Construction of 100 Beded Girl's Hostel Building at MS Piprahi in Sheohar District

BIHAR STATE EDUCATIONAL INFRASTRUCTURE CORPORATION LTD. SHIKSHA BHAWAN, SAIDPUR, PATNA Schedule Item Non Schedule Total

Boq For Construction of 100 Beded Girl's Hostel Building at MS Piprahi in Sheohar District ₹ 31,840,240.24 #REF! #REF!

Amount of B.O.Q. of Schedule Item (In Rs.) :- 31840240/- Amount of E.M.D. (In Rs.) :- 636800/-

Cost of B.O.Q. (In Rs.) :- Rs.10,000/-(Ten Thousand) Completion Period :- 12 Months

BASED ON BCD CIVIL SOR 2022 W.E.F. 01-01-2022, ELECTRICAL SOR W.E.F. 01-09-2023 AND RCD SOR W.E.F. 01-04-2025.

Sr. No. SOR Item No. Item of Work Qty. Unit Rate (Rs.) Amount (Rs.)

1 2.8.1 Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kinds of soil 459.88 cum ₹ 360.70 ₹ 165,877.99

2 2.29.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil. 2.95 100 sqm ₹ 1,355.40 ₹ 3,998.43

3 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 131.12 cum ₹ 123.90 ₹ 16,245.77

4 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 253.42 cum ₹ 287.30 ₹ 72,807.57

5 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work up to plinth level. 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 1.09 cum ₹ 3,434.00 ₹ 3,759.54

6 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work up to plinth level. 1:2:4 (1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 30.31 cum ₹ 3,998.10 ₹ 121,174.41

7 5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works up to plinth level Concrete of M-25 grade with minimum cement content of 330 kg/cum 208.70 cum ₹ 5,063.40 ₹ 1,056,706.26

8 5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All work above Plinth level up to floor V Level. Concrete of M-30 grade with minimum cement content of 350 kg/cum 327.30 cum ₹ 5,863.20 ₹ 1,919,051.89

9 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. 257.04 sqm ₹ 211.60 ₹ 54,389.66

10 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. 1,282.53 sqm ₹ 437.50 ₹ 561,104.69

11 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressummers and cantilevers. 1,424.96 sqm ₹ 404.70 ₹ 576,680.91

12 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts 782.54 sqm ₹ 494.40 ₹ 386,887.78

13 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for: Vertical and Horizontal fins individually or forming box louvers band, facias ane eaves boards. 4.94 sqm ₹ 646.70 ₹ 3,197.28

14 5.9.16.1 Centring and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls :Under 20 cm wide 190.83 m ₹ 130.20 ₹ 24,846.46

15 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for: Stairs (excluding landings) except spiral-staircases. 12.14 sqm ₹ 439.90 ₹ 5,342.15

16 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajja, corbels etc. including edges 73.68 sqm ₹ 550.90 ₹ 40,587.56

17 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand )-250 mm th brick work. 93.55 cum ₹ 4,819.90 ₹ 450,916.10

18 6.1.14A + 6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 278.32 cum ₹ 5,117.90 ₹ 1,424,398.57

19 6.18.4A + 6.19A Half brick masonry with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:4 (1 cement: 4 coarse sand) Extra for half Brick masonry in the superstructure above plinth level up to floor V level. 1,338.15 sqm ₹ 689.00 ₹ 921,982.59

20 6.21A Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks) 1,338.15 sqm ₹ 113.60 ₹ 152,013.39

21 13.12.2 Cement plaster in course sand 15 mm cement plaster of mix ; 1:4 (1 cement: 4 coarse sand) 1,180.21 sqm ₹ 176.40 ₹ 208,188.16

22 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand) 3,886.50 sqm ₹ 141.50 ₹ 549,939.71

23 13.24.2 6 mm cement plaster to ceiling of mix : 1:4 (1 cement: 4 coarse sand) 1,012.21 sqm ₹ 125.60 ₹ 127,132.95

24 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 115.33 sqm ₹ 686.80 ₹ 79,211.39

25 11.40 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours except white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete.Size of Tile 60x60 cm 552.82 sqm ₹ 1,414.00 ₹ 781,680.41

26 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm 855.83 sqm ₹ 1,638.80 ₹ 1,402,537.48

27 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement-based high polymer modified quick set tile adhesive (water-based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600 x 600 mm. 191.17 sqm ₹ 1,191.80 ₹ 227,830.45

28 11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 4.68 sqm ₹ 3,605.20 ₹ 16,872.34

29 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work 7.80 m ₹ 260.10 ₹ 2,028.78

30 11.3.1 Cement concrete flooring 1:2:4 (1 cement:2 coarse:sand:4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 7.76 sqm ₹ 289.10 ₹ 2,244.14

31 26.87.1 Providing and fixing factory made single extruded WPC {Wood Polymer Composite} solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N (Face) & 900N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. {Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick 177.35 sqm ₹ 3,866.50 ₹ 685,704.44

32 26.86.6 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). Frame size 65 x 125 mm 283.95 m 1,182.90 ₹ 335,884.46

33 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 300x16 mm 1.00 each ₹ 235.50 ₹ 235.50

34 9.96.2 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x16 mm 17.00 each ₹ 210.10 ₹ 3,571.70

35 9.97.1 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 300x10 mm 23.00 each ₹ 111.40 ₹ 2,562.20

36 9.97.4 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 150x10 mm 54.00 each ₹ 71.60 ₹ 3,866.40

37 9.101.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm 190.00 each ₹ 57.10 ₹ 10,849.00

38 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper 23.00 each ₹ 60.80 ₹ 1,398.40

39 10.12.1 Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or raw) plugs and screws or with fixing dips or with bolts and nuts as required, including providing and fixing of glass panes with glazing dips and special metal-sash putty pf approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required. 110.16 sqm ₹ 3,038.90 ₹ 334,765.22

40 9.48.1 Providing and fixing ISI M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete : Fixed to steel windows by welding. 110.16 m ₹ 144.50 ₹ 15,918.12

41 13.81.1 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on woodwork (hard and soft wood) 110.16 sqm ₹ 39.70 ₹ 4,373.35

42 13.81.3 Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works 110.16 sqm ₹ 34.60 ₹ 3,811.54

43 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 36.00 each ₹ 165.40 ₹ 5,954.40

44 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 8704.55 KG ₹ 94.50 ₹ 822,579.98

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 4807.35 KG ₹ 92.60 ₹ 445,160.61

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia. 11015.76 KG ₹ 90.80 ₹ 1,000,231.01

