrestor including Surge counters/monitors, insulating base all associated accessories, auxiliaries.

erection of Single Phase 36KV 50 c/s, outdoor metal oxide gapless type, 120KV (rms) Surge Arrestor including Surge counters/monitors, insulating base all associated accessories, auxiliaries.

supply of Single phase, 50 c/s 36KV Current Transformers (1200-600-300 /1-1-1 A or as per site specifications) , 31.5KA for one second, rated dynamic current 31.5KA(peak), Class A insulation, Burden 20 VA

erection of Single phase, 50 c/s 36KV Current Transformers (1200-600-300 /1-1-1 A or as per site specifications) , 31.5KA for one second, rated dynamic current 31.5KA(peak), Class A insulation, Burden 20 VA

supply of 33KV Post Insulators Solid Core Type, Power Frequency Withstand Voltage 95KVP Dry lightning impulse withstand voltage ± 170 (KVP)

erection of 33KV Post Insulators Solid Core Type, Power Frequency Withstand Voltage 95KVP Dry lightning impulse withstand voltage ± 170 (KVP)

supply of 33KV Control and Relay Panel for Line/Feeder completely wired including Substation automation supporting IEDs/numerical relays

erection of 33KV Control and Relay Panel for Line/Feeder completely wired including Substation automation supporting IEDs/numerical relays

supply of 110volts D.C. numerical overcurrent and earth fault relay

supply of 220 Volts D.C. numerical overcurrent and earth fault relay

supply of 220 Volts D.C. differential relay

supply of 110Volts D.C. Master tripping relay

supply of Galvanised Steel Structures (Lattice Structure)

erection of Galvanised Steel Structures (Lattice Structure)

supply of Galvanised Fasteners, Nuts and Bolts

erection of Galvanised Fasteners, Nuts and Bolts

supply of 2 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

erection of 2 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

supply of 5 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

erection of 5 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

supply of 8 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

erection of 8 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

supply of 16 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS,Galvanised steel wire/strip armoured stranded copper conductor control cable complete

erection of 16 Core, 2.5 sq mm, 1100 V, PVC insulated, PVC sheathed, FRLS,Galvanised steel wire/strip armoured stranded copper conductor control cable complete

supply of 2Core, 6sqmm, 1100V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete

erection of 2Core, 6sqmm, 1100V, PVC insulated, PVC sheathed, FRLS, galvanized steel wire/strip armoured stranded copper conductor control cable complete

4Core, 6sqmm, 1100V, PVC insulated ,PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

erection of 4 Core, 6sqmm, 1100V, PVC insulated ,PVC sheathed, FRLS, galvanised steel wire/strip armoured stranded copper conductor control cable complete

supply of Marshalling kiosk with Kiosk frames stainless steel/hot dip galvanized structural sections for pressed and shaped cold-rolled sheet steel, thickness not less than 2.0 mm. shall be provided with the degree of protection of IP:55, with Copper Bar earthing for 132 KV. I. Marshalling Box shall be outdoor type, rigidly constructed out of sheet steel or aluminium and shall be dust, water and vermin proof. Sheet steel used shall be at least 2.0 mm thick cold rolled. 2. Bay Marshilling Kiosk shall have three separate distinct compartment for the following purpose i) To receive two incoming 415V, 3 phase 63 A AC supply with auto changeover and MCB Unit and distribute minimum six outgoing 415V 3 phase 16 A, supply control by MCB with fuse failure remote indication ii) To distribute minimum 10 outgoing, 240 V, 10A supplies to be control by MCB to be drawn from 3 phase incomer. iii) 200 no. of terminal blocks in vertical formation for interlocking facilities 3. All sheet steel works shall be degreased, pickled, phosphate and then applied with two coats of Zinc chromate primer and two coats of finishing synthetic enamel paint. The colour of finishing paint shall be light admiral grey in accordance with shade no. 697 of IS:5 outside & inside shall be glossy white.

erection of Marshalling kiosk with Kiosk frames stainless steel/hot dip galvanized structural sections for pressed and shaped cold-rolled sheet steel, thickness not less than 2.0 mm. shall be provided with the degree of protection of IP:55, with Copper Bar earthing for 132 KV. I. Marshalling Box shall be outdoor type, rigidly constructed out of sheet steel or aluminium and shall be dust, water and vermin proof. Sheet steel used shall be at least 2.0 mm thick cold rolled. 2. Bay Marshilling Kiosk shall have three separate distinct compartment for the following purpose i) To receive two incoming 415V, 3 phase 63 A AC supply with auto changeover and MCB Unit and distribute minimum six outgoing 415V 3 phase 16 A, supply control by MCB with fuse failure remote indication ii) To distribute minimum 10 outgoing, 240 V, 10A supplies to be control by MCB to be drawn from 3 phase incomer. iii) 200 no. of terminal blocks in vertical formation for interlocking facilities 3. All sheet steel works shall be degreased, pickled, phosphate and then applied with two coats of Zinc chromate primer and two coats of finishing synthetic enamel paint. The colour of finishing paint shall be light admiral grey in accordance with shade no. 697 of IS:5 outside & inside shall be glossy white.

