Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.4 LAccepted-AOC CHENAB VALLEY DIVISION HPPWD UDAIPUR HIMACHAL PRADESH | CHAMBA | HIMACHAL PRADESH | 176207 | ₹6.4 L | L1 | Accepted-AOC ok |
| 2 | L2₹6.5 L+₹9,532.28 (1.50%)Rejected-Finance VILLAGE BALHI DHAVER P O DHANGOTA BARSAR TEHSIL DHATWAL DISTT HAMIRPUR H P 176040 | HAMIRPUR | HAMIRPUR | HIMACHAL PRADESH | 176040 | ₹6.5 L+₹9,532.28 (1.50%) | L2 | Rejected-Finance reject |
Tender Value
₹6.4 L
EMD Value
₹12,710
Closing Date
2 May 2026, 6:00 pmClosed
Executive Engineer HPPWD Shimla Division No. III
. Shimla DIVISION NO. III, HPPWD, Shimla-3
CO Old building of DDUZH block D SH Paint work in Old Geratic ward Near room No. 16, repair of roof Leakage of Old Eye OPDs and adjoining OPDs opposite to block D and repair of Collapsible shutters repair in parking area and pipe work in OT Area for
2026_PWD_135052_4
SD-III-1258-71dt.23-04-2026
Open Tender
Civil Works - Bridges
Percentage
30 days
DDUZH
As per SBD
9 documents required · 9 mandatory
₹350
₹12,710
10 Sept 2026
25 Apr 2026
4 May 2026
25 Apr 2026
2 May 2026
25 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture.(New work) | - | Per Square metre | - | - |
| 2 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade Old work (one or more coats) including carriage of materials in all leads and lifts. | - | Per Square metre | - | - |
| 3 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters Kiln seasoned and chemically treated hollock wood. | - | Per Square metre | - | - |
| 4 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for flooring and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.50 sqm | - | Per Square metre | - | - |
| 5 | Providing wood work in trusses, purlins, rafters, posts, post plates, wall plates and the like wrought framed, hoisted and fixed in position. complete including carriage of materials within all leads and lifts :-2nd class deodar wood. | - | Per Cubic Metre | - | - |
| 6 | Providing and fixing 50x12 mm size wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. in 2nd class teak wood complete including carriage of materials within all leads and lifts. (2nd class teak wood) | - | Per running Metre | - | - |
| 7 | Providing and fixing 0.63 mm thick Colour Coated PGI sheet ceiling/lining of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts. | - | Per Square metre | - | - |
| 8 | Removing and Refixing of C.G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters and trusses including carriage of materials within all leads and lifts | - | Per Square metre | - | - |
| 9 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm dia nominal bore | - | Per running metre | - | - |
| 10 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore | - | Each | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.51 MB
SBD635485.pdf
Tender Documents • 12.34 MB
BOQ_199906.xls
BOQ • 0.33 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .