WATER METER AT AMDALLI TOWNSHIP UNDER GE (SB) KARWAR

Amount

NOTES for item No 1.00: (a) Contractor has to employ following staff for Manning and Operation of water supply installation at each shift of 08 hours: (i) One No skilled electrician/Fitter general mechanic operator per shift of 08 hrs (Total 03 shifts per day) having minimum ITI qualification in respective trade from govt recognized institution with adequate knowledge with minimum two years experience in maint & operation of water supply installation. The operator must be competent to carry out the minor maint of water supply installation all as specified and as directed. (ii) One No skilled valve operator per shift of 08 hrs (Total 02 shifts per day) having minimum ITI qualification in respective trade from govt recognized institution with adequate knowledge with minimum two years experience in maint & operation of water supply pipes & valves. The operator must be competent to carry out the minor maint of water supply pipe line & valves. (b) Chemicals for chlorination/dozing and engine oil will be measured & paid saperately under respective items here in below however cost of labour is deemed to be included in the unit rate quoted against item No 1.00 (c) Each shift duration shall be of 08 hours and duty timing shall be decided by Engr-in-Charge. (d) Power supply for operating the installation and diesel for runnig the DG set shall be made available by dept free of cost. (e) The unit rate quoted shall be deemed to include for daily minor maintenance like checking and rectification of any water leakage, loose connection, cleaning and general up keep of pump room/GLR/HTR and area around it. (f) The operator shall ensure general area cleanliness and upkeep of the installation on daily basis.

(g) The routine preventive maintenance /checks shall be strictly carried out by the operator all as stipulated in the operation & maintenance manual. (h) The unit rate quoted shall deemed include for maintenance for earthpits, cutting & removing of vegetation and upkeep of the surrounding area, all around the bldg upto 6 m from the plinth protection all as directed by Engr-in-Charge. In case of failure, a penalty of Rs 2000/- per month will be levied and recovered from dues. (j) The Contractor shall not employ same tradesman continuously for more than 11 months during the Contract period of 11 months. (k) In case of failure due to absence of operative staff, the contractor shall be liable to pay compensation at twice the cost of a day’s Manning & Operation derived from pro rata rate of Sch ‘A’ quoted rates. (l) The contractor shall provide 02 uniforms to each operator & helper and design of uniform shall be got approved from Engineer-in-charge. In case contractor fails to provide the uniform, recovery @ of Rs 2000/- per uniform will be recovered. (m) The rate quoted shall deemed to be inclusive of safety gear & required tools for minor maintenance. In case of failure to provide tools kit & safety kit (Gum boots-02 pairs, hand gloves), a penalty of Rs 3000/- will be recovered and levied. (n) The Contractor shall maintain proper records of all kinds of daily, weekly, monthly, quarterly, half yearly and yearly or whatsoever maint is carried out during contract period in a binded book / register and shall obtain the signature of Engineer-in-Charge. (o) The contractor shall maintain all the registers under various labour law rules, 2017 and shall produce to GE and as well as officers detailed by labour department. (p) Cost of routine maintenance spares will be measured and paid separately under respective items here in after. However, cost of labour is deemed to be included in the unit rate quoted above.

(q) The contractor shall pay the wages to the electrician/ Fitter general mechanic /Valve operators (as applicable) through e-payment i.e Aadhar linked bank accounts(Credit to their bank account). Engr-in-Charge shall ensure that e-payment made to electrician/ Fitter general mechanic /Valve operators and their wages shall not be less than prevailing minimum wages fixed by state Govt or central Govt whichever is more. Monthly e-banking statement shall be furnished by the contractor to the Engineer-in-Charge and the same shall be kept in record duly verified. (r) It is the responsibility of contractor to deposit the Employees Provident Fund (EPF) to the concerned authority as per the prevailing scales as laid down by the Ministry of labour for all Electrician/operator/helper (as applicable) and necessay proof to this regard shall be submitted to GE for verification and records. The quoted rate shall be deemed to be included of above provisions. In case contractor fails to produce the proof of EPF, he shall be liable for action as deemed fit. Decision of GE in this regard shall be final and binding.

Supply only alum lump grade 1st quality all as specified and as directed.

Supply only Calcium based granular disinfectant having chlorine concentration 65%-70% all as specified and as directed. NOTE for item Nos 2.00 and 3.00: The chemicals shall be supplied periodically as per requirement and as directed by Engr-in-Charge.

