Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹1.6 Craccepted-aoc | ₹1.6 Cr | accepted-aoc |
Tender Value
₹1.6 Cr
EMD Value
₹2.4 L
Closing Date
6 Jan 2026, 9:30 pmClosed
Public Works Department
P HEMANTHARAJ
Construction of Dyampur Government High School at Kukunoor Taluk, Koppal District
PWD/2025-26/BD/WORK_INDENT29860
PWD/2025-26/BD/WORK_INDENT29860
Open
Buildings
Two Tender Document System(Two Cover)
PWD Division Office Koppala
11 documents required · 11 mandatory
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Total value of civl engineering works executed and payments received in the last five years (year-wise)
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
List of Financial Resources with Certificates
As per Clause 3.2(b) : To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 (b) satisfactorily completed (at least 50% of the contract value) as prime contractor, at least one similar work such as Building work of value not less than Rs. 81.21 Lakhs.
As per Clause 3.2(c) To qualify for award of this contract, each Tenderer in its Name should have in the last five years i.e., 2020-21, 2021-22 2022-23, 2023-24 & 2024-25 (c) executed in any one year, the following minimum quantities of work (a)Earthwork-651.00Cum(b)RCC/PCC-341.00Cum (c)BBM/SSM/RSM-233.00Cum(d)TMTSteel-29.00Tonne(e)Plastering-2622.00Sqm(f)Flooring-444.00Sqm
As per Clause 3.2(a): To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 (a) achieved in at least two financial years a minimum financial turn over (in all classes of civil engineering construction works only) of Rs. 324.81 Lakhs. (usually not less than two times the estimated annual payments under this contract)
As per Clause 3.3(c) : To qualify for award of this contract, Each Tenderer should further demonstrate: Liquid assets and /or availability of credit facilities of not less than Rs. 44.30 Lakhs.(Credit lines/ letter of credit/ certificates from banks for meeting the fund requirement etc. (usually the equivalent of the estimated cash flow for three months in the peak construction period)
List of works for which tenders already submitted
Cost of existing commitments and ongoing works
List of existing commitments and ongoing works
Cost of work for which Tender acceptance letters received
Litigation in which the Tenderer is involved.
Principal Place of Business
Copy of Registration
₹4,070
₹2.4 L
6 Jan 2026
24 Dec 2025
7 Jan 2026
30 Dec 2025
29 Dec 2025
Construction of Dyampur Government High School at Kukunoor Taluk, Koppal District Ground Floor
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of ...
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. ---...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, be...
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm di...
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remo...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dus...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. ---- including cost of all materials, l...
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Bar- rel type) with necessary screws etc. complete : ---- including cost of all materials, labour, HOM, I
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992
with necessary screws etc. complete : 125mm ---- including cost of all materials, labour, HOM, I
Providing and fixing door latch with necessary screws etc complete. - Oxidised mild steel door latch ---- including cost of all materials, labour, HOM, I
Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...
Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...
Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...
Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...
Printing New Letter and Figures of any Shade - Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade. Ref...
Additional for formwork, Centering & Scaffolding for Sl No 1 a: Foundation upto plinth Isolated As per Appendix-I in Volume-1 of page No.-111 (@8% of Finished Rate) ---- including cost of all material...
Additional for formwork, Centering & Scaffolding for Sl No 9: RCC Columns As per Appendix-I in Volume-1 of page No.-111 (@70% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 2 : Plinth beam As per Appendix-I in Volume-1 of page No.-111 (@50% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 11: Earth retaining structures As per Appendix-I in Volume-1 of page No.-112 (@10% of Finished Rate) ---- including cost of all materials, la...
Additional for formwork, Centering & Scaffolding for Sl No 9 : RCC Columns As per Appendix-I in Volume-1 of page No.-111 (@70% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 2 : Plinth beam As per Appendix-I in Volume-1 of page No.-111 (@50% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 14 : RCC Beams As per Appendix-I in Volume-1 of page No.-112 (@60% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 15 : RCC Roof Slab & Staircase of buildings As per Appendix-I in Volume-1 of page No.-112 (@50% of Finished Rate) ---- including cost of all ...
Additional for formwork, Centering & Scaffolding for Sl No 14 : RCC lintels As per Appendix-I in Volume-1 of page No.-112 (@60% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 19 : Chejjas, Canopy & Other Architectural projections of minor sections As per Appendix-I in Volume-1 of page No.-112 (@45% of Finished Rate...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removi...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...
