Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹87.4 LAdmitted-Finance SAGAR COLONY STATION ROAD PO DISTRICT BALANGIR ODISHA | BALANGIR | BALANGIR | ODISHA | -17.99% | ₹87.4 L | L1 | Admitted-Finance |
| 2 | L1₹87.4 LAdmitted-Finance AT MAGURGANDAPATNA PO BHARATPUR P S KENDRAPADA DIST KENDRAPADA | CUTTACK | ODISHA | 754134 | -17.99% | ₹87.4 L | L1 | Admitted-Finance |
| 3 | L2₹88.2 LAdmitted-Finance 1ST FLOOR PARAMA PARASA AT CHANDESWAR PO DEBIDWAR JAJPUR 755007 | BHADRAK | ODISHA | 755007 | -17.20% | ₹88.2 L | L2 | Admitted-Finance |
| 4 | L3₹99.1 LAdmitted-Finance AT HOUSE NO A 48 N K NAGAR PO SONAPARBAT DIST SUNDARGARH | SUNDARGARH | ODISHA | 754217 | -7.00% | ₹99.1 L | L3 | Admitted-Finance |
Tender Value
₹1.1 Cr
EMD Value
₹1.1 L
Closing Date
16 Feb 2026, 5:00 pmClosed
S.E. Electrical Circle (RandB) Bhubaneswar
S.E. Electrical Circle (RandB) Bhubaneswar, Nirman Soudha, Unit-V, 751001.
Shifting of 11KV HT and LT line and Substation for Construction of the work improvement of Kusanga to Block Boundry near Banigochha ODR road from CH.0/000km to CH.24/160 km, Boudha
2026_EICCL_125238_1
Bid Identification No.S.E.E.C (RandB) 26/2025-26.
National Competitive Bid
Electrical Works
180 days
Boudh
Please refer Tender documents.
2 documents required · 2 mandatory
₹10,000
₹1.1 L
27 Feb 2026
31 Jan 2026
17 Feb 2026
31 Jan 2026
16 Feb 2026
31 Jan 2026
31 Jan 2026 - 7 Feb 2026
9 MTR LOG 300 KG PSC POLE DUE TO ROAD CROSSING
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
3X50+1X35 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
9 MTR LOG 300 KG PSC POLE DUE TO ROAD CROSSING
8 MTR LONG 200 KG PSC POLE
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
1X35+1X25 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
9 MTR LOG 300 KG PSC POLE DUE TO ROAD CROSSING
8 MTR LONG 200 KG PSC POLE
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
1X35+1X25 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
9 MTR LOG 300 KG PSC POLE DUE TO ROAD CROSSING
8 MTR LONG 200 KG PSC POLE
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
3X50+1X35 SQMM AB CABLE
1X35+1X25 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
9 MTR LOG 300 KG PSC POLE
8 MTR LONG 200 KG PSC POLE
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
3X50+1X35 SQMM AB CABLE
1X35+1X25 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
9 MTR LOG 300 KG PSC POLE
8 MTR LONG 200 KG PSC POLE
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
3X50+1X35 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
9 MTR LOG 300 KG PSC POLE
8 MTR LONG 200 KG PSC POLE
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
3X50+1X35 SQMM AB CABLE
1X35+1X25 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
9 MTR LOG 300 KG PSC POLE
8 MTR LONG 200 KG PSC POLE
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
1X35+1X25 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
9 MTR LOG 300 KG PSC POLE
8 MTR LONG 200 KG PSC POLE
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
3X50+1X35 SQMM AB CABLE
1X35+1X25 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
9 MTR LOG 300 KG PSC POLE
8 MTR LONG 200 KG PSC POLE
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
3X50+1X35 SQMM AB CABLE
1X35+1X25 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
9 MTR LOG 300 KG PSC POLE
8 MTR LONG 200 KG PSC POLE
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
3X50+1X35 SQMM AB CABLE
1X35+1X25 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
WPB 160x152,11 MTR LONG,30.44 KG/MTR 11 MTR WITH BASE PLATE
9 MTR LOG 300 KG PSC POLE
RCC BASE PLATE
EARTHING OF SUPPORT (COIL TYPE)
NO-8 GI WIRE DIA 4.6 MM 0.131KG/MTR - 2MTR EACH POLE CONNECTING POLE WITH EARTHING
100X50X6 MM GI CHANNEL FOR STRAIGHT CROSS ARM 1.2 MTR EACH 22 NO & 0.2 MTR LONG 22 NOS FOR 5 NOS OF CUT POINT & 1 NO OF TAPPING POINT
DISC INSULATOR(B&S) 70 KN POLYMER
HW FITTINGS (B&S) 70 KN 3 BOLTED
80SQMM AAA CONDUCTOR
PG CLAMP FOR 80 SQMM AAA CONDUCTOR
FISH PLATE 50X8 MM, 3.14 KG/MTR EACH .280 MTR LENGTH
11 KV V CROSS ARM 10.2 KG
GI BACK CLAMP FOR V CROSS ARM (0.85 KG)
11 KV F CLAMP 2.9 KG
11 KV PIN INSULATOR POLYMER
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95 KG/PAIR)
7/10 GI STAY WIRE
GI NUTS ,BOLTS, WASHER