5.22.7D Thermo-Mechanically Treated bars TMTC-500-16mm dia. 21031.56 KG ₹ 91.70 ₹ 1,928,594.05

5.22.7E Thermo-Mechanically Treated bars TMTC-500-20mm dia. 23633.51 KG ₹ 91.70 ₹ 2,167,192.87

5.22.7F Thermo-Mechanically Treated bars TMTC-500-25mm dia. 4,005.25 KG ₹ 91.70 ₹ 367,281.63

45 10.36 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 360.00 kg ₹ 546.80 ₹ 196,848.00

46 13.93 1 Providing with synthetic enamel paint of approved brand and manufacture to give an Two or more coats on new work and taxes all complete as per building specification and direction of E/I 6,078.91 sqm ₹ 84.50 ₹ 513,667.87

47 13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 6,078.91 sqm ₹ 105.40 ₹ 640,717.08

48 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer

48 13.77.2 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats ) over and including priming coat with cement primer 4,898.70 sqm ₹ 102.30 ₹ 501,137.49

49 13.116 Forming groove of uniform size from 12 x 12 mm and upto 25 x 15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-charge. 60.00 m ₹ 47.10 ₹ 2,826.00

50 8.9/13.26 Neat Cement punning 1.35 m ₹ 40.50 ₹ 54.68

51 13.46.1 Finishing walls with Acrylic Smooth exterior paint of the required shade : New work (Two or more coats applied @ 1.67 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 1,180.21 sqm ₹ 137.00 ₹ 161,688.09

52 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 137.70 sqm ₹ 436.60 ₹ 60,119.82

53 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base the drain duly plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l 101.80 metre ₹ 1,087.90 ₹ 110,748.22

54 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. 6.00 each ₹ 189.40 ₹ 1,136.40

55 22.3 Providing and laying waterproofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand) mixed with water proofing compound in recommended proportion, (iii) 3rd course of applying blown or/residual bitumen applied hot at 1.7 kg. per sqm of area, (iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). 115.33 sqm ₹ 480.60 ₹ 55,427.60

56 12.52.2 Grading roof for water proofing treatment with Cement concrete 1:2:4(1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 10.00 m3 ₹ 3,932.20 ₹ 39,322.00

57 11.8 "Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavemerts etc." 150.00 m2 ₹ 36.30 ₹ 5,445.00

58 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 13.57 sq.m ₹ 283.30 ₹ 3,844.38

59 6.1A + 6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 8.75 cum ₹ 5,017.90 ₹ 43,906.63

60 13.17.1 13.26 + +13.36.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement Neat cement punning Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 52.82 sq.m. ₹ 253.10 ₹ 13,368.74

61 13.13.1 + 13.26 + 13.36.5 Cement plaster in course sand 20 mm cement plaster of mix 1:3 (1 cement: 3 coarse sand) Neat cement punning Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 16.65 sq.m. ₹ 280.90 ₹ 4,676.98

62 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work up to plinth level 0.93 cum ₹ 4,232.40 ₹ 3,936.13

63 Code no. of 1352 (i) C.I. cover and frame 300 x 300 mm inside 1.00 Each ₹ 480.00 ₹ 480.00

64 Code no. of 1621 (ii) S.C.I. plain bend 100 mm dia 1.00 Each ₹ 280.00 ₹ 280.00

65 Code no. of 7087 (iii) S.C.I. Tee 150 mm dia 1.00 Each ₹ 570.00 ₹ 570.00

Cost for Civil Works ₹ 21,859,770.78

ADD 6% GST BEYOND 12% (MULTIPLYING FACTOR - 0.0536) ₹ 1,171,683.71

Total Cost for Civil Works - A ₹ 23,031,454.50

66 CARRIAGE COST OF MATERIAL

(C) STONE CHIPS/ METAL 491.079 Cum ₹ 4,133.85 ₹ 2,030,046.40

67 Add Extra cost of material

68 SEIGNIORAGE FEES Rate @10 % for Material Cost

(A) COARSE SAND 495.422 Cum ₹ 17.58 ₹ 8,709.51

(C) STONE CHIPS/ METAL 491.079 Cum ₹ 59.54 ₹ 29,236.87

Carriage Cost of Materials ₹ 5,344,379.33

ADD 6% GST BEYOND 12% (MULTIPLYING FACTOR - 0.0536) ₹ 286,458.73

Total Cost for Carriage - B ₹ 5,630,838.06

C. WATER SUPPLY & SANITARY INSTALLATION WORK

69 18.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including, cutting and making good the walls etc. (internal work)

Exposed on walls

70 18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :

18.11.1 15mm dia nominal bore 160.00 Metre ₹ 318.90 ₹ 51,024.00

18.11.2 20mm dia nominal bore 140.00 Metre ₹ 374.00 ₹ 52,360.00

71 18.16 Providing and fixing brass stop cock of approved quality (screwed end).

18.16.1 15mm nominal bore 25.00 Each ₹ 303.80 ₹ 7,595.00

18.16.2 20mm nominal bore 20.00 Each ₹ 328.00 ₹ 6,560.00

72 18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end).

73 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end)

18.19.2.1 32mm nominal bore

Horizontal 25.00 Each ₹ 677.60 ₹ 16,940.00

74 18.21 Providing and fixing P V C connection pipe with brass unions.

18.21.2.1 45 cm length

15 mm nominal bore 25.00 Each ₹ 85.20 ₹ 2,130.00

75 18.22 Providing and fixing C.P. brass shower rose 15 or 20 mm inlet.

76 18.38 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :

18.38.1 15 mm diameter pipe 165.00 Metre ₹ 11.90 ₹ 1,963.50

18.38.2 20 mm diamatre pipe 160.00 Metre ₹ 13.90 ₹ 2,224.00

18.38.3 25 mm diametre pipe 150.00 Metre ₹ 18.40 ₹ 2,760.00

18.38.4 32 mm diametre pipe 350.00 Metre ₹ 21.60 ₹ 7,560.00

18.38.5 40 mm diamatre pipe 95.00 Metre ₹ 25.70 ₹ 2,441.50

77 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc.complete (new work)

78 18.49 Providing and fixing C.P. brass,bib cock of approved quality conforming to IS : 8931 10.00 Each ₹ 434.20 ₹ 4,342.00

79 18.5 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS stamdards and weighing notless than 810 gms.

80 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS stamdards and weighing notless than 690 gms.