Providing and fixing suitable plaster mesh 100mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g/m2 width, along route of walls chipped for...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of ...
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup ...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. ---...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, be...
Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm di...
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and in- cluding water thinnable priming coat with cement primer...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remo...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dus...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete. ---- including cost of all materials, l...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for t...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, c...
polyurethane based single Component for New surface - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Bar- rel type) with necessary screws etc. complete : ---- including cost of all materials, labour, HOM, I
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992
with necessary screws etc. complete : 125mm ---- including cost of all materials, labour, HOM, I
Providing and fixing door latch with necessary screws etc complete. - Oxidised mild steel door latch ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 9 : RCC Columns As per Appendix-I in Volume-1 of page No.-111 (@70% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 14 : RCC Beams As per Appendix-I in Volume-1 of page No.-112 (@60% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 15 : RCC Roof Slab & Staircase of buildings As per Appendix-I in Volume-1 of page No.-112 (@50% of Finished Rate) ---- including cost of all ...
Additional for formwork, Centering & Scaffolding for Sl No 14 : RCC lintels As per Appendix-I in Volume-1 of page No.-112 (@60% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 19 : Chejjas, Canopy & Other Architectural projections of minor sections As per Appendix-I in Volume-1 of page No.-112 (@45% of Finished Rate...
Additional for formwork, Centering & Scaffolding for Sl No 9 : RCC Columns As per Appendix-I in Volume-1 of page No.-111 (@70% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nomin...
Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification
I.S. 3620/1979 having compressive strength not le...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off c...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dus...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a pri...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of ...
Additional for formwork, Centering & Scaffolding for Sl No 1 a: Foundation upto plinth Isolated As per Appendix-I in Volume-1 of page No.-111 (@8% of Finished Rate) ---- including cost of all material...
Additional for formwork, Centering & Scaffolding for Sl No 9: RCC Columns As per Appendix-I in Volume-1 of page No.-111 (@70% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 2 : Plinth beam As per Appendix-I in Volume-1 of page No.-111 (@50% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Additional for formwork, Centering & Scaffolding for Sl No 9 : RCC Columns As per Appendix-I in Volume-1 of page No.-111 (@70% of Finished Rate) ---- including cost of all materials, labour, HOM, I
Concealed conduit system :supplying……mm dia 2mm 2.5mm thick heavy guage PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive pasteetc., and running before concreting the sl...
Concealed conduit system :supplying……mm dia 2mm 2.5mm thick heavy guage PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive pasteetc., and running before concreting the sl...
Groove cutting : supplying…….dia 2mm/2.5mm thick heavy guage PVC conduit pipe with bends, metal junction boxes adhesive paste etc., and bracing U or J hooks and cement plastering up to the surface...
Groove cutting : supplying…….dia 2mm/2.5mm thick heavy guage PVC conduit pipe with bends, metal junction boxes adhesive paste etc., and bracing U or J hooks and cement plastering up to the surface...
Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existin PVC conduit /casing caping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without swi...
Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existin PVC conduit /casing caping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without swi...
Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existin PVC conduit /casing caping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without swi...
Point wiring using copper wire without switch. Supplying and wiring adopting loop system in existin PVC conduit /casing caping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without swi...
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 3 way
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 4-5 way
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 6 way
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 8 way
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 10-12 way
Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in brick/stone /c.c wall 16 way
Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing...
Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing...
Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing...
Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing...
Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing...
Supplying and fixing superior quality modular switch mounting poly carbonate plate with necessary supporting back plate with required nos. of machine screws, bolts, nuts etc., complete on the existing...
Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 6Amps one way
---- including c...
Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 6Amps 2 way
---- including cos...
Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 6Amps 3 way socket
Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials Stepped fan regulator
Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 16Amps 1 way switch
Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 32Amps DP switch
---- includin...
Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials 6/16Amps universal socket
Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials TV/Telephone socket
Supplying and fixing of modular switch/socket /stepped electronic fan regulator/dimmer/telephone socket etc on excistin modular switch plate. Using group 'A' materials RJ45/I.O outlet
---- including ...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100v grade,multis and copper with low conductor resistance single core wire in open or consealed system of wiring with specified I...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100v grade,multis and copper with low conductor resistance single core wire in open or consealed system of wiring with specified I...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100v grade,multis and copper with low conductor resistance single core wire in open or consealed system of wiring with specified I...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100v grade,multis and copper with low conductor resistance single core wire in open or consealed system of wiring with specified I...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100v grade,multis and copper with low conductor resistance single core wire in open or consealed system of wiring with specified I...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying, fixing and wiring Residual currrent circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/panel board. 63 Amps 4 pole
---- including cost of all materials, labour, HOM,...