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE(3 KG PER SUPPORT)
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
9 MTR LOG 300 KG PSC POLE
RCC BASE PLATE
EARTHING COLL SUPPORT
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR -2 MTR FOR CONNECTING POLE WITH COIL EARTHING
TRANSFORMER MOUNTING BRACKET (65X65X6)MM SUITABLE FOR 16/10 KVA 11/.23 KV
AB SWITCH MOUNTING BRACKET (75X40X6)MM 6 MTR 6.8 KG/MTR
CANTILEVER FOR SUPPORTING AB SWITCH ARM 50X40X6 MM ANGLE 3.5 MTR LONG(4.5 KG/MTR)
HORNGAP FUSE MOUNTING CHANNEL (75X40X6)MM 2.2 MTR 6.8 KG/MTR
DISC INSULATOR (T&C) 45 KN 2 BOLTED
HARD WARE FITTINGS T&C TYPE 45KN (2 BOLTED)
11 KV AB SWITCH 2 POLE (200 AMP)
11 KV HG FUSE 2 POLE (200 AMP)
LIGHTNING ARRESTER(9 KV,10 KA)
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95 KG/MTR)
7/10 SWG STAY WIRE
GI PIPE EARTHING 40 MM DIA MEDIUM GAUGE 3 MTRS LONG
25X4 MM GI FLAT(NEUTRAL)
25X6 MM GI FLAT
55 SQMM AAAC
PG CLAMP FOR 55 SQMM AAA CONDUCTOR
FISH PLATE 50X8 MM ,3.14 KG/MTR EACH 2.8 MTR LENGTH
GI NUTS,BOLTS,WASHERS
LT DISTRIBUTION BOX FOR 16 KVA SUBSTATION
16 SQMM LT2 CORE PVC CABLE
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
GAURDING CROSS ARM OF 75X40X6 MM GI CHANNEL 1.8 MTR LONG 4 NOS @ 6.8 KG/MTR
EYE HOOK FOR CRADLE GUARD
NO-6,N0-8,NO-10 GI WIRE (DIA 4.8 MM) FOR GAURDING
25X6 MM GI FLAT FOR EARTHING 1.2 KG/MTR
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
40 MM NOMINAL BORE GI PIPE (MEDIUM GAUGE) EARTHING DEVICE WITH 3 MTR LONG
GI NUTS,BOLTS ,WASHER
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
CONCRETING OF 11 MTR WPB POLE IN RATIO 1:1.5:3 =0.45 CUM @ 6648.85 =0.45X6648.85=RS 2991.98
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
SUPPLY AND ERECTION OF GI FENCING WITH GATE AS PER STANDARD SPECIFICATIONS .PROVIDING AND FIXING GALVANIZE D STEEL CHAIN LINK FENCING WITH 75X75 MM MESH SIZE ,4.0 MM DIA MESH WIRECONFIRMING TO IS:2721,GI STRIP WIRE 2.5 MM DIA WITH TIE WIRE 6 MM DIA MILD GI STEEL INCLUDING PROVIDING 25X4.75 MM GI STRETCHER BARS.EYE BOLT STRAINERS.RING NUTS,HAIR PINS,STAPLESOF 3.5 MM WIRE,CLEATS OF GI ANGLE 75X60X6MM ,MS DROPPERS OF 25X4.75MM WITH 38X4.85MM HALF ROUND STAPLESETC. COMPLETED AS PER DRAWINGS AND SPECIFIED, AS DIRECTED.THE SCOPE INCLUDES SUPPLY OF FLAT ,ANGLE,CIVIL MATERIAL,CIVIL,EXCAVATION,CONCRETING,BRICK WORK,PAINTING,WELDING,TRANSPORTATION ETC.
MATERIALS AND MASSIONARY WORK FOR EARTH PIT,CAHRCOAL SALT ETC INCLUDING CONSTRUCTION OF EARTHING CHAMBER (SIZE 2"X2") AND RCC SLAB COVERING
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIASMANTLING OF 11/0.4 KV ,33/0.4 KV THREE PHASE DISTRIBUTION TRANSFORMER 16 KVA INCLUDING REMOVAL OF HT/LT LEADS,EARTH SCOPE OF WORK ALSO INCLUDES LOADING TRANSPORTATION, UNLOADING AND STAKING AT A PROPER PLACE IN SAFE POSITION/SITE STORE
DISMANTLE STEEL STRUCTURE OF LINES AND SUBSTATION
DISMANTLING OF ACSR/AAAC 80/100 SQMM CONDUCTOR
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
SURVEY & DIGITIZATION OF NEW DSS AND ITSINTERNALS INCLUDING ATTRIBUTES
WPB 160x152,11 MTR LONG,30.44 KG/MTR 11 MTR WITH BASE PLATE
9 MTR LOG 300 KG PSC POLE
RCC BASE PLATE
EARTHING OF SUPPORT (COIL TYPE)
NO-8 GI WIRE DIA 4.6 MM 0.131KG/MTR - 2MTR EACH POLE CONNECTING POLE WITH EARTHING
100X50X6 MM GI CHANNEL FOR STRAIGHT CROSS ARM 1.2 MTR EACH 22 NO & 0.2 MTR LONG 22 NOS FOR 5 NOS OF CUT POINT & 1 NO OF TAPPING POINT
DISC INSULATOR(B&S) 70 KN POLYMER
HW FITTINGS (B&S) 70 KN 3 BOLTED
80SQMM AAA CONDUCTOR
PG CLAMP FOR 80 SQMM AAA CONDUCTOR
FISH PLATE 50X8 MM, 3.14 KG/MTR EACH .280 MTR LENGTH
11 KV V CROSS ARM 10.2 KG
GI BACK CLAMP FOR V CROSS ARM (0.85 KG)
11 KV F CLAMP 2.9 KG
11 KV PIN INSULATOR POLYMER
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95 KG/PAIR)
7/10 GI STAY WIRE
GI NUTS ,BOLTS, WASHER
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE(3 KG PER SUPPORT)
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
9 MTR LOG 300 KG PSC POLE
RCC BASE PLATE
EARTHING COLL SUPPORT
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR -2 MTR FOR CONNECTING POLE WITH COIL EARTHING
TRANSFORMER MOUNTING BRACKET (65X65X6)MM SUITABLE FOR 16/10 KVA 11/.23 KV
AB SWITCH MOUNTING BRACKET (75X40X6)MM 6 MTR 6.8 KG/MTR
CANTILEVER FOR SUPPORTING AB SWITCH ARM 50X40X6 MM ANGLE 3.5 MTR LONG(4.5 KG/MTR)