supply of 500mm2 ACSR Moose (a) Aluminum = 54/3.53 mm (b)Steel= 7/3.53 mm overall diameter = 31.77 mm Approx. Wt.= 1998kg/km ultimate strength = 159.60KN

erection of 500mm2 ACSR Moose (a) Aluminum = 54/3.53 mm (b)Steel= 7/3.53 mm overall diameter = 31.77 mm Approx. Wt.= 1998kg/km ultimate strength = 159.60KN

supply of Single Tension Fittings For Single moose shall have minimum failing load of 100% ultimate strength of conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120 KN.

erection of Single Tension Fittings For Single moose shall have minimum failing load of 100% ultimate strength of conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120 KN.

supply of Single Suspension Fittings For Single moose shall have minimum failing load of 50% ultimate strength of conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

erection of Single Suspension Fittings For Single moose shall have minimum failing load of 50% ultimate strength of conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

supply of Single Tension Fittings For Twin moose shall have minimum failing load of 100% ultimate strength of Bundle conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120KN.

erection of Single Tension Fittings For Twin moose shall have minimum failing load of 100% ultimate strength of Bundle conductors with compressive type Tension clamps having slipping strength 95% of ultimate Strength of conductors. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120KN.

supply of Single Suspension Fittings For Twin moose shall have minimum failing load of 50% ultimate strength of bundle conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

erection of Single Suspension Fittings For Twin moose shall have minimum failing load of 50% ultimate strength of bundle conductors with Forged Steel Hanger free center type without bolt only having slipping strength 15% of ultimate strength of conductor. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 70 KN

Supply of Disc Insulators 120 KN, Ball & Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

erection of Disc Insulators 120 KN, Ball & Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

supply of Disc Insulators 90 KN, Ball& Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

erection of Disc Insulators 90 KN, Ball& Socket type, 145mm height and 280mm dia. Creepage total 430 mm and 260 mm protected.

supply of T Clamps 0.5/0.4, made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

erection of T Clamps 0.5/0.4, made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

supply of T Clamps Twin 0.4 / Twin 0.4 , made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

erection of T Clamps Twin 0.4 / Twin 0.4 , made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

supply of P I Clamps 0.2 made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

erection of P I Clamps 0.2 made of Aluminum Alloy and shall comply in all respects with IS:5561-1970 (latest edition)

supply of P G Clamps 0.4 made of Aluminum Alloy and shall comply in all respects withIS:5561-1970 (latest edition)

erection of P G Clamps 0.4 made of Aluminum Alloy and shall comply in all respects withIS:5561-1970 (latest edition)

supply of OPGW, dual window single-mode with mode field diameter 8.6-9.5 um, cladding diameter 125 um+_ 1um

erection of OPGW, dual window single-mode with mode field diameter 8.6-9.5 um, cladding diameter 125 um+_ 1um

Earthwire Tension Clamps comprise of compression type tension clamp with two ‘D’shackles, jumper terminals, nuts &bolts and washers etc. slip strength shall not be less than 95% of the ultimate strength of theground wire. Conductivity shall not be less than corresponding conductivity of GSS ground wire

Earth Mat (40mm dia steel bars) as per approved design, Galavanised Iron (75mm x 12mm/ 50mm x 6 mm) risers for Equipment and Structural Earthing

Concreting of yard & Laying Of Gravel

Cable trays/Racks of size 400mm X3000 mm made of MS Angle 40x40x6 mm,40x6 flat

Laying of 33KV Column foundations (as per Drawing)

Laying of 33KV Isolator foundations (as per Drawing)

dismantling of the existing chain link msh fencing

Laying of 33KV VCB foundations (as per Drawing)

Laying of 33KV CT foundations (as per Drawing)

Laying of 33KV L,A foundations (as per Drawing)

Laying of 33KV Post Insulator foundations (as per Drawing)

Main Duct of Size 900mm x 600mm with concrete grade M15 of size 500 x1000 mm

Sub Main Duct of Size 600mm x 450mm with concrete grade M15 of size 700x500 mm

Tee off Duct:150 mms and filled HDPE pipes from Sub main to Equipments in the outdoor area

providing and fixing G.I. chain link mesh fencing