81 18.52 Providing and fixing C.P brass stop cock (concealed) of standard design and of approved mark conforming to IS:8931

18.52.1 15mm nominal bore 10.00 Each ₹ 594.80 ₹ 5,948.00

18.53.1 15mm nominal bore 15.00 Each ₹ 500.40 ₹ 7,506.00

82 18.65 Providing and fixing PTMT Soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 15.00 Each ₹ 96.80 ₹ 1,452.00

83 18.76 Cutting holes up to 30 x 30 cm in walls including making good the same:

18.76.1 With common burnt clay F.P.S. (non modular) bricks 25.00 Each ₹ 198.50 ₹ 4,962.50

84 18.79 Making holes up to 20 x 20 cm and embedding pipes upto 150 mm in diametre in masonary and filling with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) including dispopsal of malba. 25.00 Each ₹ 115.70 ₹ 2,892.50

85 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 25.00 Each ₹ 2,764.40 ₹ 69,110.00

86 17.28 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.

17.28.2.2 Flexible pipe 40 MM Dia 10.00 Each ₹ 104.40 ₹ 1,044.00

87 17.31 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comelete. 10.00 Each ₹ 1,068.50 ₹ 10,685.00

88 17.33 Providing and fixing 600 x 120 x 5 mm glass shelf with edges rounded off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete 20.00 Each ₹ 713.30 ₹ 14,266.00

89 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm an effective height of 88 mm, weighthan 190 gms 15.00 Each ₹ 424.00 ₹ 6,360.00

90 12.78 Providing and fixing on wall face unplasticised PVC (working pressure 4 kg per sqcm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

91 12.79 Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised-PVC rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

12.79.2.2 Single pushfit Coupler: 110 mm 10.00 Each ₹ 374.50 ₹ 3,745.00

12.79.3.2 Single tee with door 110 x110x100 mm 10.00 Each ₹ 193.40 ₹ 1,934.00

92 12.80 Providing and fixing unplasticised-PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S screws or required length including cutting brick work and fixing on cement mortar (1:4) 1 cement:4 coarse sand and making good the wall etc. complete.

93 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

17.1.1 White Vitreous china Orissa Pattern W.C pan of size 580x440mm with integral type foot rests. 10.00 Each ₹ 4,470.90 ₹ 44,709.00

94 17.2 Providing and fixing white vitreous china pedastal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

17.2.1 W.C pan with ISI marked white solid plastic seat and lid. 5.00 Each ₹ 4,230.00 ₹ 21,150.00

95 17.10 Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.

17.10.1.1 Kitchen sink with drain board

96 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105gms. 10.00 Each ₹ 146.30 ₹ 1,463.00

97 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 4,000.00 P/L ₹ 9.70 ₹ 38,800.00

98 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distances of 37mm fromwall face with concealed fittings arrangement of approved quality, colour and make weighing not less than 90 gms. 10.00 Each ₹ 204.70 ₹ 2,047.00

99 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes inlcuding bed concrete as per standard design.

19.2.2 150mm diameter S.W. pipe 85.00 Metre ₹ 494.40 ₹ 42,024.00

100 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1.00 Each ₹ 33,603.40 ₹ 33,603.40

101 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :

19.4.3.1 180x150 mm size P type

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 7.00 Each ₹ 1,994.10 ₹ 13,958.70

102 19.30.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mmthick with cement mortar 1:3 (1 cement : 3 coarse sand), finishedsmooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design

19.30.1.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 10.00 Each ₹ 4,266.80 ₹ 42,668.00

Total Plumbing Cost Schedule Item ₹ 935,538.90

ADD 6% GST BEYOND 12% (MULTIPLYING FACTOR - 0.0536) ₹ 50,144.89

Total Plumbing Cost Schedule Item C ₹ 985,683.79

103 24.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 Metre depth below ground level.

104 24.3 Supplying, assembling, lowering and fixing in vertical positionin bore well, unplasticized PVC medium well casing (CM) pipeof required dia, conforming to IS: 12818, including required hireand labour charges, fittings & accessories etc. allcomplete, for all depths,as per direction of Engineer -in-charge

24.3.1 100 mm nominal size dia 60.00 Meter ₹ 546.10 ₹ 32,766.00

24.3.2 150 mm nominal size dia 30.00 Meter ₹ 660.10 ₹ 19,803.00

105 24.4 Supplying, assembling, lowering and fixing in vertical positionin bore well unplasticized PVC medium well screen (RMS) pipeswith ribs, conforming to IS: 12818, including hire & labourcharges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

24.4.1 100 mm nominal size dia 6.00 Meter ₹ 573.10 ₹ 3,438.60

106 24.8 Gravel packing in tubewell construction in accordance with IS:4097,including providing gravel fine/ medium/ coarse, inrequired grading & sizes as per actual requirement, all complete as per direction of Engineer 3.00 M3 ₹ 1,343.20 ₹ 4,029.60

107 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 10.00 ₹ 916.80 ₹ 9,168.00

108 24.13 Providing and fixing suitable size threaded mild steel cap orspot welded plate to the top of bore well housing/ casing pipe,removable as per requirement, all complete for borewell of:

109 24.14 Providing and fixing M.S. clamp of required dia to the top ofcasing/ housing pipe of tubewell as per IS: 2800 (part I),including necessary bolts & nuts of required size complete

110 24.2 Providing and fixing Bail plug/ Bottom plug of required dia tothe bottom of pipe assembly of tubewell as per IS:2800 (part I).

111 Supply Installation , commissioning and testing of single phase 2 H.P submersible pump set having discharging capacity 3.35 lps at a total head of 35 meter (approx) of KSB/Kirloskar or equivalent make with all accessories 7 fitting etc including loading unloading and transpotation of the pump set to the work site with all req. labour materials,tools and tackles installation,testing & commissioning as per standards specifications and direction of E/I 1.00 Each ₹ 30,500.00 ₹ 30,500.00

Total Boring Cost Schedule Item ₹ 158,772.20

ADD 6% GST BEYOND 12% (MULTIPLYING FACTOR - 0.0536) ₹ 8,510.19

Total Boring Cost Schedule Item D ₹ 167,282.39

D. ELECTRIFICATION WORKS

112 1.3 Wiring for light point /fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, phenolic laminated sheet, suitable size M.S. / PVC. box etc as required.