HORNGAP FUSE MOUNTING CHANNEL (75X40X6)MM 2.2 MTR 6.8 KG/MTR
DISC INSULATOR (T&C) 45 KN 2 BOLTED
HARD WARE FITTINGS T&C TYPE 45KN (2 BOLTED)
11 KV AB SWITCH 2 POLE (200 AMP)
11 KV HG FUSE 2 POLE (200 AMP)
LIGHTNING ARRESTER(9 KV,10 KA)
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95 KG/MTR)
7/10 SWG STAY WIRE
GI PIPE EARTHING 40 MM DIA MEDIUM GAUGE 3 MTRS LONG
25X4 MM GI FLAT(NEUTRAL)
25X6 MM GI FLAT
55 SQMM AAAC
PG CLAMP FOR 55 SQMM AAA CONDUCTOR
FISH PLATE 50X8 MM ,3.14 KG/MTR EACH 2.8 MTR LENGTH
GI NUTS,BOLTS,WASHERS
LT DISTRIBUTION BOX FOR 16 KVA SUBSTATION
16 SQMM LT2 CORE PVC CABLE
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
GAURDING CROSS ARM OF 75X40X6 MM GI CHANNEL 1.8 MTR LONG 4 NOS @ 6.8 KG/MTR
EYE HOOK FOR CRADLE GUARD
NO-6,N0-8,NO-10 GI WIRE (DIA 4.8 MM) FOR GAURDING
25X6 MM GI FLAT FOR EARTHING 1.2 KG/MTR
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
40 MM NOMINAL BORE GI PIPE (MEDIUM GAUGE) EARTHING DEVICE WITH 3 MTR LONG
GI NUTS,BOLTS ,WASHER
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
CONCRETING OF 11 MTR WPB POLE IN RATIO 1:1.5:3 =0.45 CUM @ 6648.85 =0.45X6648.85=RS 2991.98
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
SUPPLY AND ERECTION OF GI FENCING WITH GATE AS PER STANDARD SPECIFICATIONS .PROVIDING AND FIXING GALVANIZE D STEEL CHAIN LINK FENCING WITH 75X75 MM MESH SIZE ,4.0 MM DIA MESH WIRECONFIRMING TO IS:2721,GI STRIP WIRE 2.5 MM DIA WITH TIE WIRE 6 MM DIA MILD GI STEEL INCLUDING PROVIDING 25X4.75 MM GI STRETCHER BARS.EYE BOLT STRAINERS.RING NUTS,HAIR PINS,STAPLESOF 3.5 MM WIRE,CLEATS OF GI ANGLE 75X60X6MM ,MS DROPPERS OF 25X4.75MM WITH 38X4.85MM HALF ROUND STAPLESETC. COMPLETED AS PER DRAWINGS AND SPECIFIED, AS DIRECTED.THE SCOPE INCLUDES SUPPLY OF FLAT ,ANGLE,CIVIL MATERIAL,CIVIL,EXCAVATION,CONCRETING,BRICK WORK,PAINTING,WELDING,TRANSPORTATION ETC.
MATERIALS AND MASSIONARY WORK FOR EARTH PIT,CAHRCOAL SALT ETC INCLUDING CONSTRUCTION OF EARTHING CHAMBER (SIZE 2"X2") AND RCC SLAB COVERING
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIASMANTLING OF 11/0.4 KV ,33/0.4 KV THREE PHASE DISTRIBUTION TRANSFORMER 16 KVA INCLUDING REMOVAL OF HT/LT LEADS,EARTH SCOPE OF WORK ALSO INCLUDES LOADING TRANSPORTATION, UNLOADING AND STAKING AT A PROPER PLACE IN SAFE POSITION/SITE STORE
DISMANTLE STEEL STRUCTURE OF LINES AND SUBSTATION
DISMANTLING OF ACSR/AAAC 80/100 SQMM CONDUCTOR
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
SURVEY & DIGITIZATION OF NEW DSS AND ITSINTERNALS INCLUDING ATTRIBUTES
WPB 160x152,11 MTR LONG,30.44 KG/MTR 11 MTR WITH BASE PLATE
9 MTR LOG 300 KG PSC POLE
RCC BASE PLATE
EARTHING OF SUPPORT (COIL TYPE)
NO-8 GI WIRE DIA 4.6 MM 0.131KG/MTR - 2MTR EACH POLE CONNECTING POLE WITH EARTHING
100X50X6 MM GI CHANNEL FOR STRAIGHT CROSS ARM 1.2 MTR EACH 22 NO & 0.2 MTR LONG 22 NOS FOR 5 NOS OF CUT POINT & 1 NO OF TAPPING POINT
DISC INSULATOR(B&S) 70 KN POLYMER
HW FITTINGS (B&S) 70 KN 3 BOLTED
80SQMM AAA CONDUCTOR
PG CLAMP FOR 80 SQMM AAA CONDUCTOR
FISH PLATE 50X8 MM, 3.14 KG/MTR EACH .280 MTR LENGTH
11 KV V CROSS ARM 10.2 KG
GI BACK CLAMP FOR V CROSS ARM (0.85 KG)
11 KV F CLAMP 2.9 KG
11 KV PIN INSULATOR POLYMER
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95 KG/PAIR)
7/10 GI STAY WIRE
GI NUTS ,BOLTS, WASHER
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE(3 KG PER SUPPORT)
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
GAURDING CROSS ARM OF 75X40X6 MM GI CHANNEL 1.8 MTR LONG 4 NOS @ 6.8 KG/MTR
EYE HOOK FOR CRADLE GUARD
NO-6,N0-8,NO-10 GI WIRE (DIA 4.8 MM) FOR GAURDING
25X6 MM GI FLAT FOR EARTHING 1.2 KG/MTR
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
40 MM NOMINAL BORE GI PIPE (MEDIUM GAUGE) EARTHING DEVICE WITH 3 MTR LONG
GI NUTS,BOLTS ,WASHER
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
CONCRETING OF 11 MTR WPB POLE IN RATIO 1:1.5:3 =0.45 CUM @ 6648.85 =0.45X6648.85=RS 2991.98
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
MATERIALS AND MASSIONARY WORK FOR EARTH PIT,CAHRCOAL SALT ETC INCLUDING CONSTRUCTION OF EARTHING CHAMBER (SIZE 2"X2") AND RCC SLAB COVERING
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DISMANTLE STEEL STRUCTURE OF LINES AND SUBSTATION
DISMANTLING OF ACSR/AAAC 80/100 SQMM CONDUCTOR
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
