Provn of 02xtoilet block 02xUrinal pot Provn of tilling in Bldg No NP 03 (OR OTM ACCN) AND Provn of Solar water heating plant with allied ancillaries under GE (Army) Dhar Road

Amount

Surface excavation n.exc 30 cm deep and and avg 15 cm deep and getting out any type of soil complete all as specified.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified.

M & L for hard core using broken stone of gauge n.exc 63mm deposited,spreading and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified.

M&L for PCC 1:4:8 type D-2 (using 40mm graded aggregates) as in bed concrete for foundation filling & mass concrete complete all as specified.

M&L for PCC 1:3:6 type C-2 (40 mm graded aggregate) in foundation filling and mass concrete for bottom of manhole complete all as specified & as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in Columns, pillars, piers, etc complete all as specified.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span and complete all as specified.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in Chajjas complete all as specified and directed.

M&L type B1 1:2:4 (20mm graded aggregate) providing RCC precast cement concrete as in cover slab for man hole and similar article with plain face and set in cement mortar 1:4 complete all as specified & as directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter and complete all as specified.

M & L for formwork for rough finished surface of concrete (flat surface) to sides of pillars, posts, struts, piers, columns, and stanchions and complete all as specified.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200mm thick (Horizontal or sloping) and complete all as specified.

M & L for formwork to chajjas and similar items, flat surface incl edges complete all as specified.

M & L for formwork to sides and soffits of floor or roof beam, flat surface etc incl supports, overhangs etc complete all as specified.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified.

ditto all as above but 6 to 8 mm dia and including in stirrups, spacers and binders and complete all as specified.

M&L for brickwork with old size sub class 'B' brick straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

M&L for brickwork with old size sub class `B' bricks, straight or curved on plan to any radius in half brick thk wall, built in cement mortar1:4 complete all as specified.

M&L for rendering 15 mm thick cement plaster in CM 1:6 on brick Work or concrete surfaces including finished even and smooth without using extra cement all as specified and directed.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed. (WPC will be measured and paid separately).

Supply only liquid WPC

M&L, Rendering 10mm thick in CM 1:3 over concrete surface as on ceiling, chhajja, shelves etc to match with existing surfaces finish even and smooth w/o using extra cement complete all as specified and directed. .

M & L for preparation of new plastered surface and applying two coats of oil bound distemper on wall over one coat of primer etc complete all as directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance complete all as specified and directed.

M&L for preparation new plastered surfaces and applying three coat of white washing on ceiling,chhajja, shelves etc surfaces and complete all as directed.

M & L for 50 mm thick PCC 1:3:6 type C-1 (using 20 mm agg. ) as in plinth protection / path/ any paved area complete all as specified and directed.

M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as directed.

M&L for non skid coloured ceramic joint free tiles 7 to 8mm thick area of each tile exe 0.06 sqm but n.exe 0.11 sqm, in floors etc and and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in mortar 1:4 for laying floor finishes and pointed in white or coloured cment to match all as specified and directed.

M& L for Glazed ceramic jointless light/coloured group of size exc 0.13sqm but n.exc 0.18 sqm area of each tiles and thicknes of wall tile not less than 6mm as in vertical surfaces such as skirting/dado etc set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as specified.

S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel with particle board core design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face supplying & fixing inframe at site as per specification & drawing and as per manufactures instructions complete all as specifed

S & F for Solid PVC moulded Door Frame of size 50mm x 47mm made out of 5mm wood grain printed/ colour PVC sheet reinforced with M.S. Square tube, and opening as per manufacturer's instruction complete all as specified and directed.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 10 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame. (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty .(x) Two coat of synthetic enamel paint to MS window and guard bar complete all as specified and directed by Engineer-in-charge.

S&F for Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S& F for 3mm thick sheet glass ordinary quality glazing with oil putty in square n exc 0.5 sqm quality or description from steel frame and all specified.

M & L for two coat of synthetic enamel paint over a coat of red oxide on steel surface including preparation of new steel surface width or girth exc 10cm all as specified and directed.

S&F for MS butt hinges, medium weight, cold rolled mild steel 100mm long (ISI Marked) with welded or complete all as specified and directed.

S&F for aluminum anodized barrel tower bolts of extruded section 150mm long (ISI Marked) complete all as specified and directed.

S&F for aluminum handles cast type anodized 150mm long (ISI Marked) complete all as specified and directed.

M&L for cutting chases in brick wall pinning in making good to facings where required and pointing in CM 1:3 to ends or edges of lintels, etc and cutting chases for concealed water tubing etc and making good cutting n.exc 10cm girth complete all as specified and directed.

S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. .

S & F for vitreous China white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap complete, front or back inlet, fixing bolts, PVC seat cover including 32 mm dia PVC flush pipe and making all necessary connections complete as specified

S&F wash hand basin table top of size 460x460x170 mm vitrous China including , CP waste coupling & PVC waste pipe of 32 mm dia etc complete all as specified and directed.

