Karnataka

Active

Works

Buildings

Repairing and providing gutter pipes in the quarters, supplying and fixing mosquito mesh, carrying out painting works, attending to plaster patch repairs in newly allotted quarter and executing other emergent works in Krishna Block, NGV, Koramangala, Bengaluru

Public Works Department

PWD No.2 Buildings Division Office Bengaluru | Bengaluru Urban, Karnataka

Amount: Refer DocsCloses: 2 Jul 2026Due tomorrow

Tender Value

Refer Docs

EMD Value

₹20,700

Closing Date

2 Jul 2026, 10:00 pmDue tomorrow

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Public Works Department

Work Description

Repairing and providing gutter pipes in the quarters, supplying and fixing mosquito mesh, carrying out painting works, attending to plaster patch repairs in newly allotted quarter and executing other emergent works in Krishna Block, NGV, Koramangala, Bengaluru

Tender Information

Tender ID

309082

Reference Number

PWD/2026-27/BD/WORK_INDENT37036

Tender Type

Open

Product Category

Buildings

Location

PWD No.2 Buildings Division Office Bengaluru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificate and UDIN NO should be mentioned certified from CA

Requiredvalid kpwd license Class iv & above

RequiredAssessed bid capacity

RequiredValid G.S.T. Registration Certificate

RequiredWork done certificate issued by the competant authority of rank not less than Executive Engineer

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Valid KPWD Class IV Civil License & above

Valid License obtained with the Labour Department to be enclosed

Conditional tenders will not be accepted

Tenderer should have Provided Valid copy of Group Insurance policy for Labors /employees.

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs

The employer is not responsible for any delay in accessing E - Procurement Portal

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner

All scanned documents to be uploaded shall be in original, Submit the original document at the time of technical bid opening or next day and the Executive Engineer reserves the right to verify the original documents before approval

If any, additional information required, the same may be obtained from the office of the Executive Engineer, PWD, No. 2 Building Division, Bangalore during office hours on all working days. It may be noted that if any of the dates mentioned above happened to be a General Holiday, the next working day will be considered

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons

The contractors assessed available tender capacity shall be more than the tender value, it will be calculated as per the Standard tender document Attached. Ongoing works list/commitments self attested to be uploaded

The Tender processing fee shall not be refundable

Contractor should follow strictly the prevailing rules of labour laws and minimum wages act

The Bidder shall not furnish any fake/fabricated/false information or withhold facts etc., if the bidder is found to have violated any of these above (found either during evaluation or after awarding the tender), the tender shall be rejected and action as per rules and regulations shall be taken against the Bidder

If the Successful Bidder has quoted lesser rates than the estimated rates then he should remit the Unbalanced Tender Amount along with the Security Deposit within the stipulated time as that shall be specified in the Letter of Acceptance, failing which the tender of the Successful Bidder shall be rejected

Terms and condition of Contract as per Approved Standard Tender Document KW-1

The quoted rates by the bidder shall be EXCLUDING GST

Valid G.S.T. Registration Certificate

Tenderer Shall note, that the tenderers those found eligible to the conditions mentioned in Section-3 Qualification Instructions to Tenderers(ITT) will only be considered for further evaluation

Bidder Should upload the bid capacity calculated as per KW-1 Tender condition, the statements showing the value of existing commitment and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the employer in charge, not below the rank of an Executive Engineer or Equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

Technical Criteria

Past Experience

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 b)Satisfactory completion as prime contractor in similar construction works to an extent of 50% of the cost of the work i.e. Rs 4.12 Lakhs

Satisfactory Performance Certificate

Capabilities of Vendor

valid kpwd license Class iv & above

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26 a)Achieved in at least two financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs.8.25 lakhs

Audited CA Certificate of Annual Turnover

Others

3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx2.5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 12 month. B is Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 12 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- bid capacity

G S T Certificate

GST Registration

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹20,700

Important Dates

Last Activity

25 Jun 2026

Published

25 Jun 2026

Bid Opening

4 Jul 2026

Download Ends

29 Jun 2026

BOQ Preview

•

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Removing the old paint or polish from wood and / or wood based surface with paint remover of approved brand / manufacturer and making surface even including cost of materials, labour, complete as per ...

•

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinar...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall inclu...

•

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground o...

•

Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic glossy or Matt finished laminate (1.5mm thick) and other side balanci...

•

Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work

•

Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

•

Providing and fixing stainless steel 304 grade soft closing hinges with two hole fixing & 165 degrees turning option for Wardrobe, Doors, Kitchen & other utilities of reputed make with scre...

•

Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with sS screws etc. complete as per direction of Engineer-in- charge. 200mm length

•

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 40mm

•

Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery)...

•

Repairing and fixing shutters (panelled or glazed) to doors, windows,

•

ventilators and cupboards.

•

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of ...

•

Providing & fixing fly proof wire gauze to windows, clerestory windows

•

& doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised

•

M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on...

•

Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed bwp g...

•

Cleaning of Glazed tiles using floors and surfaces cleaners non corrosive with chemicals Hydrochloric acid, butyl oley tamine and other which are soluble and capable of removing hard and soft stains a...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW1 GENERAL 37036.docx

Tender Document • 1.34 MB

Ready to Participate?

Download all tender documents and submit your bid