113 1.4 Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI. Box and earthing the point with 1.5 sq. mm. FR PVC insulated copper conductor single core cable etc as required. 6.00 Nos. ₹ 1,248.00 ₹ 7,488.00

114 1.5 Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 350.00 mtr. ₹ 309.00 ₹ 108,150.00

115 1.7 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

116 1.16 Supplying and drawing following pair 0.5 sq.mm. FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

117 1.17 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required. 100.00 mtr. ₹ 42.00 ₹ 4,200.00

118 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

119 1.24 Supplying and fixing following modular o switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet. 60.00 Each ₹ 112.00 ₹ 6,720.00

120 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet 5.00 Each ₹ 131.00 ₹ 655.00

121 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.7 TV antenna socket outlet 2.00 Each ₹ 131.00 ₹ 262.00

122 1.31 Supplying and fixing suitable size Gl box with modular plateproviding and fixing 3 pin 5/6 amps modular socket outletand 5/6 amps modular switch, connection etc. as required. 100.00 Each ₹ 414.00 ₹ 41,400.00

123 1.32 Supplying and fixing suitable size Gl box with modular plateand cover in front on surface or in recess includingproviding and fixing 6 pin 5/6 & 15/16 amps modular socketoutlet and 15/16 amps modular switch, connection etc. as req uired. 70.00 Nos. ₹ 531.00 ₹ 37,170.00

124 2.9 Supplying and fixing following way horizontal type three pole and neutral sheet steel ,MCB distribution board 415 volts on surface recess,complete with tinned copper bus bar,netural bus bar earth bar dinbar interconnections,powder painted including earthing etc as requried (But without MCB/RCCB/Isolator) 6way (4+18) double door.

125 3.6 Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. 2.00 Set ₹ 13,721.00 ₹ 27,442.00

125 4.5 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface or wall for lighting conductor complete as required, (For horizontal run) 120.00 mtr. ₹ 516.00 ₹ 61,920.00

126 4.6 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface or wall for lighting conductor complete as required, (For vertical run) 20.00 mtr. ₹ 559.00 ₹ 11,180.00

127 8.17.1 Supply and installation of 300 mm, 230 v A.C. exhaustfan in the existing opening including making good thedamage, connection testing, commissioning etc asrequired. 20.00 each ₹ 2,572.00 ₹ 51,440.00

128 8.15 Supply and installation of regular/standard model A.C.ceiling fan of 1200 mm sweep including wiring thedown rods of standard length (upto 30 cm) with 1.5 sq. 100.00 Each ₹ 2,482.00 ₹ 248,200.00

129 5.3. Supplying and fixing 4'X20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc directly on walll ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. (For Non-residential building) 100.00 Each ₹ 762.00 ₹ 76,200.00

130 5.15.4 Supplying and fixing fotrlowing types LED Flood light withminimum efficacy 100 lm/w in die cast aluminium housing,toughened glass, lP 66 protection and complete withelectronic driver etc on poleibuilding including connection earthing the body etc as required. 100wt 12.00 Each ₹ 6,085.00 ₹ 73,020.00

130 6.1 Supplying and fixing of following types lamp in theexisting electrical fitting/ fixtures etc. as required.

131 1.7 Wiring for circuit/ submain wiring alongwith earth wirewith the following sizes of FR PVC insulated copperconductor, single core cable in surface/ recessedmedium class PVC conduit as required.

132 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

7.1.2 .Above 35 sq. mm and upto 95 sq. mm 100.00 mtr. ₹ 326.00 ₹ 32,600.00

133 4.1 Providing and fixing lighting conductor finial,made of 25mm dia 300 mm long ,copper tube having single prong at top ,with 85mm dia 3mm thick copper base plate including holes etc 5.00 Each ₹ 1,056.00 ₹ 5,280.00

134 2211 3.5 core, 150 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium cond uctor 100.00 mtr. ₹ 1,322.60 ₹ 132,260.00

135 2.12.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breakersuitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.Single pole 120.00 set ₹ 237.00 ₹ 28,440.00

136 2.16.1 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps 12.00 set ₹ 967.00 ₹ 11,604.00

2.16.2 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps 12.00 each ₹ 1,035.00 ₹ 12,420.00

137 1.33 Supplying and fixing 2 pin ,6 amp celling rose on the existing junction box/wooden block including connection etc as requried 100.00 each ₹ 64.00 ₹ 6,400.00

138 1.34 Supplying and fixing brass batten/angle holder including connection etc.as required 60.00 each ₹ 80.00 ₹ 4,800.00

139 2.4 Providing and fixing following rating and breaking capacityand pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required

140 2.5 Providing and fixing following capacity busbar chamberwith 4 strips of suitable size made of copper, heavy duty,complete with all accessories including connections, earthing the body etc. as required.

141 2.60 Providing and fixing following capacity double pole/ fourpole OFF-load changeover switches with side handleoperation, in sheet enclosure in existing metal board,including drilling holes in metal panel, making connections etc. as required.

142 1605 63 amps. TPN switch disconnector fuse unit, 12.00 Each ₹ 4,395.00 ₹ 52,740.00

143 1604 32 amps. TPN switch disconnectorfuse unit, rewireable 18.00 Each ₹ 2,033.00 ₹ 36,594.00

144 Approved Rate supplaying and fixing wall /floor mounted cubical board fabrication with 18 guage iron sheet suitable for panel mounted switch discoonecto including bus bar chamber insulator nut boult indicator switch amper digital ct coil voltmeter digital 10.00 sqft ₹ 1,050.00 ₹ 10,500.00

145 2.12 Supptying and fixing following rating, 24Al4L5 volts, "C"curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DBcomplete withconnections, testing and commissioning etc. as required'

146 DGS&D Brand new ISI marked Life Guard ABC type multipurpose Fire Extinguishers 4 Kgs. Capacity, fitted with pressure guage complete in all respects, ready to use, complete installation kit. 10.00 Each ₹ 7,549.75 ₹ 75,497.50

Total Electrical Works Cost - E ₹ 2,024,981.50

Total Cost Schedule Items - (A+B+C+D+E) ₹ 31,840,240.24

Total Cost Schedule Items: Say, ₹ 31,840,240.00

Junior Engineer Assistant Engineer Executive Engineer

BIHAR STATE EDUCATIONAL INFRASTRUCTURE CORPORATION LTD. SHIKSHA BHAWAN, SAIDPUR, PATNA Schedule Item Non Schedule Total

Boq For Construction of 100 Beded Girl's Hostel Building at MS Piprahi in Sheohar District ₹ 31,840,240.24 #REF! #REF!

Amount of B.O.Q. of Schedule Item (In Rs.) :- 31840240/- Amount of E.M.D. (In Rs.) :- 636800/-

Cost of B.O.Q. (In Rs.) :- Rs.10,000/-(Ten Thousand) Completion Period :- 12 Months

BASED ON BCD CIVIL SOR 2022 W.E.F. 01-01-2022, ELECTRICAL SOR W.E.F. 01-09-2023 AND RCD SOR W.E.F. 01-04-2025.