WPB 160x152,11 MTR LONG,30.44 KG/MTR 11 MTR WITH BASE PLATE
EARTHING OF SUPPORT (COIL TYPE)
NO-8 GI WIRE DIA 4.6 MM 0.131KG/MTR - 2MTR EACH POLE CONNECTING POLE WITH EARTHING
80SQMM AAA CONDUCTOR
11 KV V CROSS ARM 10.2 KG
GI BACK CLAMP FOR V CROSS ARM (0.85 KG)
11 KV F CLAMP 2.9 KG
11 KV PIN INSULATOR POLYMER
GI NUTS ,BOLTS, WASHER
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE(3 KG PER SUPPORT)
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
GAURDING CROSS ARM OF 75X40X6 MM GI CHANNEL 1.8 MTR LONG 4 NOS @ 6.8 KG/MTR
EYE HOOK FOR CRADLE GUARD
NO-6,N0-8,NO-10 GI WIRE (DIA 4.8 MM) FOR GAURDING
25X6 MM GI FLAT FOR EARTHING 1.2 KG/MTR
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
40 MM NOMINAL BORE GI PIPE (MEDIUM GAUGE) EARTHING DEVICE WITH 3 MTR LONG
GI NUTS,BOLTS ,WASHER
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 11 MTR WPB POLE IN RATIO 1:1.5:3 =0.45 CUM @ 6648.85 =0.45X6648.85=RS 2991.98
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
MATERIALS AND MASSIONARY WORK FOR EARTH PIT,CAHRCOAL SALT ETC INCLUDING CONSTRUCTION OF EARTHING CHAMBER (SIZE 2"X2") AND RCC SLAB COVERING
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DISMANTLE STEEL STRUCTURE OF LINES AND SUBSTATION
DISMANTLING OF ACSR/AAAC 80/100 SQMM CONDUCTOR
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
WPB 160X152 (30.44 KG/MTR) 11 MTR WITH BASE PLATE
EARTHING COLL SUPPORT
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR -2 MTR FOR CONNECTING POLE WITH COIL EARTHING
TOP PRESSURE GI CHANNEL 100X50X6 MM EACH 2.8 MTR LONG 2 NOS (@9.2 KG/MTR)
GI channel for supporting DP arm,75x40x6,2.8 mtr long,4 nos
Bracing angle(50x50x6)mm GI angle,4 mtr long,2 nos,4.5 kg/mtr
DISC INSULATOR (B&S) 70 KN POLYMER
HARD WARE FITTINGS B&S TYPE 70KN (3 BOLTED)
PG CLAMP FOR 80 SQMM AAA CONDUCTOR
FISH PLATE 50X8 MM 3.14 KG/MTR EACH .280 MTR LENGTH
11 KV PIN INSULATOR POLYMER
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
40 MM NOMINAL BORE GI PIPE (MEDIUM GAUGE) EARTHING DEVICE WITH 3 MTR LONG
25X6 MM GI FLAT FOR EARTHING 1.2 KG/MTR
DANGER BOARD
BACK CLAMP FOR DANGER BOARD 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH FOR EACH BACK CLAMP
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP) 4 PC/SUPPORT
GI, NUTS, BOLTS & WASHER
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
WPB 160x152,11 MTR LONG,30.44 KG/MTR 11 MTR WITH BASE PLATE
9 MTR LOG 300 KG PSC POLE
RCC BASE PLATE
EARTHING OF SUPPORT (COIL TYPE)
NO-8 GI WIRE DIA 4.6 MM 0.131KG/MTR - 2MTR EACH POLE CONNECTING POLE WITH EARTHING
100X50X6 MM GI CHANNEL FOR STRAIGHT CROSS ARM 1.2 MTR EACH 22 NO & 0.2 MTR LONG 22 NOS FOR 5 NOS OF CUT POINT & 1 NO OF TAPPING POINT
DISC INSULATOR(B&S) 70 KN POLYMER
HW FITTINGS (B&S) 70 KN 3 BOLTED
80SQMM AAA CONDUCTOR
PG CLAMP FOR 80 SQMM AAA CONDUCTOR
FISH PLATE 50X8 MM, 3.14 KG/MTR EACH .280 MTR LENGTH
11 KV V CROSS ARM 10.2 KG
GI BACK CLAMP FOR V CROSS ARM (0.85 KG)
11 KV F CLAMP 2.9 KG
11 KV PIN INSULATOR POLYMER
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95 KG/PAIR)
7/10 GI STAY WIRE
GI NUTS ,BOLTS, WASHER
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE(3 KG PER SUPPORT)
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
AB SWITCH MOUNTING GI CHANNEL 75X40X6 -2.8 MTR LONG ,2 NOS (6.8 KG/MTR)
AB SWITCH SIDE SUPPORT CHANNEL 100X50X6 MM 9.2 KG/MTR EACH CHANNEL LENGTH 0.35 MTR 2 NOS CHANNEL REQUIRED
CHANNEL SUPPORT FOR DOWN PIPE 75X40X6 MM 6.8 KG/MTR EACH CHANNEL LENGTH 0.8 MTR 1 NOS CHANNEL REQUIRED
11 KV AB SWITCH 3 POLE (400 AMP)
LIGHTNING ARRESTER(9 KV,10 KA)
GI PIPE EARTHING 40 MM DIA MEDIUM GAUGE 3 MTRS LONG
25X6 MM GI FLAT
SUNDRIES
75X40X6 MM GI CHANNEL STRIGHT CROSS ARM 3MTR LONG 2 NOS @ 6.8 KG/MTR FOR ROAD CROSSING GUARDING
75X40X6 MM GI CHANNEL STRIGHT CROSS ARM 3.5 MTR LONG 4 NOS @ 6.8 KG/MTR FOR ROAD CROSSING GUARDING
EYE HOOK FOR CRADLE GUARD
NO-6,N0-8,NO-10 GI WIRE (DIA 4.8 MM) FOR GAURDING
25X6 MM GI FLAT FOR EARTHING 1.2 KG/MTR
40 MM NOMINAL BORE GI PIPE (MEDIUM GAUGE) EARTHING DEVICE WITH 3 MTR LONG
GI NUTS,BOLTS ,WASHER
9 MTR LOG 300 KG PSC POLE
8 MTR LONG 200 KG PSC POLE
RCC BASE PLATE
EARTHING SUPPORT COIL TYPE
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR 2 MTR FOR CONNECTING POLE WITH COIL EARTHING
