Replacement of conventional light fixture into LED light fixtures at Residential area

Amount

Supply, installation, testing and Commissioning of 18W- 20Watt LED light 4 feet Batten Luminare having minimum system Lumen output of 2000 Lumens, minimum system efficacy of 100 Lumen/Watt, Colour temperature (5700 K to 6500K) in Cool day light, extruded Aluminium housing, Power factor >0.90 CRI>80, THD(%)<10 with APFC isolated driver with efficiency of >85% Surge protection >2KV, operating voltage 150-270 50Hz A>C. With LED chip make : Cree, Nichia, Philips, Lumiled, Osram, Edison, Seoul, Bridge lux, luminaries shall be complying to LM80 Report from LED manufacturer for burning life of 5,0000 Hrs and LM-79 Report from NABL accredited lab, connection with 3x1.5 sqmm FRLS PVC conductor wire including dismantling the existing fitting giving credit for the buy back value of the old fitting etc complete as required.

Supplying, installation, testing & Commissioning of Surface/Wall Mounted integrated LED 4 feet (Nominal size) Fitting of 17w-20w IP65 with Aluminum Extrusion housing & opal diffuser finish , Integral electronic driver with Output short circuit protection, Surge Voltage Protection of min 2 KV and Safety test as per IS15885, total system Lumen not less than 2000 or above in Cool day Light(5700K to 6500K), Power factor>0.9, CRI (Ra) >80, System Lumen Efficacy>100 Lm/w, THD(%) < 10, LED Lamp Make- Cree, Nichia,Philips Lumiled, Osram, Edison, Seoul, Bridgelux, LED Lamp Efficacy>130 Lm/W luminare shall be complying to LM80 Report from LED manufacturer for burning life of 50,000 Hrs and LM-79 Report from NABL accredited lab, connection with 3x1.5 sqmm FRLS PVC conductor wire including dismantling the existing fitting giving credit for the buy back value of the old fitting etc, complete as required.

Supply, installation, testing and commissioning of 12W – 15 Watt back-lit LED light surface mounted fitting in square shape in Aluminium heat sink/housing (300 mm x 300 mm nominal size) having minimum system lumen out put of 1200 lumens, minimum system efficacy of 80 lumen/Watt, Colour temperature 5700K/6500K in Cool Day light. Power Pactor >.90, CRI>80, THD(%)<10 with APFC isolated driver with efficiency of >85%, surge protection >2 KV, operating voltage 150 to 270 volt, 50 Hz A.C. supply to be fixed direct on the wall/ceiling with all accessories as per specifications. LED Chip make: Cree, Nichia, Philips, lumiled, Osram, Edison, Seoul, Bridge lux, Luminare shall complying to LM80 Report from LED manufacturer for burning life of 50,000 Hrs and LM-79 Report from NABL accredited lab, connection with 3x1.5 sqmm FRLS PVC conductor wire including dismantling the existing fitting, giving credit for buy back value of the old fitting etc, completed as required.

Supplying, installation, testing & Commissioning of Surface/Wall Mounted integrated LED 2 feet (Nominal size) Fitting of Not more than 10w with Aluminum Extrusion housing & opal diffuser finish , Integral electronic driver with Output short circuit protection, Surge Voltage Protection of min 2 KV and Safety test as per IS15885, total system Lumen 1050 or above in Cool day Light(5700K to 6500K), Power factor>0.9, CRI (Ra) >80, System Lumen Efficacy>105 Lm/w, THD(%) < 10, LED Lamp Make- Cree, Nichia,Philips Lumiled, Osram, Edison, Seoul, Bridgelux, luminaries shall be complying to LM80 Report from LED manufacturer for burning life of 5,0000 Hrs and LM-79 Report from NABL accredited lab, connection with 3x1.5 sqmm FRLS PVC conductor wire including dismantling the existing fitting giving credit for the buy back value of the old fitting etc complete as required.

Supplying, installation, testing & Commissioning of surface mounted Back-lit LED Bulkhead light of System wattage not more than 10W, made up of pressure die-cast aluminium with polycarbonate diffuser in opal finish, IP65 protection & impact resistance of IK10. Powered by integral electronic LED driver with 4kV inbuilt surge protection. Total system Lumen not less than 1000 in Cool day Light(5700K to 6500K), System Lumen Efficacy>100 Lm/w, Power factor>0.9, CRI (Ra) >70, THD(%)<20. LED Lamp Make- Cree, Nichia,Philips Lumiled, Osram, Edison, Seoul. LED Lamp Efficacy>140 Lm/W luminaries shall be complying to LM80 Report from LED manufacturer for burning life of 5,0000 Hrs and LM-79 Report from NABL accredited lab, connection with 3x1.5 sqmm FRLS PVC conductor wire including dismantling the existing fitting giving credit for the buy back value of the old fitting etc complete as required.

S AND S ENGINEERS

shriram sharma