Sr. No. SOR Item No. Item of Work Qty. Unit Rate (Rs.) Amount (Rs.)

1 2.8.1 Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All Kinds of soil 459.88 cum ₹ 360.70 ₹ 165,877.99

2 2.29.1 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil. 2.95 100 sqm ₹ 1,355.40 ₹ 3,998.43

3 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 131.12 cum ₹ 123.90 ₹ 16,245.77

4 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 253.42 cum ₹ 287.30 ₹ 72,807.57

5 4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work up to plinth level. 1:3:6 (1 Cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 1.09 cum ₹ 3,434.00 ₹ 3,759.54

6 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work up to plinth level. 1:2:4 (1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 30.31 cum ₹ 3,998.10 ₹ 121,174.41

7 5.33.1.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works up to plinth level Concrete of M-25 grade with minimum cement content of 330 kg/cum 208.70 cum ₹ 5,063.40 ₹ 1,056,706.26

8 5.33.2.1 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All work above Plinth level up to floor V Level. Concrete of M-30 grade with minimum cement content of 350 kg/cum 327.30 cum ₹ 5,863.20 ₹ 1,919,051.89

9 5.9.1 Centring and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. 257.04 sqm ₹ 211.60 ₹ 54,389.66

10 5.9.3 Centring and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. 1,282.53 sqm ₹ 437.50 ₹ 561,104.69

11 5.9.5 Centring and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressummers and cantilevers. 1,424.96 sqm ₹ 404.70 ₹ 576,680.91

12 5.9.6 Centring and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts 782.54 sqm ₹ 494.40 ₹ 386,887.78

13 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for: Vertical and Horizontal fins individually or forming box louvers band, facias ane eaves boards. 4.94 sqm ₹ 646.70 ₹ 3,197.28

14 5.9.16.1 Centring and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls :Under 20 cm wide 190.83 m ₹ 130.20 ₹ 24,846.46

15 5.9.7 Centring and shuttering including strutting, propping etc. and removal of form for: Stairs (excluding landings) except spiral-staircases. 12.14 sqm ₹ 439.90 ₹ 5,342.15

16 5.9.19 Centring and shuttering including strutting, propping etc. and removal of form for: Weather shade, Chajja, corbels etc. including edges 73.68 sqm ₹ 550.90 ₹ 40,587.56

17 6.1.14A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand )-250 mm th brick work. 93.55 cum ₹ 4,819.90 ₹ 450,916.10

18 6.1.14A + 6.3A Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 278.32 cum ₹ 5,117.90 ₹ 1,424,398.57

19 6.18.4A + 6.19A Half brick masonry with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:4 (1 cement: 4 coarse sand) Extra for half Brick masonry in the superstructure above plinth level up to floor V level. 1,338.15 sqm ₹ 689.00 ₹ 921,982.59

20 6.21A Extra for providing and placing in position 2 Nos, 6 mm dia , MS bars at every third course of half brick masonry (with F. P. S. bricks) 1,338.15 sqm ₹ 113.60 ₹ 152,013.39

21 13.12.2 Cement plaster in course sand 15 mm cement plaster of mix ; 1:4 (1 cement: 4 coarse sand) 1,180.21 sqm ₹ 176.40 ₹ 208,188.16

22 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand) 3,886.50 sqm ₹ 141.50 ₹ 549,939.71

23 13.24.2 6 mm cement plaster to ceiling of mix : 1:4 (1 cement: 4 coarse sand) 1,012.21 sqm ₹ 125.60 ₹ 127,132.95

24 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 115.33 sqm ₹ 686.80 ₹ 79,211.39

25 11.40 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours except white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete.Size of Tile 60x60 cm 552.82 sqm ₹ 1,414.00 ₹ 781,680.41

26 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. Size of Tile 60x60 cm 855.83 sqm ₹ 1,638.80 ₹ 1,402,537.48

27 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement-based high polymer modified quick set tile adhesive (water-based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600 x 600 mm. 191.17 sqm ₹ 1,191.80 ₹ 227,830.45

28 11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete asper the architectural drawings with 18 mm thick stone slab over 20 mm (average)thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 4.68 sqm ₹ 3,605.20 ₹ 16,872.34

29 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work 7.80 m ₹ 260.10 ₹ 2,028.78

30 11.3.1 Cement concrete flooring 1:2:4 (1 cement:2 coarse:sand:4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate 7.76 sqm ₹ 289.10 ₹ 2,244.14

31 26.87.1 Providing and fixing factory made single extruded WPC {Wood Polymer Composite} solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N (Face) & 900N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. {Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick 177.35 sqm ₹ 3,866.50 ₹ 685,704.44

32 26.86.6 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately). Frame size 65 x 125 mm 283.95 m 1,182.90 ₹ 335,884.46

33 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 300x16 mm 1.00 each ₹ 235.50 ₹ 235.50

34 9.96.2 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 250x16 mm 17.00 each ₹ 210.10 ₹ 3,571.70

35 9.97.1 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 300x10 mm 23.00 each ₹ 111.40 ₹ 2,562.20

36 9.97.4 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 150x10 mm 54.00 each ₹ 71.60 ₹ 3,866.40

37 9.101.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm 190.00 each ₹ 57.10 ₹ 10,849.00

38 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper 23.00 each ₹ 60.80 ₹ 1,398.40

39 10.12.1 Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or raw) plugs and screws or with fixing dips or with bolts and nuts as required, including providing and fixing of glass panes with glazing dips and special metal-sash putty pf approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required. 110.16 sqm ₹ 3,038.90 ₹ 334,765.22

40 9.48.1 Providing and fixing ISI M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete : Fixed to steel windows by welding. 110.16 m ₹ 144.50 ₹ 15,918.12

41 13.81.1 Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on woodwork (hard and soft wood) 110.16 sqm ₹ 39.70 ₹ 4,373.35

42 13.81.3 Applying priming coat: With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works 110.16 sqm ₹ 34.60 ₹ 3,811.54

43 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 36.00 each ₹ 165.40 ₹ 5,954.40

44 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 8704.55 KG ₹ 94.50 ₹ 822,579.98

5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 4807.35 KG ₹ 92.60 ₹ 445,160.61

5.22.7C Thermo-Mechanically Treated bars TMTC-500-12mm dia. 11015.76 KG ₹ 90.80 ₹ 1,000,231.01

5.22.7D Thermo-Mechanically Treated bars TMTC-500-16mm dia. 21031.56 KG ₹ 91.70 ₹ 1,928,594.05

