Purchase of Lab Equipments Mechanical Department

Tail stock Assembly ● Medium-duty tailstock assembly for dismantling & assembly ● Quill Stroke: Minimum 75 mm ● Taper: MT-3 (preferred standard) ● Feed: Hand wheel operated ● Features: Set-over screws for taper turning ● Spindle locking arrangement ● Body: Cast iron (FG 260) ● Spindle: Hardened steel

Working Model Of Fuel Supply System - Petrol MPFI Type ● Petrol Multi Point Fuel injection (MPFI) system for dismantling and assembly practice ● System type: Non-working / cut-section model for study of internal construction ●Construction: Actual automotive components or equivalent training model mounted on frame ● Includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold ● Includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator ● Includes ignition system components: ignition coil, spark plug, distributor (if applicable) ● ECU module (dummy/display type) with wiring layout representation ● All components cut-open, painted, and clearly labelled ● Provision for manual demonstration of flow path and component interaction ● Mounted on rigid MS powder-coated frame ● Designed for repeated dismantling, assembly, and component identification

Hydraulic Cylinder Bore Diameter: 50 mm ● Stroke Length: 250 mm ● Working Pressure: 160 bar ● Cylinder Tube: Honed steel ● Piston Rod: Hard chrome plated ● Seals: Standard industrial seals ● End Caps: Steel Supply: ● Mounted on training base ● Suitable for dismantling and inspection

Hydraulic Operated Directional Control Valves (DCV) ● Type: Manual spool type DC valve ● Configuration: 4/2 way ● Size: NG06 (CETOP 3) ● Rated Pressure: 210 bar ● Flow Capacity: 20–40 LPM ● Body: Hardened steel / cast steel ● Spool: Ground and hardened ● Ports: Clearly marked (P, A, B, T) Supply: ● Mounted on training plate ● Suitable for dismantling and study

BEARING WITH SHAFT ASSEMBLY ● Type: Dismantling and assembly teaching unit ● Shaft Diameter: 30 mm ● Shaft Material: EN8 steel ● Bearings: Deep groove ball bearing (6205 / 6206) ● Housing: Cast iron ● Locking arrangement: ● Circlips ● End covers Mounting: ● Bench-mounted / frame mounted unit

Coupling Unit Using Driving and Driven Shafts using Plummer Block Bearing Unit ● The Plummer Block Housing Material: Cast Iron (Grade FG 200 or equivalent). Type: SNG or SNL Series (Split-type housing). Sealing: Felt seals or V-ring seals (to demonstrate lubrication retention). Lubrication: Provided with a grease nipple at the top center for manual lubrication practice. ● The Bearing Type: Self-aligning Ball Bearing (1200 series) or Spherical Roller Bearing (22200 series). Bore Diameter: Standard 25mm or 30 mm. ● Shafting and Coupling Shaft Material: Ground Carbon Steel (EN8 or EN9) for high surface finish. ● Coupling Type: Flexible Coupling: To demonstrate the bearing's ability to handle slight misalignment. ● Rigid Flange Coupling: To demonstrate traditional direct connection. ● Driving/Driven Setup: One shaft connected to a small Electric Motor (Driving) and the other to a Brake Drum or Load (Driven).

3D Printing Machine ● Build Volume(WxDxH) 256 x 256 x 256 mm³ ● Shell Enclosed (Plastic & Glass) Hot End All-Metal ● Nozzle 0.4 mm Stainless Steel Included ● Max Hot End Temperature 300 ℃ ● Nozzle Diameter 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm ● Build Plate Compatibility Textured PEI Plate, Cool Plate, Engineering Plate, High Temperature Plate ● Max Build Plate Temperature 100℃ ● Max Speed of Tool Head 500 mm/s ● Max Acceleration of Tool Head 20 m/s² ● Supported Filament PLA, PETG, TPU, PVA, PET, ABS, ASA ● Chamber Monitoring Camera Low ● Rate Camera 1280 x 720/0.5fps ● Time lapse Supported ● Filament Run Out Sensor :Yes ● Control Board Fan Closed Loop Control ● Auxiliary Part Cooling Fan Closed Loop Control ● Air Filter Activated Carbon Filter