LT STAY SET COMPLETE
LT STAY INSULATOR
LT STAY CLAMP
7/12 SWG STAY WIRE
3X50+1X35 SQMM AB CABLE
POLE CLAMP FOR EYE HOOK
DEAD END CLAMP FOR EYE HOOK
SUSPENSION CLAMP WITH EYE HOOK
DANGER BOARD
ANTICLIMBING DEVICE (GI BARBED WIRE 3 KG PER SUPPORT)
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
GI NUTS BOLTS AND WASHERS
BACK CLAMP FOR ACD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
BACK CLAMP FOR DANGER BOARD (25X3 MM GI EARTH FLAT 0.59 KG/MTR & 0.51 MTR FOR EACH BACK CLAMP)
SUNDRIES
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
CONCRETING OF 11 MTR WPB POLE IN RATIO 1:1.5:3 =0.45 CUM @ 6648.85 =0.45X6648.85=RS 2991.98
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
MATERIALS AND MASSIONARY WORK FOR EARTH PIT,CAHRCOAL SALT ETC INCLUDING CONSTRUCTION OF EARTHING CHAMBER (SIZE 2"X2") AND RCC SLAB COVERING
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DISMANTLE STEEL STRUCTURE OF LINES AND SUBSTATION
DISMANTLING OF ACSR/AAAC 80/100 SQMM CONDUCTOR
DIAMANTLING OF VARIOUS SIZE OF LT AB CABLE FROM OVER HEAD LINE ,RECOILING,LOADING TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION/BA SITE STORE
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
WPB 160x152,11 MTR LONG,30.44 KG/MTR 11 MTR WITH BASE PLATE
EARTHING OF SUPPORT (COIL TYPE)
NO-8 GI WIRE DIA 4.6 MM 0.131KG/MTR - 2MTR EACH POLE CONNECTING POLE WITH EARTHING
100X50X6 MM GI CHANNEL FOR STRAIGHT CROSS ARM 1.2 MTR EACH 22 NO & 0.2 MTR LONG 22 NOS FOR 5 NOS OF CUT POINT & 1 NO OF TAPPING POINT
DISC INSULATOR(B&S) 70 KN POLYMER
HW FITTINGS (B&S) 70 KN 3 BOLTED
80SQMM AAA CONDUCTOR
PG CLAMP FOR 80 SQMM AAA CONDUCTOR
FISH PLATE 50X8 MM, 3.14 KG/MTR EACH .280 MTR LENGTH
11 KV V CROSS ARM 10.2 KG
GI BACK CLAMP FOR V CROSS ARM (0.85 KG)
11 KV F CLAMP 2.9 KG
11 KV PIN INSULATOR POLYMER
GI NUTS ,BOLTS, WASHER
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE(3 KG PER SUPPORT)
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
9 MTR LOG 300 KG PSC POLE
RCC BASE PLATE
EARTHING COLL SUPPORT
NO-8 GI WIRE (DIA 4.6MM) 0.131 KG/MTR -2 MTR FOR CONNECTING POLE WITH COIL EARTHING
TRANSFORMER MOUNTING BRACKET (65X65X6)MM SUITABLE FOR 16/10 KVA 11/.23 KV
AB SWITCH MOUNTING BRACKET (75X40X6)MM 6 MTR 6.8 KG/MTR
CANTILEVER FOR SUPPORTING AB SWITCH ARM 50X40X6 MM ANGLE 3.5 MTR LONG(4.5 KG/MTR)
HORNGAP FUSE MOUNTING CHANNEL (75X40X6)MM 2.2 MTR 6.8 KG/MTR
DISC INSULATOR (T&C) 45 KN 2 BOLTED
HARD WARE FITTINGS T&C TYPE 45KN (2 BOLTED)
11 KV AB SWITCH 2 POLE (200 AMP)
11 KV HG FUSE 2 POLE (200 AMP)
LIGHTNING ARRESTER(9 KV,10 KA)
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95 KG/MTR)
7/10 SWG STAY WIRE
GI PIPE EARTHING 40 MM DIA MEDIUM GAUGE 3 MTRS LONG
25X4 MM GI FLAT(NEUTRAL)
25X6 MM GI FLAT
55 SQMM AAAC
PG CLAMP FOR 55 SQMM AAA CONDUCTOR
FISH PLATE 50X8 MM ,3.14 KG/MTR EACH 2.8 MTR LENGTH
GI NUTS,BOLTS,WASHERS
LT DISTRIBUTION BOX FOR 16 KVA SUBSTATION
16 SQMM LT2 CORE PVC CABLE
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
GAURDING CROSS ARM OF 75X40X6 MM GI CHANNEL 1.8 MTR LONG 4 NOS @ 6.8 KG/MTR
EYE HOOK FOR CRADLE GUARD
NO-6,N0-8,NO-10 GI WIRE (DIA 4.8 MM) FOR GAURDING
25X6 MM GI FLAT FOR EARTHING 1.2 KG/MTR
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
40 MM NOMINAL BORE GI PIPE (MEDIUM GAUGE) EARTHING DEVICE WITH 3 MTR LONG
GI NUTS,BOLTS ,WASHER
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 9/8 MTR PSC POLE IN RATIO 1:1.5:3 =0.375 CUM @ 6648.85 =0.375X6648.85=RS 2493.32
CONCRETING OF 11 MTR WPB POLE IN RATIO 1:1.5:3 =0.45 CUM @ 6648.85 =0.45X6648.85=RS 2991.98
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
SUPPLY AND ERECTION OF GI FENCING WITH GATE AS PER STANDARD SPECIFICATIONS .PROVIDING AND FIXING GALVANIZE D STEEL CHAIN LINK FENCING WITH 75X75 MM MESH SIZE ,4.0 MM DIA MESH WIRECONFIRMING TO IS:2721,GI STRIP WIRE 2.5 MM DIA WITH TIE WIRE 6 MM DIA MILD GI STEEL INCLUDING PROVIDING 25X4.75 MM GI STRETCHER BARS.EYE BOLT STRAINERS.RING NUTS,HAIR PINS,STAPLESOF 3.5 MM WIRE,CLEATS OF GI ANGLE 75X60X6MM ,MS DROPPERS OF 25X4.75MM WITH 38X4.85MM HALF ROUND STAPLESETC. COMPLETED AS PER DRAWINGS AND SPECIFIED, AS DIRECTED.THE SCOPE INCLUDES SUPPLY OF FLAT ,ANGLE,CIVIL MATERIAL,CIVIL,EXCAVATION,CONCRETING,BRICK WORK,PAINTING,WELDING,TRANSPORTATION ETC.