M & L for cleaning RCC Ground level reservoirs/ Hill top reservoir at Amdalli of following capacities including mouths of connected pipes etc by dewatering the reservoirs by using a portable pumpset of suitable capacity, removing all sludge/mud/dirt etc manually, pouring fresh water in sump through another pumpset, rinsing and dewatering the sumps including removing sludge/dirt particle manually, wash the sump using fresh water mixed with sodium hypochlorite & drain out water by a pumpset and finally applying one coat of antibacterial sodium hypochlorite solution to inner surface & writing details of cleaning in prescribed format complete all as specified and directed.

(a) 18,00,000 litres (2 x 9,00,000 ltrs)

(b) 3,00,000 litres

M & L for taking down, dismantling electric motor of following capacity of any make, 3 Phase 415 Volts and transporting to workshop, opening the motor, cutting/ removing the existing burnt winding and rewinding using super enamelled copper wire of suitable gauge to match with the existing winding including varnishing & drying and reassmbling the motor, connecting with pumpset with proper alignment and testing complete all as specified and directed by Engr-in-Charge.

M & L for cleaning the dual filters by opening up the inspection covers, removing the existing filter media, cleaning thoroughly & refilling the same & topping up the deficient media with granular fine pebbles of required quantitity & fixing back the covers including replacement of existing unserviceable rubber gasket all as directed. NOTE: Filter media required for topping up shall be measured under relavent item of this schedule.

Supply and filling granular fine pebbles of size 40 mm to 6 mm suitable for filter media of rapid sand water filters free from all types of salts, alkaline materials, minerals, silts, impurities etc all as specified and directed.

Supply and filling quartz coarse sand suitable for dual filter complete all as specified and directed.

M & L for preparation of old decorated surfaces, filling cavities with filler and applying one coat of synthetic enamel paint as per colour code with spray machine on surfaces of drinking water pump house at Amdalli comprising of pressure sand filters, air compressors, motor, pump, water pipe lines etc including indication markings all as specified and directed.

Supply & Filling in replacement Engine oil grade 15 W- 40 in DG Set for routine maintenance all as directed.

M & L for overhauling of centrifugal pump sets/ vertical turbine pumps 3 Phase, 415 V of following capacities by opening up the pumpset, cleaning inside and outside throughly including replacement of gland packing, rubber insertion, replacement of bearings - 02 Nos (DE/NDE) and testing complete all as specified and as directed.

S & F in repairs cast iron sluice valve of size 100 mm flanged PN-1.6, ISI conforming to IS:14846 hand wheel operated, stainless steel stem with gun metal parts flanged driller conforming to IS: 1538 non rising stem PN-1.6 all as specified and as directed.

Description all as per item No 12.00 herein above but size 150 mm dia.

Description all as per item No 12.00 herein above but size 200 mm dia.

Description all as per item No 12.00 herein above but size 250 mm dia.

S & F in repairs new battery of 12 Volts 180 AH all as specified and as directed.

Dismantling and taking out carefully defective spindle from sluice valve of size 150 mm dia and removing the old gate stud by grinding and making it to a shape by brass welding and turning, polishing, greasing, servicing as per original gate stud and refixing the same at position and testing complete all as specified and as directed.

Description all as per item No 17.00 herein above but size 200 mm dia.

Description all as per item No 17.00 herein above but size 250 mm dia.

Description all as per item No 17.00 herein above but size 300 mm dia.

S & F in repairs gland packing for pump of size 3 HP - 15 HP as per site requirement all as specified and as directed.

S & F in repairs nuts, bolts, washers flange etc all as specified and as directed.

Supply only grease for pump bearings all as specified and as directed. MAKE: Indian oil corporation Servogem-3 or equivalent in Bharat Petroleum or Hindustan Petroleum as approved by GE.

S & F in repairs rotational moulded polyethylene water storage tanks of 1000 litres capacity, triple layer (cylindrical vertical with closed top), dust proof with ISI mark black colour having locking arrangement, hoisted and fixed in position including dismantling the existing one all as specified and directed.

S & F in repairs bearing No 6309 ZZ all as specified and as directed. MAKE: SKF/TATA/NBC/FAG or equivalent as approved by GE.

S & F in repairs bearing No 6314 ZZ all as specified and as directed. MAKE: SKF/TATA/NBC/FAG or equivalent as approved by GE.

Supply & fixing in repairs chemical resistant rubber pipe of size 15 mm dia complete all as specified and as directed.

ANKIT SHIP REPAIRERS AND SUPPLIERS

M/S DK Enterprises

M/S KAMALKANTH NAIK

Bidder Name

M/S KAMALKANTH NAIK

ANKIT SHIP REPAIRERS AND SUPPLIERS

M/S DK Enterprises

U k Enterprises