5.22.7E Thermo-Mechanically Treated bars TMTC-500-20mm dia. 23633.51 KG ₹ 91.70 ₹ 2,167,192.87

5.22.7F Thermo-Mechanically Treated bars TMTC-500-25mm dia. 4,005.25 KG ₹ 91.70 ₹ 367,281.63

45 10.36 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 360.00 kg ₹ 546.80 ₹ 196,848.00

46 13.93 1 Providing with synthetic enamel paint of approved brand and manufacture to give an Two or more coats on new work and taxes all complete as per building specification and direction of E/I 6,078.91 sqm ₹ 84.50 ₹ 513,667.87

47 13.80 A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 6,078.91 sqm ₹ 105.40 ₹ 640,717.08

48 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer

48 13.77.2 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats ) over and including priming coat with cement primer 4,898.70 sqm ₹ 102.30 ₹ 501,137.49

49 13.116 Forming groove of uniform size from 12 x 12 mm and upto 25 x 15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-charge. 60.00 m ₹ 47.10 ₹ 2,826.00

50 8.9/13.26 Neat Cement punning 1.35 m ₹ 40.50 ₹ 54.68

51 13.46.1 Finishing walls with Acrylic Smooth exterior paint of the required shade : New work (Two or more coats applied @ 1.67 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 1,180.21 sqm ₹ 137.00 ₹ 161,688.09

52 4.17 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth. 137.70 sqm ₹ 436.60 ₹ 60,119.82

53 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base the drain duly plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l 101.80 metre ₹ 1,087.90 ₹ 110,748.22

54 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete. 6.00 each ₹ 189.40 ₹ 1,136.40

55 22.3 Providing and laying waterproofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming tc IS 2645 in recommended proportions. (ii) 2nd course of 20 mm cement plaster 1:3 (1 cement:3 coarse sand) mixed with water proofing compound in recommended proportion, (iii) 3rd course of applying blown or/residual bitumen applied hot at 1.7 kg. per sqm of area, (iv) 4th course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqni). 115.33 sqm ₹ 480.60 ₹ 55,427.60

56 12.52.2 Grading roof for water proofing treatment with Cement concrete 1:2:4(1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 10.00 m3 ₹ 3,932.20 ₹ 39,322.00

57 11.8 "Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavemerts etc." 150.00 m2 ₹ 36.30 ₹ 5,445.00

58 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 13.57 sq.m ₹ 283.30 ₹ 3,844.38

59 6.1A + 6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 8.75 cum ₹ 5,017.90 ₹ 43,906.63

60 13.17.1 13.26 + +13.36.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement Neat cement punning Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 52.82 sq.m. ₹ 253.10 ₹ 13,368.74

61 13.13.1 + 13.26 + 13.36.5 Cement plaster in course sand 20 mm cement plaster of mix 1:3 (1 cement: 3 coarse sand) Neat cement punning Extra for providing and mixing water proofing material in proportion recommended by the manufacturers: 16.65 sq.m. ₹ 280.90 ₹ 4,676.98

62 5.1.3 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement-All work up to plinth level 0.93 cum ₹ 4,232.40 ₹ 3,936.13

63 Code no. of 1352 (i) C.I. cover and frame 300 x 300 mm inside 1.00 Each ₹ 480.00 ₹ 480.00

64 Code no. of 1621 (ii) S.C.I. plain bend 100 mm dia 1.00 Each ₹ 280.00 ₹ 280.00

65 Code no. of 7087 (iii) S.C.I. Tee 150 mm dia 1.00 Each ₹ 570.00 ₹ 570.00

Cost for Civil Works ₹ 21,859,770.78

ADD 6% GST BEYOND 12% (MULTIPLYING FACTOR - 0.0536) ₹ 1,171,683.71

Total Cost for Civil Works - A ₹ 23,031,454.50

66 CARRIAGE COST OF MATERIAL

(C) STONE CHIPS/ METAL 491.079 Cum ₹ 4,133.85 ₹ 2,030,046.40

67 Add Extra cost of material

68 SEIGNIORAGE FEES Rate @10 % for Material Cost

(A) COARSE SAND 495.422 Cum ₹ 17.58 ₹ 8,709.51

(C) STONE CHIPS/ METAL 491.079 Cum ₹ 59.54 ₹ 29,236.87

Carriage Cost of Materials ₹ 5,344,379.33

ADD 6% GST BEYOND 12% (MULTIPLYING FACTOR - 0.0536) ₹ 286,458.73

Total Cost for Carriage - B ₹ 5,630,838.06

C. WATER SUPPLY & SANITARY INSTALLATION WORK

69 18.1 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including, cutting and making good the walls etc. (internal work)

Exposed on walls

70 18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :

18.11.1 15mm dia nominal bore 160.00 Metre ₹ 318.90 ₹ 51,024.00

18.11.2 20mm dia nominal bore 140.00 Metre ₹ 374.00 ₹ 52,360.00

71 18.16 Providing and fixing brass stop cock of approved quality (screwed end).

18.16.1 15mm nominal bore 25.00 Each ₹ 303.80 ₹ 7,595.00

18.16.2 20mm nominal bore 20.00 Each ₹ 328.00 ₹ 6,560.00

72 18.17 Providing and fixing brass gate valve with C.I. wheel of approved quality (screwed end).

73 18.19 Providing and fixing gun metal non-return valve of approved quality (screwed end)

18.19.2.1 32mm nominal bore

Horizontal 25.00 Each ₹ 677.60 ₹ 16,940.00

74 18.21 Providing and fixing P V C connection pipe with brass unions.

18.21.2.1 45 cm length

15 mm nominal bore 25.00 Each ₹ 85.20 ₹ 2,130.00

75 18.22 Providing and fixing C.P. brass shower rose 15 or 20 mm inlet.

76 18.38 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work :

18.38.1 15 mm diameter pipe 165.00 Metre ₹ 11.90 ₹ 1,963.50

18.38.2 20 mm diamatre pipe 160.00 Metre ₹ 13.90 ₹ 2,224.00

18.38.3 25 mm diametre pipe 150.00 Metre ₹ 18.40 ₹ 2,760.00

18.38.4 32 mm diametre pipe 350.00 Metre ₹ 21.60 ₹ 7,560.00

18.38.5 40 mm diamatre pipe 95.00 Metre ₹ 25.70 ₹ 2,441.50

77 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc.complete (new work)

78 18.49 Providing and fixing C.P. brass,bib cock of approved quality conforming to IS : 8931 10.00 Each ₹ 434.20 ₹ 4,342.00

79 18.5 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS stamdards and weighing notless than 810 gms.

