Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.6 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹13.7 L+₹1.7 L (14.2%)Rejected-AOC 58 CHANDRALOK BLDG MAYO HOSPITAL ROAD NAGPUR 440018 | NAGPUR | NAGPUR | MAHARASHTRA | 440018 | L2 | Rejected-AOC L2 BIDDER |
Tender Value
₹14.6 L
EMD Value
₹29,500
Closing Date
24 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Amla
GE (AF) Amla, Amla Depot Distt Betul (MP) 460553
SPL REPAIR OF LIGHTENING INFRASTRUCTURE (CERTAIN DBs) AND PROVISION OF CERTAIN MINOR WORKS AT AFS AMLA
2022_MES_560058_1
8507/E OF 2022-2023
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Amla
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE (AF) Amla
₹29,500
Yes
17 Dec 2022
27 Oct 2022
28 Nov 2022
27 Oct 2022
24 Nov 2022
10 Nov 2022
Amount
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.
M&L for moorum/ red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L for hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.
M&L for plain cement concrete 1:3:6 type C-1 using 20mm grated stone aggregate as in filling of pressed steel chowkhats etc., complete all as specified and directed.
M&L for plain cement concrete 1:4:8, Type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified as directed.
M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid) made using cement concrete 1:2:4 type B0 (12.5mm graded stone aggregate), set in cement mortar 1:4, including all mouldings but excluding frame (Pre cast frame shall be measured separately) complete all as specified and directed.
M&L for brick work with modular size fly ash bricks having minimum compressive strength of 75 kg/cm. sq, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for 100mm thick Plain Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floors, surface finished even and smooth without using extra cement, including necessary form work complete all as specified and directed.
M&L for 75 mm thick; PCC 1:3:6 type C2 using 40mm graded stone aggregate, as in plinth protection, surface finished even and smooth without using extra cement, including necessary form work complete all as specified and directed
S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 125mm long size extruded aluminium handles, cast type anodised complete all as specified and directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. using Fe-290 (Gde E-165) steel complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
S&F pressed steel frames having sectional size of 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified and directed.
S&F 30mm thick; Plain, framed, panelled shutters (any number of panels) made up of second-class hard wood, with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as specified and directed.
M&L for rendering 15 mm thick Cement Mortar 1:6 over brick or concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed.
M&L for for three coats of white wash on walls, pillasters, cornices, etc., on newly plastered walls including preparation of surfaces complete all as specified and directed.
S&F Three phase electronic meters temper proof LCD display with polycarbonate cover 415 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed.
Taking down existing roof / down conductor strips of any type and any description from wall/roof and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good to the disturbed surfaces to match the existing complete all as specified.
M & L for plate earthing in replacement of old earthing complete with Galvanised mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of equipment’s/ earthing test point etc., at the other end, earth strip encased in and including 40 mm GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25 x 4mm iron clamps, bolts, nuts and washer and also including providing watering pipe 20 mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with wire mesh funnel and earth pit in PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate and CI cover and frame complete all specified and shown in electrical plate No 3 of SSR Part-1 including testing earth resistance and submitting test report to AGE E/M by the contractor complete all as specified and directed. Note:- (i) Rates for excavation and earthwork in any kind of soil/strata, testing on completion, GI strip 32X6 mm and 40 mm dia light grade GI protection pipe upto 7.5 meters from earth plate is deemed to be included in the rate quoted. (ii) On testing after completion if less than 5 Ohm earth resistance is not obtained the earthing will be redone by the contractor at no extra cost to the department.
M & L for plate earthing in replacement of old earthing complete with copper earth plate electrode 60 cm x 60 cm x 3.15 mm thick buried directly in ground vertically (in earth pit not less than 2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including copper earth strip 20x3 mm bolted (with copper/brass nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of equipment’s earthing test point etc., at the other end, earth strip encased in and including 40 mm GI light grade pipe with all fittings from top of electrode to body of equipment fixed with and including 25x4mm iron clamps, bolts, nuts and washer and also including providing watering pipe 20 mm bore GI pipe medium grade from bottom of earth pit to top of electrode complete with wire mesh funnel and earth pit in PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate and CI cover and frame complete all specified and shown in electrical plate No 3 of SSR Part-1 including testing earth resistance and submitting test report to AGE E/M by the contractor complete all as specified and directed. Note: - (i) Rates for excavation and earthwork in any kind of soil/strata, testing on completion, copper strip 20x3 mm and 40 mm dia light grade GI protection pipe upto 7.5 meters from earth plate is deemed to be included in the rate quoted. (ii) On testing after completion if less than 5 Ohm earth resistance is not obtained the earthing will be redone by the contractor at no extra cost to the department.
M&L in replacement for test point terminal block made of gun metal or phosphorus bronze size 75 X 75 X 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexa head screw and connected to Copper/ Aluminium / GI strips complete housed in a PVC junction box all as specified and directed. Note : 1. The test points wil be properly fixed on epoxy insulators. 2. Epoxy insulators will be measured and paid seperately under relevant items.
S&F in replacement Air termination single pointed aluminium rod not less than 12mm dia and 300mm long end threaded all as specified and as directed.
M&L for fixing conductor fixed to wall on batten/porcelain/epoxy insulators or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc.connected upto test terminal point etc complete including fixing with saddles and screws for fixing porcelain/epoxy insulators/conduit/pipe , all as specified and directed for the following type of conductors :- Note : - Insulators/conduit/pipe shall be measured and paid separately under appropriate items here in after
a) Aluminium strip of size 25 x 4 mm
b) Copper strip of size 20 x 3 mm
c) Galvanised iron strip of size 25x4 mm
S&F in repairs Post insulator epoxy LV type suitable for aluminium/ GI strip 25 x 4 mm lightening conductor fixed on wall/roof/pole including screw, and taking out existing insulators complete all as specified and as directed.
S&F in repairs junction box IP 65 with plain walls of size 167mm x 125 mm x 82 mm made up of polystyrene having shutter and lifting knob with provision of earth strip entry glands fixed to wall or pole with nuts, bolts, washers and testing complete all as specified and directed. Make: - Hensel cat No K-8100 or equivalent in Neptune /Syntex
M&L for PCC block (300mm x 300mm x 300mm) 1:3:6 type C-1 (using 20 mm graded stone aggregate) with duly grouted MS bolt of suitable size to fix the Al strip with nut & washers for AL AT rod stand post on roof including necessary formwork complete all as specified and as directed.
Supply and fix Tubes, `light grade', galvanised 15 mm dia, with all fitting; laid in trenches complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying cables etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.
Returning filling in excavated soil including spreading levelling and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.
Removing surplus excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all as directed.
Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.
Paragon Electrotechnics
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .