Re Excavation of rain water harvesting tank in the campus of Vidyasagar University Size and depth as per drawing

Excavation in ordinary rock using hydraluic excavator CK90 and tippers with disposaal upto 1000 mtr excavation for borrow pit in ordinary rock with hydraluic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to enbankment site within all lifts and lead upto 1000 m , trimming bottom and side slopes in accordence with requirments of lines, grades and cross section (Mode of Measurements pre works and post works)

Steps-1

Steps-2

Steps-3

Steps-4

Steps-5

Deduct exist borrowpit

Construction of sub grade and earthen embankment with approved materials obtained from borrowpits with all lifts and leads transporting to site, spreading, grading to required slope and compected to meet requirement of table 300.1 for rural roads of MORD. (Borropit/ pre work post work measurement including filling campus inside down pot hole and borropit and dressing work) (Note:- There has no pond Enbankment formation work only land levelling work is taken in order for excavation water harvesting tank and measurement would be as per finished compected embankment earth work) (a) Carriage up to total lead of 1.0 Km.

Steps-1

Steps-2

Steps-3

Steps-4

Steps-5

Providing & fixing concrete sign board as per IRC specification of size-900x750x37mm thick made with RCC (1:1.5:3) with pakur variety stone chips reinforcement with double layer IRC febric (75x75mm mesh) and fixed with necessary nuts & bolts on two RC precast post 100mm x150mm of height 2.65 m of which top 750 mm as per direction in-charge (The reate is inclusive of cost of R/F, concrete, shuttering, nuts & bolts, washer etc. completed)

Add GST @ 18% (Eighteen Percentage) over item no. 1 to 3

Add Labour Welfare Cess @ 01%(One Percentage) over item no. 1 to 4