80 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS stamdards and weighing notless than 690 gms.

81 18.52 Providing and fixing C.P brass stop cock (concealed) of standard design and of approved mark conforming to IS:8931

18.52.1 15mm nominal bore 10.00 Each ₹ 594.80 ₹ 5,948.00

18.53.1 15mm nominal bore 15.00 Each ₹ 500.40 ₹ 7,506.00

82 18.65 Providing and fixing PTMT Soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. 15.00 Each ₹ 96.80 ₹ 1,452.00

83 18.76 Cutting holes up to 30 x 30 cm in walls including making good the same:

18.76.1 With common burnt clay F.P.S. (non modular) bricks 25.00 Each ₹ 198.50 ₹ 4,962.50

84 18.79 Making holes up to 20 x 20 cm and embedding pipes upto 150 mm in diametre in masonary and filling with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) including dispopsal of malba. 25.00 Each ₹ 115.70 ₹ 2,892.50

85 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 25.00 Each ₹ 2,764.40 ₹ 69,110.00

86 17.28 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.

17.28.2.2 Flexible pipe 40 MM Dia 10.00 Each ₹ 104.40 ₹ 1,044.00

87 17.31 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comelete. 10.00 Each ₹ 1,068.50 ₹ 10,685.00

88 17.33 Providing and fixing 600 x 120 x 5 mm glass shelf with edges rounded off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete 20.00 Each ₹ 713.30 ₹ 14,266.00

89 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm an effective height of 88 mm, weighthan 190 gms 15.00 Each ₹ 424.00 ₹ 6,360.00

90 12.78 Providing and fixing on wall face unplasticised PVC (working pressure 4 kg per sqcm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

91 12.79 Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised-PVC rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

12.79.2.2 Single pushfit Coupler: 110 mm 10.00 Each ₹ 374.50 ₹ 3,745.00

12.79.3.2 Single tee with door 110 x110x100 mm 10.00 Each ₹ 193.40 ₹ 1,934.00

92 12.80 Providing and fixing unplasticised-PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S screws or required length including cutting brick work and fixing on cement mortar (1:4) 1 cement:4 coarse sand and making good the wall etc. complete.

93 17.1 Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

17.1.1 White Vitreous china Orissa Pattern W.C pan of size 580x440mm with integral type foot rests. 10.00 Each ₹ 4,470.90 ₹ 44,709.00

94 17.2 Providing and fixing white vitreous china pedastal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.

17.2.1 W.C pan with ISI marked white solid plastic seat and lid. 5.00 Each ₹ 4,230.00 ₹ 21,150.00

95 17.10 Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.

17.10.1.1 Kitchen sink with drain board

96 17.71 Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less than 105gms. 10.00 Each ₹ 146.30 ₹ 1,463.00

97 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 4,000.00 P/L ₹ 9.70 ₹ 38,800.00

98 17.72 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distances of 37mm fromwall face with concealed fittings arrangement of approved quality, colour and make weighing not less than 90 gms. 10.00 Each ₹ 204.70 ₹ 2,047.00

99 19.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround S.W. pipes inlcuding bed concrete as per standard design.

19.2.2 150mm diameter S.W. pipe 85.00 Metre ₹ 494.40 ₹ 42,024.00

100 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 1.00 Each ₹ 33,603.40 ₹ 33,603.40

101 19.4 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :

19.4.3.1 180x150 mm size P type

With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 7.00 Each ₹ 1,994.10 ₹ 13,958.70

102 19.30.1 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mmthick with cement mortar 1:3 (1 cement : 3 coarse sand), finishedsmooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design

19.30.1.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 10.00 Each ₹ 4,266.80 ₹ 42,668.00

Total Plumbing Cost Schedule Item ₹ 935,538.90

ADD 6% GST BEYOND 12% (MULTIPLYING FACTOR - 0.0536) ₹ 50,144.89

Total Plumbing Cost Schedule Item C ₹ 985,683.79

103 24.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 Metre depth below ground level.

104 24.3 Supplying, assembling, lowering and fixing in vertical positionin bore well, unplasticized PVC medium well casing (CM) pipeof required dia, conforming to IS: 12818, including required hireand labour charges, fittings & accessories etc. allcomplete, for all depths,as per direction of Engineer -in-charge

24.3.1 100 mm nominal size dia 60.00 Meter ₹ 546.10 ₹ 32,766.00

24.3.2 150 mm nominal size dia 30.00 Meter ₹ 660.10 ₹ 19,803.00

105 24.4 Supplying, assembling, lowering and fixing in vertical positionin bore well unplasticized PVC medium well screen (RMS) pipeswith ribs, conforming to IS: 12818, including hire & labourcharges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.

24.4.1 100 mm nominal size dia 6.00 Meter ₹ 573.10 ₹ 3,438.60

106 24.8 Gravel packing in tubewell construction in accordance with IS:4097,including providing gravel fine/ medium/ coarse, inrequired grading & sizes as per actual requirement, all complete as per direction of Engineer 3.00 M3 ₹ 1,343.20 ₹ 4,029.60

107 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 10.00 ₹ 916.80 ₹ 9,168.00

108 24.13 Providing and fixing suitable size threaded mild steel cap orspot welded plate to the top of bore well housing/ casing pipe,removable as per requirement, all complete for borewell of:

109 24.14 Providing and fixing M.S. clamp of required dia to the top ofcasing/ housing pipe of tubewell as per IS: 2800 (part I),including necessary bolts & nuts of required size complete

110 24.2 Providing and fixing Bail plug/ Bottom plug of required dia tothe bottom of pipe assembly of tubewell as per IS:2800 (part I).

111 Supply Installation , commissioning and testing of single phase 2 H.P submersible pump set having discharging capacity 3.35 lps at a total head of 35 meter (approx) of KSB/Kirloskar or equivalent make with all accessories 7 fitting etc including loading unloading and transpotation of the pump set to the work site with all req. labour materials,tools and tackles installation,testing & commissioning as per standards specifications and direction of E/I 1.00 Each ₹ 30,500.00 ₹ 30,500.00

Total Boring Cost Schedule Item ₹ 158,772.20

ADD 6% GST BEYOND 12% (MULTIPLYING FACTOR - 0.0536) ₹ 8,510.19

Total Boring Cost Schedule Item D ₹ 167,282.39

D. ELECTRIFICATION WORKS

112 1.3 Wiring for light point /fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, phenolic laminated sheet, suitable size M.S. / PVC. box etc as required.