MATERIALS AND MASSIONARY WORK FOR EARTH PIT,CAHRCOAL SALT ETC INCLUDING CONSTRUCTION OF EARTHING CHAMBER (SIZE 2"X2") AND RCC SLAB COVERING
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DIASMANTLING OF 11/0.4 KV ,33/0.4 KV THREE PHASE DISTRIBUTION TRANSFORMER 16 KVA INCLUDING REMOVAL OF HT/LT LEADS,EARTH SCOPE OF WORK ALSO INCLUDES LOADING TRANSPORTATION, UNLOADING AND STAKING AT A PROPER PLACE IN SAFE POSITION/SITE STORE
DISMANTLE STEEL STRUCTURE OF LINES AND SUBSTATION
DISMANTLING OF ACSR/AAAC 80/100 SQMM CONDUCTOR
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
SURVEY & DIGITIZATION OF NEW DSS AND ITSINTERNALS INCLUDING ATTRIBUTES
WPB 160x152,11 MTR LONG,30.44 KG/MTR 11 MTR WITH BASE PLATE
EARTHING OF SUPPORT (COIL TYPE)
NO-8 GI WIRE DIA 4.6 MM 0.131KG/MTR - 2MTR EACH POLE CONNECTING POLE WITH EARTHING
100X50X6 MM GI CHANNEL FOR STRAIGHT CROSS ARM 1.2 MTR EACH 22 NO & 0.2 MTR LONG 22 NOS FOR 5 NOS OF CUT POINT & 1 NO OF TAPPING POINT
DISC INSULATOR(B&S) 70 KN POLYMER
IPC FOR 100 SQMM AAA CONDUCTOR FOR COVERED CONDUCTOR
TENSION ASSEMBLY WEDGE TYPE WITH ANCHORING CLAMP FOR 11 KV COVERED CONDUCTOR
NON METALLIC TIES 11 KV FOR COVERED CONDUCTOR
11 KV XLPE COVERED CONDUCTOR 100 SQMM AAA
11 KV V CROSS ARM 10.2 KG
GI BACK CLAMP FOR V CROSS ARM (0.85 KG)
11 KV F CLAMP 2.9 KG
11 KV PIN INSULATOR POLYMER
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
GI NUTS ,BOLTS, WASHER
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE(3 KG PER SUPPORT)
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
GAURDING CROSS ARM OF 75X40X6 MM GI CHANNEL 1.8 MTR LONG 4 NOS @ 6.8 KG/MTR
EYE HOOK FOR CRADLE GUARD
NO-6,N0-8,NO-10 GI WIRE (DIA 4.8 MM) FOR GAURDING
25X6 MM GI FLAT FOR EARTHING 1.2 KG/MTR
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
40 MM NOMINAL BORE GI PIPE (MEDIUM GAUGE) EARTHING DEVICE WITH 3 MTR LONG
GI NUTS,BOLTS ,WASHER
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 11 MTR WPB POLE IN RATIO 1:1.5:3 =0.45 CUM @ 6648.85 =0.45X6648.85=RS 2991.98
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
MATERIALS AND MASSIONARY WORK FOR EARTH PIT,CAHRCOAL SALT ETC INCLUDING CONSTRUCTION OF EARTHING CHAMBER (SIZE 2"X2") AND RCC SLAB COVERING
DISMANTLING OF 9/11 MTRJOIST/WPB POLE116X100 MM (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DISMANTLE STEEL STRUCTURE OF LINES AND SUBSTATION
DISMANTLING OF ACSR/AAAC 80/100 SQMM CONDUCTOR FROM OVERHEAD LINE,RECOILING, LOADING,TRANSPORTATION UNLOADING AND STAAKING AT PROPER PLACE IN SAFE POSITION
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
WPB 160x152,11 MTR LONG,30.44 KG/MTR 11 MTR WITH BASE PLATE
EARTHING OF SUPPORT (COIL TYPE)
NO-8 GI WIRE DIA 4.6 MM 0.131KG/MTR - 2MTR EACH POLE CONNECTING POLE WITH EARTHING
TOP PRESSURE GI CHANNEL 100X50X6 MM EACH 2.8 MTR LONG 2 NOS 9.2 KG/MTR
GI CHANNEL FOR SUPPORTING DP ARM 75X40X6 MM 2.8 MTR LONG 2 NOS, 6.8 KG/MTR
BRACING ANGLE 50X50X6 MM GI ANGLE ,4 MTR LONG 2 NOS 4.5 KG/MTR
AB SWITCH MOUNTING CHANNEL GI 75X40X6 MM 2.8 MTR 2 NOS 6.8 KG/MTR
AB SWITCH SIDE SUPPORT CHANNEL 100X50X6 MM 9.2 KG/MTR EACH CHANNEL LENGTH .35 MTR 2 NOS CHANNEL REQUIRED
CHANNEL SUPPORT FOR DOWN PIPE 75X40X6 MM 6.8 KG/MTR EACH CHANNEL LENGTH .8 MTR 1 NO CHANNEL REQUIRED
11 KV AB SWITCH 3 POLE 400A
LIGHTNING ARRESTER 9 KV,10KA
DISC INSULATOR(B&S) 70 KN POLYMER
IPC FOR 100 SQMM AAA CONDUCTOR FOR COVERED CONDUCTOR
TENSION ASSEMBLY WEDGE TYPE WITH ANCHORING CLAMP FOR 11 KV COVERED CONDUCTOR
NON METALLIC TIES 11 KV FOR COVERED CONDUCTOR
11 KV PIN INSULATOR POLYMER
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
GI PIPE EARTHING 40 MM DIA MEDIUM GAUGE 3.25 MM THICKNESS 3 MTR LONG
GI FLAT 25X6MM
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE(3 KG PER SUPPORT)
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
GI NUTS,BOLTS ,WASHER
