Construction of Bandhara at Vayangavade Agrasana, Malvan taluka.

Clearing cutting throny hrubs bushes, grass to a distance of 15 m. and 1.50mtr. Lead & lift upto 1.50m.

Excavation in all kinds of soil, soft murum, incl boulders upto 0.60m diametre (0.113cum.) for canal,seating of emabankment, filter drain/catch water drains etc.. And placing the ecaxavated material neatlyy in dump area or for formtion of service road as directed incl. cost of ll materials. machinery, labour, dressing bed nd sides to required level and profile etc. comp. with lead up to 15m and lift 6.00m etc. comp.

Excavation in hard murum, incl boulders upto 0.60m diametre (0.113cum.) for canal,seating of emabankment, filter drain/catch water drains etc.. And placing the ecaxavated material neatlyy in dump area or for formtion of service road as directed incl. cost of ll materials. machinery, labour, dressing bed nd sides to required level and profile etc. comp. with lead up to 15m and lift 6.00m etc. comp.

Excavation in soft rock without blasing incl. boulders upto 0.60m diametre (0.113cum.) for canal,seating of emabankment, filter drain/catch water drains etc.. And placing the ecaxavated material neatlyy in dump area or for formtion of service road as directed incl. cost of ll materials. machinery, labour, dressing bed nd sides to required level and profile etc. comp. with lead up to 15m and lift 6.00m etc. comp.

Excavation in hard rock of all toughness including boulders above 0.6 m dia.(0.113Cum) for canals cut-off trench of embankment filter/catch water drains and other appurtenant structures by control blasting methods including control of vibrations by use of delay detonators and control of fly rocks by muffling arrangements and adopting only jack hammers for drilling holes and minimizing damage to side slopes of canal in water prism area by adopting any one or combination of line drilling /presplitting /smooth blasting techniques including cost of all materials, machinery, labour, placing excavated rock neatly approved dump area as directed etc. complete with leads as below and all lifts as directed.

Providing 1.50m depth Drilling grout holes of 50 mm.dia. and fixing anchoring bars of 25mm dia. of 2.00m in length in foundation etc. comp.

Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer considering lead of 50 m with shuttering and scaffolding, placing, compacting, curing etc. complete with an initial lead of 50 m. & lift of 1.5 m.

Provding & laying in position M.S. reinforcement of various dia. Incl. cleaning cutting, cutting, bending, hooking, binding with binding wire etc. comp. (TMT bars 12mm)

Providing structural steel work in single stanchions composed of R.S.J. Channel etc.with caps,bases,mild stee lplated,angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication,hoisting,erecting fixing in position,making riveted/ bolted/welded connection and one coat of anticorrosive paint and over it two.coats of oil painting approved quality and shade etc. complete.

Manufcturing and fixing with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177.