TOWER BOLT OF Dia D = 10 mm

The tender will be governed by Railway Board letter No.2020/RS(G)/779/ 2 dtd. 12/06/20 and 2015/RS(G}/779/5(Vol.l) dated 24/09/2020 & 2015/ RS(G)/779/5(Vol.III) dated 12.07.2020 for Public Procurement (Preference to Make in India). Since, there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to Class I local suppliers only with minimum local content of 50% or more and the vendors who do not qualify to be Class I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. THIS TENDER COMPLIES WITH PUBLIC PROCUREMENT (PREFERENCE TO MAKE IN INDIA), ORDER 2017-Revision Regarding issued by Ministry of Commerce and Industry order No. P-45021/2/2017-PP(BE-II) dated 16.09.2020. Tenders must furnish the information giving the percentage of local content. Please refer to para 1800 of WR bid document of INSTRUCTIONS TO TENDERERS FOR ELECTRONIC TENDERS AND GENERAL CONDITIONS OF TENDER Indigenous Purchases Version-14 of June 2024 attached with tender.

The bidder seeking EMD exemption, must submit valid supporting document for the relevant category. Under MSE category, only manufacturers having UDYAM certificate are eligible for exemption from EMD. Traders are excluded from the purview of this Policy. UDYAM certificate should be uploaded for MSE benefits. Rly Bd letter No. 2020/RS(G)/363/1 dt 03.11.2022 is applicable. Firm to declare themselves whether they are Trader or OEM of the offered product

Item reserved for Procurement from MSE fims registered with UDYAM Registration Certificate having valid BIS certificate only from tendered (IS: 204 part-1)-1991 for required product category.

OEM: Procurement from Authorized Agents/Dealers/Distributors etc. shall be as per para 0400 of Western Railway Bid Document (Indigenous Purchases), Version- 14 of June 2024. a) OEMs should quote directly preferably or an OEM can authorize and give Tender Specific Authorization (TSA) to its Agent / Dealer to quote on their behalf similar to proforma attached as Annexure-2. b) The Authorized Dealer/Agent should upload valid tender specific authorization, along with the offer, failing which their offer is liable to be passed over. c) Trader/Authorized Dealer should mention name of Manufacturer, make and complete address in their bid for inspection of material at OEM works. d) In a tender, either the authorized agent/dealer on behalf of the Principal/OEM or the Principal/OEM itself canbid, but both cannot bid simultaneously for the same item in the same tender. e).Further, against a particular tender, one Principal/OEM should not issue Tender Specific Authorization to more than one agent/dealer.Such offers will be treated as ambiguous offers, the bidder(s) or their Principal/OEM will have no right to lodge any claim. e) If an authorized agent/dealer submits bid on behalf of a Principal/OEM, the same agent/dealer shall not submit a bid on behalf of another Principal/OEM in the same tender for the same item/product and such bids will be summarily rejected.

(i) If the purchase order (PO) is placed on NSIC/MSME-registered firms, inspection shall be carried out through Third Party Inspection (TPI). (ii) If the purchase order (PO) is placed on a BIS-certified NSIC/MSME firm, inspection by the consignee based on the manufacturers WTC is acceptable.

Have you quoted in the prescribed performa ?

Have you furnished the statement of deviations [preferably nil] ?

Have you quoted price on the basis of free delivery to destination, indicating the break up ?

Have you quoted delivery period correctly and precisely ?

Have you kept your offer valid for 120 days.

Have you submitted authenticated copy of the document authorizing the signatory to submit offer and commit on behalf of tenderers ?

I/we hereby agree to supply the offered goods at a quoted rates as per IRS conditions of contract and other terms & conditions specified in this tender.

Have you submitted Earnest money ?

Are you MSE tenderer and seeking exemption from EMD, if so, Have you submitted required credential for tendered item?

It shall be the responsibility of the tenderers to quote correct HSN number and corresponding GST rate. Have you checked HSN code and have quoted corresponding GST rate.

Have you submitted self certification of local content requirement ?

Have you mentioned MAKE / BRAND of OEM ?

WARRANTY / GUARANTEE :As per Clause 1200 of the INSTRUCTIONS TO TENDERERS FOR ELECTRONIC TENDERS AND GENERAL CONDITIONS OF TENDER Indigenous Purchases Version-14 of June 2024 or latest with all corrigendums and amendments, if any along with all latest RB guidelines issued before the tender closing date.In the event of any conflict, Clause of the Technical Specifications shall prevail.

Security Deposit : SD will be applicable as per para 0600 of Western Railway Bid Document (Indigenous Purchases), Version - 14 of June 2024 and clause no. 3.4 of IRS Condition of Contract, 2025. Bank Guarantee: As per proforma given in Annexure-5 of Western Bid Document (Indigenous purchase), version 14 of June 2024. Note:- Offers from firms not exempted and denying to pay Security Deposit will be summarily rejected

LD Clause: Recovery of Liquidated Damage (LD) shall be levied @1/2% (half percent) of the price of store per week or part of the week during which delivery is accepted and the upper limit for recovery of Liquidated Damages in supply contract is 10% (ten percent) of the value of delayed supply irrespective of delays, unless otherwise provided, specifically in the contract. Orders on developmental vendors shall be developmental orders and treated as such, specifically, with regard to applicability of liquidated damages for delayed supplies and levy of general damages as per Railway Board letter no-No. 2001/RS(G)/779/7 Pt 2 dated 25.06.2018.

GST COMPLIANCE:- As per clause 0906 of INSTRUCTIONS TO TENDERERS FOR ELECTRONIC TENDERS AND GENERAL CONDITIONS OF TENDER Indigenous Purchases Version-14 of June 2024 or latest with all corrigendums and amendments, if any, issued before the tender closing date shall be applicable.

Land Border Conditions: A bidder from a country which shares a land border with India will be eligible to bid only if the bidder is registered with Competent Authority as specified in Para 1810 and Annexure-7 of Western Railway Bid Document (Indigenous Purchases), Version -14 of June 2024. 1. "I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India; I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (Where applicable the evidence of valid registration by the Competent Authority shall be attached.)" 2. I have read the clause regarding restrictions on procurement from a bidder having Transfer of Technology (TOT) arrangement. I certify that this bidder does not have any TOT arrangement requiring registration with the competent authority." OR "I have read the clause regarding restrictions on procurement from a bidder having Transfer of Technology (TOT) arrangement. I certify that this bidder has valid registration to participate in this procurement." (Tick whichever is applicable, and also where applicable, evidence of valid registration by the Competent Authority shall be attached). If the bidder fails to give above mentioned declaration along with the offer, then it will be considered that the contents of above declaration have been read and unconditionally agreed and accepted by the tenderer. If the tenderer are not agreeable to this declaration they have to categorically mention about the disagreement in Techno Commercial Deviation.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.