S & F for vitreous china urinals, half stall type (635x450mm) , complete incl providing and fixing , bedding urinal against wall in cement mortar 1:2 , pointing around urinal back in cement , grating and union for discharge pipe, CP urinal spreader and fitting with CP waste coupling all as specified and directed.

S&F for PVC valveless,syphonic action type, flushing cistern of 10 ltrs, low level of approved colour, with inlet, ball valve, float and handle including brackets and complete assessories complete all as specified and directed.

S&F for PVC connection 15 mm dia with PTMT nuts of length 600 mm complete all as specified and directed.

S&F for rotational moulded polyetheylene water storage tanks (cylingrical verticlal with closed top) of 1000 ltr capacity, hoisted and fixed in any position incl 20 mm dia float valve with aluminium fitting and any GI fitting complete all as specified and directed.

S&F for CP Wash hand basin mixer cast copper alloy, chromium plated, screwed for 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm and fixed,complete all as specified.

S&F 15mm dia bib tap long body cast copper alloy chromium plated with crutch (or) butterfly handles, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S & F for 15 mm Stop valves/Angle cock cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed omplete all as specified.

S & F for 15 mm Stop valves concealed type cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed omplete all as specified.

S&F for Towel Rail CP 20mm dia and 60cm long D type between flanges complete all as specified and directed.

S& F for toilet paper holder of CP with cover complete all as specified and directed.

S&F for grating round 125mm size of CP complete all as specified and directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing complete all as spd and directed.

S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete all as specified and directed.

All as per ser item No above but laid in trench or in floor

S&F for 110mm bore PVC Gully Trap setting / jointed with solvent cement complete all as specified and directed. .

S&F for 110mm bore PVC bends/junction / Tee any radius complete all as specified and directed. .

M&L for preparing surfaces by brushing with wire brushes for removing caked mud etc. Sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt & applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed.

M&L, PCC 1:3:6 type C0 as in roof Pading (using 20 mm graded aggregate ) complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658 -2006 of 60mm thickness, with grey cement, pigment incl 25mm thick sand filling complete all as specified and directed.

M&L for mild steel framed work as in grill, guard bars , framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directed.

M&L for expanded metal, cut to length, bent to shape required and tying with and incl annealed mild steel wire not less than 0.9mm dia or fixing with galvanized steel staples supplied and fixed complete to wood or steel members, weight exc 4 Kg per Sqm, complete all as specifed & directed.

Supply and laying in trenches, jointing and testing salt glazed stoneware pipe grade 'A' drainpipe 150mm bore conforming to IS at any depth over PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregates) for bed of sewage lines of 150mm dia incl packing under haunching against the sides of pipe after they are laid and tested complete (all as per specified in SSR part-I clause 18.68.2) complete all as specified & directed.

M&L for Construction of soakage well 1.80 m dia and 4.5m deep (Internal dimensions) (Brick construction), complete all as specified and as shown on drawing No . CEUZ/TD/1202/03 sheet 1/2 & 2/2 dated 14/10/2014 and 11/05/2007 respectively complete all as specified & as directed.

Supply, Install, Testing and Commissioning of 'Solar Hot Water System' (Flat Plate Collector) based on indirect transfer of heat of capacity 300 LPD ,with electrical heating back up alongwith element & thermostat of suitable cap, installed on roof of Bldg all as specified & directed.

S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 16 sq mm 2 core

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick.

M & L for dry Sand cushioning in trenches for protection of cable including watering and consolidation all as specified and directed. Note: Punned thickness shall be considerd for measurment purpose

M & L for well burnt brick sub class B old size laying in trenches perpendicular to axis of the cable complete all as specified and directed.

Supply and laying in trenches/Floor or fixed to Pole/Wall GI pipe light grade with fitting of size 40 mm bore for protection of cable including dismantling existing pipe complete all as specified and directed by the Engineer-in-Charge.

M&L for GI water tubing medium grade and laid in trenches/floors/wall with running fittings complete all as specified and directed of following sizes

GI tubing 20 mm bore

GI tubing 25 mm bore

GI tubing 15mm bore

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed.

S&F Bib taps, cast copper alloy chromium plated 15 mm with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed

Rotational moulded polyethylene water storage tanks, three layered , ISI marked (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres including GI inlet, out let, over flow and wash out complete all as specified and directed.

Mild steel work as in post and struts in fencing including cutting holes to shapes, drilling hole, notching or riveting etc complete all as specified and directed.

Mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nuts exc 5cm but not exceeding 10cm long, dia of neck 11 to 15mm complete all as specified and directed.

Supply only chain link mild steel galvanised fencing any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc, including provision of binding wire complete all as specified and directed.