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
WPB 160x152,11 MTR LONG,30.44 KG/MTR 11 MTR WITH BASE PLATE
EARTHING OF SUPPORT (COIL TYPE)
NO-8 GI WIRE DIA 4.6 MM 0.131KG/MTR - 2MTR EACH POLE CONNECTING POLE WITH EARTHING
100X50X6 MM GI CHANNEL FOR STRAIGHT CROSS ARM 1.2 MTR EACH 22 NO & 0.2 MTR LONG 22 NOS FOR 5 NOS OF CUT POINT & 1 NO OF TAPPING POINT
DISC INSULATOR(B&S) 70 KN POLYMER
IPC FOR 100 SQMM AAA CONDUCTOR FOR COVERED CONDUCTOR
TENSION ASSEMBLY WEDGE TYPE WITH ANCHORING CLAMP FOR 11 KV COVERED CONDUCTOR
NON METALLIC TIES 11 KV FOR COVERED CONDUCTOR
MECHANICAL CONNECTOR WITH HEAT SHRINK SLEEV FOR 11 KV 100 SQMM AAA COVERED CONDUCTOR
11 KV XLPE COVERED CONDUCTOR 100 SQMM AAA
11 KV V CROSS ARM 10.2 KG
GI BACK CLAMP FOR V CROSS ARM .85 KG
11 KV F CLAMP2.9 KG
11 KV PIN INSULATOR POLYMER
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
GI NUTS ,BOLTS, WASHER
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE(3 KG PER SUPPORT)
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
GAURDING CROSS ARM OF 75X40X6 MM GI CHANNEL 1.8 MTR LONG 4 NOS @ 6.8 KG/MTR
EYE HOOK FOR CRADLE GUARD
NO-6,N0-8,NO-10 GI WIRE (DIA 4.8 MM) FOR GAURDING
25X6 MM GI FLAT FOR EARTHING 1.2 KG/MTR
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
40 MM NOMINAL BORE GI PIPE (MEDIUM GAUGE) EARTHING DEVICE WITH 3 MTR LONG
GI NUTS,BOLTS ,WASHER
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 11 MTR WPB POLE IN RATIO 1:1.5:3 =0.45 CUM @ 6648.85 =0.45X6648.85=RS 2991.98
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
MATERIALS AND MASSIONARY WORK FOR EARTH PIT,CAHRCOAL SALT ETC INCLUDING CONSTRUCTION OF EARTHING CHAMBER (SIZE 2"X2") AND RCC SLAB COVERING
DISMANTLING OF 9/11 MTRJOIST/WPB POLE116X100 MM (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DISMANTLE STEEL STRUCTURE OF LINES AND SUBSTATION
DISMANTLING OF ACSR/AAAC 80/100 SQMM CONDUCTOR FROM OVERHEAD LINE,RECOILING, LOADING,TRANSPORTATION UNLOADING AND STAAKING AT PROPER PLACE IN SAFE POSITION
DISMANTLING OF 11 KV/33 KV GO/AB SWITCH/ISOLATOR/DD FUSE/FUSE SET INCLUDING REMOVAL OF ALL ELECTRIC /EARTH CONNECTIONS, LOADING ,TRANSPORTATION, UNLOADING & STAKING AT PROPER PLACE IN SAFE POSITION/ BA SITE STORE (NOTE:SET=THREE PHASE)
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
WPB 160x152,11 MTR LONG,30.44 KG/MTR 11 MTR WITH BASE PLATE
EARTHING OF SUPPORT (COIL TYPE)
NO-8 GI WIRE DIA 4.6 MM 0.131KG/MTR - 2MTR EACH POLE CONNECTING POLE WITH EARTHING
100X50X6 MM GI CHANNEL FOR STRAIGHT CROSS ARM 1.2 MTR EACH 22 NO & 0.2 MTR LONG 22 NOS FOR 5 NOS OF CUT POINT & 1 NO OF TAPPING POINT
DISC INSULATOR(B&S) 70 KN POLYMER
IPC FOR 100 SQMM AAA CONDUCTOR FOR COVERED CONDUCTOR
TENSION ASSEMBLY WEDGE TYPE WITH ANCHORING CLAMP FOR 11 KV COVERED CONDUCTOR
NON METALLIC TIES 11 KV FOR COVERED CONDUCTOR
MECHANICAL CONNECTOR WITH HEAT SHRINK SLEEVE FOR 11 KV COVERED CONDUCTOR
11 KV XLPE COVERED CONDUCTOR 100 SQMM AAA
11 KV V CROSS ARM 10.2 KG
GI BACK CLAMP FOR V CROSS ARM (0.85 KG)
11 KV F CLAMP 2.9 KG
11 KV PIN INSULATOR POLYMER
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
GI NUTS ,BOLTS, WASHER
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE(3 KG PER SUPPORT)
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
WPB 160x152,11 MTR LONG,30.44 KG/MTR 11 MTR WITH BASE PLATE
EARTHING OF SUPPORT (COIL TYPE)
NO-8 GI WIRE DIA 4.6 MM 0.131KG/MTR - 2MTR EACH POLE CONNECTING POLE WITH EARTHING
TOP PRESSURE GI CHANNEL 100X50X6 MM EACH 2.8 MTR LONG 2 NOS 9.2 KG/MTR
TRANSFORMER MOUNTING GI CHANNEL100X50X6 MM EACH 2.8 MTR LONG 2 NOS @9.2 KG/MTR
AB SWITCH WITH HG FUSE MOUNTING GI CHANNEL75X40X6 MM 2.8 MTR LONG 4 NOS @6.8 KG/MTR
CANTILEVER GI CHANNEL FOR SUPPORTING AB SWITCH ARM 75X40X6 MM 1 MTR LONG 2 NOS @6.8 KG/MTR
CANTILEVER ANGLE FOR SUPPORTING AB SWITCH 50X50X6 MM GI ANGLE 1 MTR LONG 2 NOS @ 4.5 KG/MTR
