GENERAL FUND(2025-26)

Pole Foundation Making PCC for leveling coarse of size 700mmx700mmx200mm, PCC for leveling coarse 1:4:8 and Making RCC foundation of grade M20 (1 cement: 1.5 sand : 3 stone/brick aggregate) 500mmx500mmx 1200 using steel reinforcement of grade RTS with 50mm clear cover to reinforcement and rings using 8mm dia steel reinforcement @ 190 C/C,using shuttering, along with supply & installation of 2 nos. of 40mm dia HDPE pipe for cable entry and cable exit. 4 no. 'J' type foundation bolts M20 of 650/1000mm Length shall be anchored in the foundation. It includes water curing as required and soil excavation & backfilling. It also includes supply of all material and labour including erection of foundation at Site.

Labour for cutting open road for laying HDPE Pipes

8m Free Standing Single Arm Bracket 8 sided Octogonally continously tapered structuredpole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification.Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mmThe pole should be hot dip galvanized confirming to BESN ISO-1461 with thickness of 65 Micron

Supply and delivery of PVC INSULATED 2 core 2.5 sq.mm. armoured copper cable WITH ISI MARK CONFORMING TO IS including cost and conveyance of all materials and labour charges etc., complete

Supply and laying of following sizes of Armoured Aluminium Cables for electrical motor, control panel, pressure switch, jockey motor etc.. The rate inclusive of all incidental arges, neccessary scaffolding and re doing the dismantled portions to its original condition wherever found neccessary,etc.,omplete as per standard specification and as directed by the Departmental Officers.

150W LED Street Light Fitting with LED including cost and conveyance of all materials and labour charges etc., complete

Supply and delivery of 50mm HDPE Pipe PN 10 including cost of Pipe and Conveyance charges etc complete

Supply and delivery of 75mm HDPE Pipe PN 10 including cost of Pipe and Conveyance charges etc complete.

Lowering HDPE pipes trench and laying to proper grade and alignment and as directed by the Officers (50mm to 75mm dia (OD) HDPE pipe)

MINIATURE CIRCUIT BREAKERS 240 V / 415V 50HZ - AC SUPPLY SUITABLE FOR BOTH LIGHTING AND MOTOR CIRCUITS - HIGHER END- Single Pole 6A to 32A, 10KA

Earthing as per PWD standard with an earth electrode of 2 metre class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work

Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 100A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kioskdoor made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,