33 KV Line Shifting work

Amount

Part A (Materials Provided by contractor)

ST Pole 11 m long

3x300 mm² ‘XLPE’ cable 33 KV

3x400 mm² ‘XLPE’ cable 33 KV

33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor

33 KV ‘XLPE’ C/J Kit 3x300 mm² St. through

33 KV ‘XLPE’ C/J Kit 3x400 mm² Outdoor

Bolts, Nuts, & Washers

Al. Paint

Red oxide Paint

Extra angle for cable support

Clamp for extra angle support

33 KV Top channel 125X65X3200 mm with clamp

33 KV M.S. Angle Iron 65x65x6mm bracing with clamps (01 set=02 No angle with 04 No clamp)

33 KV Polymer Disc Insulator B&S type

33 KV Polymer Disc Fitting as suitable for Dog/Panther conductor

PG clamp for as suitable Dog/Panther conductor conductor

33 KV Stay complete (Stay ROD 20X1800mm, stay wire 7/8 SWG 10 kg, stay clamp, nut bolt and washer with concrete grouting)

Earthing complete (MS Earthing Rod 20x2500 mm with GI wire 5mm)

Part B Work

Erection of Four pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for (M.S. angle iron bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Disc insultor with fitting, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) . (Grouting of Pole as per UPPCL Norms LS 5 feet).

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (2M depth x1M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/HDD Method as per site required.

Laying of 33 KV 3x400 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (2M depth x1M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/HDD Method as per site required.

Rising of 33 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work. (Provided by contractor)

Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor.

Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Straight Through.

Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x400 mm² Outdoor.

special Pipe Earthing Complete for Cable jointing Kit complete materials with work provided by contractor.

Labour charges for inserting of MS Pipe, Rising of 33 KV cable and jumpering complete work.

Digging the existing cable loop and jointing with new cable. after the cable jointing, cable duct will be constructed. (size 5feetx5feet by brick work and RCC slab with filled sand and brick) according the railway instruction size can be change as per site condition.

road restoration charges.

Break the RCC surface of railway campus and ready for laying of cable. After the laying of cable filled with RCC complete work.

Dismentling charges of existing Single pole on 11 mtr. Long ST Pole complete.

Dismentling charges of existing Single pole on 11 mtr. Long Rail Pole with stud pole (01 No Rail Pole +01 No ST Pole) complete.

Dismentling charges of existing Double pole on 11 mtr. Long Rail Pole with stud pole (02 No ST Pole) complete.

Dismentaling of old ACSR DOG conductor and rolling in pieces.

Dismentaling of old ACSR Panther conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old and damaged 33 Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

M/s Anil kumar singh

V.K. TRADERS