TRANSFORMER BELTING GI ANGLE 50X50X6 MM 2.8 MTR LONG 2 NOS @4.5 KG/MTR WITH SIDE ANGLE TOTAL 7 MTR
ANGLE FOR MOUNTING LT DISTRIBUTION BOX 50X50X6 MM GI ANGLE 1 MTR EACH LONG 2 NOS @4.5 KG/MTR
AB SWITCH SIDE SUPPORT CHANNEL 100X50X6 MM 9.2 KG/MTR EACH CHANNEL LENGTH .35 MTR 2 NOS CHANNEL REQUIRED
CHANNEL SUPPORT FOR DOWN PIPE 75X40X6 MM 6.8 KG/MTR EACH CHANNEL LENGTH .8 MTR 1 NO CHANNEL REQUIRED
11 KV DISC INSULATOR(T&C) TYPE 45 KN POLYMER
TENSION ASSEMBLY WEDGE TYPE WITH ANCHORING CLAMP FOR 11 KV COVERED CONDUCTOR
AB SWITCH 11KV 200A 2 POLE 50 HZ
HG FUSE 11 KV 200A 2 POLE WITH PI
LIGHTNING ARRESTER 9 KV 10 KA
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
GI PIPE EARTHING 40 MM DIA MEDIUM GAUGE 3 MTRS LONG
25X4 MM GI FLAT (NEUTRAL)
25X6 MM GI FLAT
55 SQMM AAA CONDUCTOR
IPC FOR 100 SQMM AAA CONDUCTOR FOR COVERED CONDUCTOR
GI NUTS,BOLTS ,WASHER
25 KVA 11/0.4 KV (AL) TRANSFORMER BIS ENERGY LEVEL-II
LT DISTRIBUTION BOX WITH MCCB ALUMINIUM BUSBAR OF SINGLE BAY WITH KITKAT FUSE FOR 25 KVA S/S
1CX70 SQMM LT XLPE CABLE UNARMOURED 4 NOS 10 MTR EACH
DANGER BOARD
BACK CLAMP FOR DANGER PLATE 25X3 MM FLAT, 0.59 KG/MTR FLAT OF 0.510 MTR
GI BARBED WIRE ANTICLIMBING DEVICE(3 KG PER SUPPORT)
BACK CLAMP FOR BARBED WIRE ANTICLIMBING DEVICE 25X3 MM FLAT 0.59 KG/MTR FLAT OF 0.510 MTR LENGTH
BLACK PAINT
YELLOW COLOUR PAINT FOR BACKGROUND
SUNDRIES
GAURDING CROSS ARM OF 75X40X6 MM GI CHANNEL 1.8 MTR LONG 4 NOS @ 6.8 KG/MTR
EYE HOOK FOR CRADLE GUARD
NO-6,N0-8,NO-10 GI WIRE (DIA 4.8 MM) FOR GAURDING
25X6 MM GI FLAT FOR EARTHING 1.2 KG/MTR
HT STAY SET COMPLETE
HT STAY INSULATOR
HT STAY CLAMP(1.95KG/MTR)
7/10 SWG STAY WIRE
40 MM NOMINAL BORE GI PIPE (MEDIUM GAUGE) EARTHING DEVICE WITH 3 MTR LONG
GI NUTS,BOLTS ,WASHER
STAY CONCRETING IN RATIO 1:2:4 AS PER TPSODL SPECIFICATION AND DRAWING =0.2 CUM @6648.85=0.2X6648.85=RS.1329.77
CONCRETING OF 11 MTR WPB POLE IN RATIO 1:1.5:3 =0.45 CUM @ 6648.85 =0.45X6648.85=RS 2991.98
COUPING OF POLES IN RATI 1:1.5:3=0.1125 CUM @6648.85 =0.1125X6648.85=RS 748.00
MATERIALS AND MASSIONARY WORK FOR EARTH PIT,CAHRCOAL SALT ETC INCLUDING CONSTRUCTION OF EARTHING CHAMBER (SIZE 2"X2") AND RCC SLAB COVERING
CONSTRUCTION OF BOUNDARY WALLS BOUNDARY FOR FENCING OF DPM S/S IN THE SIZE OF 3X3 MTR @7300 .12 /RM CONSIDERING HEIGHT ABOVE THE GROUND LEVEL-1.65 MTR & BELOW GROUND DEPTH 1.2 MTR INCLUDING THE COST OF FABRICATION INSTALLATION OF MS GATE (1.5X1.65)
DISMANTLING OF 9/11 MTRJOIST/WPB POLE116X100 MM (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DISMANTLING OF 9/8 MTR PSC POLE (SERVICABLE POLE AFTER DIGGING THE PIT AND TAKING OUT THE POLE ,TRANSPORTATION AND STACKING THE POLE AT A PROPER PLACE IN SAFE POSITION WITH IN 10 KM /SITE STORE AND REFILLING THE PIT WITH LOOSE EARTH AND RAMMING INCLUDING REMOVAL AND DISPOSAL OF MALBA AT PROPER LOCATION AS PER INSTRUCTION OF EIC
DISMANTLING OF EXISTING 11/.4 KV 33/.4 KV THREE PHASE DISTRIBUTION TRANSFORMER 25 KVA INCLUDING REMOVAL OF HT/LT LEADS EARTH CONNECTIONS AND UNLOADING BY CRANE IF REQUIRED. SCOPE OF WORK ALSO INCLUDE LOADING,TRANSPORTATION,UNLOADING AND STAKING AT PROPER PLACE IN SAFE POSITION /SITE STORE.
DISMANTLE STEEL STRUCTURE OF LINES AND SUBSTATION
DISMANTLING OF ACSR/AAAC 80/100 SQMM CONDUCTOR FROM OVERHEAD LINE,RECOILING, LOADING,TRANSPORTATION UNLOADING AND STAAKING AT PROPER PLACE IN SAFE POSITION
SURVEY OF INCREMENTAL/DELTA NETWORK AND ASSETS CHANGES OF 11 KV & LT NETWORK AND UPDATION IN GESW DATABASE
SURVEY AND DIGITALIZATION OF NEW DSS AND ITS INTERNALS INCLUDING ATTRIBUTES N:B: Salvage value @ 8% to be dedcuted from the contractor's bill.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.47 MB
DTCN.pdf
Tender Documents • 1.87 MB
BOQ_578391.xls
BOQ • 0.79 MB
Download all tender documents and submit your bid