Supplying, fixing, wiring, earth electrode for grounding
conduits, I.C. cutouts and other equipment's on the meter
board using 40mm dia 2.90mm thick GI pipe 2.5 mtr
long buried in a pit … The pit sh...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x6mm GI Strip
---- including cost of all materials, labour, HOM, I
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm Copper Strip
---- including cost of all materials, labour, HOM, I
Supplying of PVC Batten with integrated LED tube LED light fighting 1 x4'- 36/40 w with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input: 220-240V 5...
Supplying & fixing of retrofit type - LED bulb.W with
OPAL acrylic diffuser comprising of LED source with CCT
6500 degree K, CRI 70%. efficacy 80 lumen per watt,
life 25000 burning hours and Complianc...
Supplying exhaust fan of 1440 RPM of 300 mm (12"") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply.
---- including cost of all materials, labour, HOM, I
Extra for supplying 4mm thick white plastic plate and covering for junction boxes of size 110mm conduite using necessary machine screws.
---- including cost of all materials, labour, HOM, I
Supplying & Fixing of 230 Volts 20/40 watts Fluorescent
---- including cost of all materials, labour, HOM, I
Supplying and fixing Metal Fan Box with Round Hook
---- including cost of all materials, labour, HOM, I
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts,50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball...
Fixing all types and all capacities fluorecent/false ceiling/spot light/CFL fittings indoor on the wall / rafter / girders using 23/0.0076" twin twisted PVC insulated wires, required nos of round bloc...
Fixing a ceiling/wall mounting fan of all capacities and all types to the existing S hook together with supplying and fixing a 5 amperes ceiling rose,necessary lenth of 23/0.0076 inch PVC insluted twi...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 A. ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire.
---- including cost of a...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 70 Sqmm...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 35 to 95 Sqmm
---- including cost of all materials, la...
Heavy Duty Copper Terminal Long Barrel 70 Sqmm Copper Terminal, Apprx Wt: 38 Gm
---- including cost of all materials, labour, HOM, I
Making and Fixing pot head for LT UG Cable Heat shrinkable Straight Through Joint 35 to 95 Sqmm
---- including cost of all materials, labour, HOM, I
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with therm...
Supplying of multi function digital meter with three line back light LCD type display for voltage,Current,frequency,Power, Powerfactor,KVA,KWH,KVARsuitable for 3 Phase,4 wire LT network with IP 54 deg...
Supplying,fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based,digital readout of percentage leakage curren...
Supplying, fixing and wiring 50/5A to 400/5A 5VA Burden class 1 Current Transformer.
---- including cost of all materials, labour, HOM, I
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required.
5.17.9)50-63Amps TPN
---- including cost of all m...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required.
5.17.6)50-63Amps DP
---- including cost of all ma...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required.
5.17.4)6-32Amps DP
---- including cost of all mat...
Supplying,fixing and Fixing of Shunt trip suitable for MCCB. CBCT
---- including cost of all materials, labour, HOM, I
Supplying ….amps rated 3phase with netural bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/ERP/DMC insulator which...
Supplying ….amps rated 3phase with netural bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/ERP/DMC insulator which...
Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped wit...
Supplying and fixing of LED type pannel board indicating lamp with reqired colour suitable for 220v A.C.50 Hz 12/24v D.C.
---- including cost of all materials, labour, HOM, I
Supplying of an load change over switches 4 poles AC-23A Duty 415V, 50Hz, AC Supply (Open Execution) 100 Amps
---- including cost of all materials, labour, HOM, I
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
WI No 29860 KW-4 Yel.docx
Tender Document • 0.94 MB
Star rates.docx
Others - Star rates • 6.58 MB
Formats.xlsx
Others - Formats • 0.05 MB
1KBS-Section-16 Electrification-Internal.doc
Others - Specifications • 0.32 MB
Road specification.doc
Others - Specifications • 2.70 MB
Section-13 Water-Supply.doc
Others - Specifications • 5.43 MB
Building specifications.doc
Others - Specifications • 0.97 MB
Road concrete pavement specification.doc
Others - Specifications • 2.57 MB
2 KBS-Section-16 Electrification-External.doc
Others - Specifications • 0.52 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .