REPAIR TO PATH HARD STANDING INTERLOCKING TILES DRAINS AND MISCELLANEOUS BR WORKS AT SECTOR B UNDER AGE BRII OF GE 865 EWS

Amount

Rendering 15 mm thick on fair faces of brick work or stone masonary work, finished even and smooth (without using extra cement) on walls in cement mortar (1:4), including taking down cement plaster of any description on brick or stone walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water remove dust, debries/rubbish etc, complete all as specified and as directed.

M&L for two coats cement base paint over a coat of primer on newly plastered surfaces of wall including preparation of surfaces including curing before and after applying each coat complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles/concrete block walling complete all as specified and as directed

M&L for pre cast cement concrete block masonary of 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, exc.10cm in width, set and jointed in cement mortor 1:6 complete all as specified and directed.

M&L for pre cast cement concrete block masonary of 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, using old concrete blocks obtained from the demolition, exc.10cm in width, set and jointed in cement mortor 1:6 complete all as spd and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, using old stones/boulders obtained from the demolition complete all as specified and as directed.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 100 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L for plain cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) 100 mm thick , as in floors and pavings complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub base .

M&L forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade B, complete all as specified and directed.

Material & Labour 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection including making proper joints with bitumen mastic with sand as per specification at an interval of 3m complete all as specified and as directed.

Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate), as in , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs not provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for coloured chequred cement concrete tiles, machine pressed, factory made of size 300mm X 300mm X 25mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & no pigments and laid over and including 20mm thick cement screed base (1:4) complete all as specified and as directed by Engr-in -Charge.

M&L Sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed.

M&L for machine pressed / vibro mechanically floated precast concrete interlocking cement paver block ISI marked, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of grey cement and pigment, laid over and including 25mm thick sand cushioning complete. Shape pattern of laying shall be approved by Engineer-in-charge.

M&L for machine pressed / vibro mechanically floated precast concrete interlocking cement paver block ISI marked, any shape and size conforming to IS 15658-2006 of 80mm thickness, M-40 Grade, with topping of grey cement and pigment, laid over and including 25mm thick sand cushioning complete. Shape pattern of laying shall be approved by Engineer-in-charge.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite black complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for and removing debris outside the MD land.

M & L PCC 1:3:6 type C2 using 40mm graded aggregate in surface channels and drain, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc.

M&L for factory made precast PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregates, as in kerb stone of size 300 x 300x 100mm thick (width and depth of kerb stone shall be 100mm & 300mm respectively) set in CM (1:4) including necessary form works and earth work complete all as specified and directed by Engr-in-Charge.

M&L for one coats of Synthetic emulsion paint of any description on old plastered surfaces or concrete surface of any description over 10cm girth or width not other wise described including preparation, complete all as specified and directed by Engineer-in-Charge.

M&L for two coats of Synthetic emulsion paint of any description on new/old plastered surfaces or concrete surface of any description over 10cm girth or width not other wise described over a coat of primer.complete all as specified and directed by Engineer-in-Charge.

M&L for applying one coat of oil exterior emulsion paint (Apex Ultima) on old plastered or treated surfaces surfaces of desired finish as app by Eng-in-charge

Deduct Schedule of Credit of Rs (-) 52050.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

Rampal Singh Contractor (BID ID -3295370)

PARIDHI CONSTRUCTION (BID ID -3299280)

M/S INDUS HIMALAYAN EXPLORERS (BID ID -3297115)

M/S MUNEER HASSAN AKHON (BID ID -3304183)

VIMAL TRADERS AND SUPPLIERS (BID ID -3304325)

TIRUPATI ENGINEERS CORPORATION (BID ID -3303489)

MEDHI ALI GRONGPA (BID ID -3304600)