Mild steel work of flat, round or square bars in available length conforming to FE 410-W(Gde-E-250) quality 'A' for securing and supporting to chain link fencing complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with 3.00 Kg of cement per sqm all as specified and directed.

M&L for Virified tiles light shade /dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.18sqm but not exc 0.36 sqm , in floors, dado , skirting etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match etc complete all as spd and directed.

-ditto- all as per above item but here- in- before tiles for dado/skirting incl 10 mm thick cement plaster in CM 1:4 as bedding layer complete all as specified and directed.

Taking down shutters from the frame exc 1 Sqm but not exc 2 sqm each, and refixing the same opning after easing & resecuring complete all as specified and directed.

Taking down shutters from the frame exc 1 Sqm but not exc 2 sqm each, complete all as specified and directed.

S&F for 35 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, both sides face is covered with laminated decorative face veneer with lipping/frame to match complete all as specified and directed.

S&F for aluminum anodized barrel tower bolts of extruded section 200mm long (ISI Marked) complete all as specified and directed.

S&F for aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, extruded sections and fixing bolts alloy and fixed, 300mm long, complete all as specified and directed.

S&F for aluminum handles extruded aluminium alloy handles, fabricated type, anodised 150mm long (ISI Marked) complete all as specified and directed.

M&L for 18 to 22 mm thick Kota stone slab in flooring (Machine cut) of any size laid over and incl 20mm thick bedding layer in cement mortar 1:6 over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab incl rubbing and polishing to achieve mirror finish & dismantling complete all as specified.

M&L for 18 to 22 mm thick Kota stone slab in riser, steps, skirting, dado and pillar laid over 10 mm thick 1:3 cement mortar jointed and pointed in grey cement mixed with pigment to match the shade of slab incl rubbing and polishing to achieve mirror finish complete as in flooring all as specified.

M & L for 20mm thick makrana white marbles tiles machine cut beded jointed incl 20mm thick bedding layer in CM 1:6 over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring complete all as specified

M&L for factory made pre-cast cement concrete block type B1, 1:2:4 as in kerb stone made to shape as directed, exc. 10 cm in width and setting in mortar 1:4, complete all as specified and as directed.

M & L broken stone hard core of gauge n.exc. 63mm, deposited, spread and leveled in layers n.exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.

M&L 100mm thick PCC type D-2, 1:4:8 (using 40mm graded aggregate) as in sub base all as specified and directed.

M & L for concealed point wiring on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and Bakelite laminated sheet 3mm thick ISI marked for fixing of switches / sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screw and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash all as specified and directed by Engineer-in-Charge for the following:-

One light /Fan/Bell point controlled by one switch 6/5 Amp one way single pole.

One switch socket outlet point 3 pin 5 Amps on Independent board.

One switch socket outlet point 3 pin 5 A same board

All as per item No 2 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

Supply and fix LED mirror wall light/Mirror light fitting 10 watt 2 feet long, 230 volt, 50 Hz complete with LED light all as spd and dir by EIC.

S&F Wall mounted LED batten 20 Watt with 01 No LED tube rod, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver complete all as specified and directed.

Supply and fixing of new Exhaust fan AC single phase 230 volts for size 300 mm sweep, including making hole and fixing arrangement including nut, bolts, washer etc, making good the disturbed surfaces matched with existing finishes comprising with necessary eletric connection with suitable copper wire from ceiling rose including providing new louver and mosquoito net with frame complete.

Supply and fixing of building security LED fitting upto 40 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection incl taking down complete all as directed by EIC

S&F 1.5m long 40mm bore light grade GI pipe bracket duly cut to size and bent to shape required duly painted with 2 coats of aluminium paint (of approved tint) over a coat of red oxide primer, including suitable 2 Nos. Clamps as required to fix on concrete / steel poles incl taking old unsve GI bracket any type and size complete all as specified and as directed

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

S&F ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and as directed.

S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and as directed.

S&F socket outlet, 2 in 1, 3/5 pin 6 / 16 Amp, piano flush type complete all as specified and as directed

S&F switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all as specified and as directed.

Supply and fixing socket outlet 5 Amp 230 volt ISI Mark complete all as specified and directed

Supply & Fixing SPN Distribution Box, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, confirming to IS 13032 & 8623 complete all as specified and directed.

Supply & Fixing MCB SPN, 40-63 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

Supply & Fixing MCB SP, 06 to 32 Amps 240 volts, AC , 10 KA breaking capacity 'C' Series,"ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed.

M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nut, bolts, reducer, nipple, wire meshed/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.Earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate beyond 7.5 metre, the same shall be measured and paid separately).

supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/GI pipe 20 mm dia

Cutting/making hole into CI/DI/MS pipes of 100 mm carefully and insertion of new tee incl clamping with suitable size clamp for taking small branch connection upto 40/25 mm bore complete all as directed by EIC.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core

S.K CONSTRUCTION

M/S PAWAN KUMAR ANAND