Construction of C.C Road and Drain At Ward No.02 Moh-Jatan Chamunda Road From Dipak Sharma Hosue To Naresh House and Main Road To Devraj Singh House Bijnor

Construction of Subgrade and Earthen Shoulders Construction o subgrade and earthen shoulders with approved material obtained from borrow pits withall lift sandleads, transporting to site,spreading,grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.

Concrete in 1:4:8 with cement,fine sand and Stone ballast of 4cm guage including supply of all material,labour and T&P etc.required for proper completion of work.

M-150 brick work in 1:3 with cement,coarse sand mortar including supply of all material,labour and T&P etc.required for proper completion of work.

12mm thick Plaster in 1:3 with cement,coarse sand mortar including supply of all material,labour and T&P etc.required for proper completion of work.

1" thick P.C.C in 1:2:4 with cement,coarse sand and stone grit of 2cm guage including supply of all material,labour and T&P etc.required for proper completion of work

WBM Grading 3 (22.4-53 mm Stone ballast) Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.

Consruction of un-reainfocement dowel joint at expansion and construction joit only cement concrete pavment thikness as per design over a prepared sub base with 43 grade cement or any other type as per cluouse 150.2.2 M30 Grade coarse sand fine aggregate comfirming to IS:383 i/c all completion of work.

R.C.C work in 1:2:4 with cement,coarse sand and stone ballast of 2cm guage including supply of all material,labour and T&P etc.required for proper completion of work

Supply and fixing of mild steel bars for RCC work and angle for channel including supply of all material,labour and T&P etc.required for proper completion of work.