113 1.4 Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI. Box and earthing the point with 1.5 sq. mm. FR PVC insulated copper conductor single core cable etc as required. 6.00 Nos. ₹ 1,248.00 ₹ 7,488.00

114 1.5 Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 350.00 mtr. ₹ 309.00 ₹ 108,150.00

115 1.7 Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required.

116 1.16 Supplying and drawing following pair 0.5 sq.mm. FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

117 1.17 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel / PVC conduit as required. 100.00 mtr. ₹ 42.00 ₹ 4,200.00

118 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

119 1.24 Supplying and fixing following modular o switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet. 60.00 Each ₹ 112.00 ₹ 6,720.00

120 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet 5.00 Each ₹ 131.00 ₹ 655.00

121 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

1.24.7 TV antenna socket outlet 2.00 Each ₹ 131.00 ₹ 262.00

122 1.31 Supplying and fixing suitable size Gl box with modular plateproviding and fixing 3 pin 5/6 amps modular socket outletand 5/6 amps modular switch, connection etc. as required. 100.00 Each ₹ 414.00 ₹ 41,400.00

123 1.32 Supplying and fixing suitable size Gl box with modular plateand cover in front on surface or in recess includingproviding and fixing 6 pin 5/6 & 15/16 amps modular socketoutlet and 15/16 amps modular switch, connection etc. as req uired. 70.00 Nos. ₹ 531.00 ₹ 37,170.00

124 2.9 Supplying and fixing following way horizontal type three pole and neutral sheet steel ,MCB distribution board 415 volts on surface recess,complete with tinned copper bus bar,netural bus bar earth bar dinbar interconnections,powder painted including earthing etc as requried (But without MCB/RCCB/Isolator) 6way (4+18) double door.

125 3.6 Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. 2.00 Set ₹ 13,721.00 ₹ 27,442.00

125 4.5 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface or wall for lighting conductor complete as required, (For horizontal run) 120.00 mtr. ₹ 516.00 ₹ 61,920.00

126 4.6 Providing and fixing copper tape 20 mm x 3 mm thick on parapet or surface or wall for lighting conductor complete as required, (For vertical run) 20.00 mtr. ₹ 559.00 ₹ 11,180.00

127 8.17.1 Supply and installation of 300 mm, 230 v A.C. exhaustfan in the existing opening including making good thedamage, connection testing, commissioning etc asrequired. 20.00 each ₹ 2,572.00 ₹ 51,440.00

128 8.15 Supply and installation of regular/standard model A.C.ceiling fan of 1200 mm sweep including wiring thedown rods of standard length (upto 30 cm) with 1.5 sq. 100.00 Each ₹ 2,482.00 ₹ 248,200.00

129 5.3. Supplying and fixing 4'X20 watt LED batten with minimum efficacy 100 lm/w in aluminium housing and complete with integrated electronic driver etc directly on walll ceiling including connections with 1.5 sq.mm FRLS pVC insulated copper conductor etc. as required. (For Non-residential building) 100.00 Each ₹ 762.00 ₹ 76,200.00

130 5.15.4 Supplying and fixing fotrlowing types LED Flood light withminimum efficacy 100 lm/w in die cast aluminium housing,toughened glass, lP 66 protection and complete withelectronic driver etc on poleibuilding including connection earthing the body etc as required. 100wt 12.00 Each ₹ 6,085.00 ₹ 73,020.00

130 6.1 Supplying and fixing of following types lamp in theexisting electrical fitting/ fixtures etc. as required.

131 1.7 Wiring for circuit/ submain wiring alongwith earth wirewith the following sizes of FR PVC insulated copperconductor, single core cable in surface/ recessedmedium class PVC conduit as required.

132 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

7.1.2 .Above 35 sq. mm and upto 95 sq. mm 100.00 mtr. ₹ 326.00 ₹ 32,600.00

133 4.1 Providing and fixing lighting conductor finial,made of 25mm dia 300 mm long ,copper tube having single prong at top ,with 85mm dia 3mm thick copper base plate including holes etc 5.00 Each ₹ 1,056.00 ₹ 5,280.00

134 2211 3.5 core, 150 sq. mm XLPE/PVC insulated PVC sheathed (Heavy duty) armoured electric cable with aluminium cond uctor 100.00 mtr. ₹ 1,322.60 ₹ 132,260.00

135 2.12.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breakersuitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc. as required.Single pole 120.00 set ₹ 237.00 ₹ 28,440.00

136 2.16.1 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps 12.00 set ₹ 967.00 ₹ 11,604.00

2.16.2 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps 12.00 each ₹ 1,035.00 ₹ 12,420.00

137 1.33 Supplying and fixing 2 pin ,6 amp celling rose on the existing junction box/wooden block including connection etc as requried 100.00 each ₹ 64.00 ₹ 6,400.00

138 1.34 Supplying and fixing brass batten/angle holder including connection etc.as required 60.00 each ₹ 80.00 ₹ 4,800.00

139 2.4 Providing and fixing following rating and breaking capacityand pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required

140 2.5 Providing and fixing following capacity busbar chamberwith 4 strips of suitable size made of copper, heavy duty,complete with all accessories including connections, earthing the body etc. as required.

141 2.60 Providing and fixing following capacity double pole/ fourpole OFF-load changeover switches with side handleoperation, in sheet enclosure in existing metal board,including drilling holes in metal panel, making connections etc. as required.

142 1605 63 amps. TPN switch disconnector fuse unit, 12.00 Each ₹ 4,395.00 ₹ 52,740.00

143 1604 32 amps. TPN switch disconnectorfuse unit, rewireable 18.00 Each ₹ 2,033.00 ₹ 36,594.00

144 Approved Rate supplaying and fixing wall /floor mounted cubical board fabrication with 18 guage iron sheet suitable for panel mounted switch discoonecto including bus bar chamber insulator nut boult indicator switch amper digital ct coil voltmeter digital 10.00 sqft ₹ 1,050.00 ₹ 10,500.00

145 2.12 Supptying and fixing following rating, 24Al4L5 volts, "C"curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DBcomplete withconnections, testing and commissioning etc. as required'

146 DGS&D Brand new ISI marked Life Guard ABC type multipurpose Fire Extinguishers 4 Kgs. Capacity, fitted with pressure guage complete in all respects, ready to use, complete installation kit. 10.00 Each ₹ 7,549.75 ₹ 75,497.50

Total Electrical Works Cost - E ₹ 2,024,981.50

Total Cost Schedule Items - (A+B+C+D+E) ₹ 31,840,240.24

Total Cost Schedule Items: Say, ₹ 31,840,240.00

Junior Engineer Assistant Engineer Executive Engineer