SPECIAL REPAIRS TO ROAD NEAR BLDG NO P-34 TO P-35, P-28 TO P-37 GATE NO. 01 TO GATE NO. 02 AND OTHER SERVICE ROAD NEAR BY P-20 AT NAYA RAIPUR MILITARY STATION

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water,scoring sunken surfaces in raods, apths, etc. cutting arounds edges to at least 25mm in depth, kaing good by filling in screened & graded road metal, watering and well ramming (including supply of raod metal) all as specified and directed.

Scarifying or picking gravelled,macadam or bituminious macadam surfaces in area not exc 400 Sqm & n exc 50mm deep all as specified and directed.

M&L for Applying evenly a priming/ tack coat with bituminous primer at 5 kg per 10 sq metre (Paving bitumen) complete all as specified and directed.

M&L for Applying evenly a priming/ tack coat with bituminous primer at 10 kg per 10 sq metre (Paving bitumen) complete all as specified and directed.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.complete all as specified and directed.

M&L for Premix bituminous, macadam with binder content of 4% by weight of total mix using paving bitumen VG-30 grade, laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and directed. Note :(i) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications) with the following Constraints:- Aggregate passing 26.5 mm IS Sieve -100 % Aggregate passing13.20 mm IS Sieve -60% to 80% Aggregate passing 4.75 mm IS Sieve -20% to 30% Aggregate passing 2.36 mm IS Sieve -5% to 10%

M&L for bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content of paving bitumen (VG-30 grade) by weight of total mix, rolled and compacted, mixed in mechanical hot mixed plant and premixed material, laid with mechanical paver finished including rolling to required camber and gradient complete with 8 to 10 tone power roller to required compaction complete all as specified and directed. Note :(i) Design Mix for SDAC shall be carried out through an authorised testing lab and the cost of testing shall be included in quoted rate. (ii) Aggregates for Bituminous works shall confirm to clause No 20 B 2.5 of SSR 2009 Part- I (Specifications) with the following Constraints:- Aggregate passing 13.2 mm IS Sieve -100 % Aggregate passing 5.60 mm IS Sieve -40% to 50% Aggregate passing 2.8 mm IS Sieve -30%to 35% Note for item No. 2 & 5: Based on job mix formula, in case the binder content (i.e. Bitumen) is less than the content specified under these items then a minus adjustment @ Rs 40/- per kg of bitumen (less consumed) shall be applied on the quoted rate of contractor against these items, hence the quoted rate of contractor shall be reduced based on less content of bitumen required as per job mix formula. However, no price adjustment on plus side shall be made for increase of quantity of bitumen in case of required as per job mix formula.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in Sub basefinish the cement concrete surfaces complete all as specified and directed.

M&L 100 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate laid in panel finished even and smooth with using extra cement as in flooring complete all as specified and directed.

M&L for sand cushioning including spreading in layers and rolled consolidated to thickness of 50mm (minimum) for receiving precast PCC interlocking blocks complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid dry or laid dry and pointed etc complete all as specified and directed.

S&F Rubber mould casted Machine pressed precast concrete inter locking glazed Paver Block any shape and size Conf. to IS:15658-2006 of 80mm thick M-40 grade with Grey cement and with no pigment complete all as specified and directed.

S&F in repair cat eye solar reflective type of metal body alooy of size 100mmx100mmx20mm with PAMA striplens reflector of model no 972.0 fixed with and incl MS stud of sutiable size as per manufactures complete all as specified and directed.

S&F solar cat eye aluminium alloy shall( 100% water proofing design accosding to 65) of size 125mm*125mm*25mm (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

S&F in repair Retro reflective regulatory sign board of size 900mm dia meter made out of 2 mm thick aluminium sheet,face to be fully covered with high intensity encapsulated lens type retro-reflective sheeting as approved by E-in-Charge.Letter,symbols,borders etc. will be as per IRC-67 with required colour scheme on the boards and with the high intensity grade A.The aluminium sheet to be riveted to M.S Frame of angle iron of size 40*40*4mm .The board will be fixed to 1 No. 50*50mm square post made of M.S. angle 50*50*4 mm ,4mm long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respect as per direction of Engineer-in-Charge.

S&F metal tubular dealinator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflector made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600mm height duly powder coated and thermoplastic elastometer 3 band of green , red and yellow reflector radium tape of 25mm wide stirps with anti theft steel net for reflector embedding in PCC 1:2:4 (150*150*300mm) type B1 complete all as specified and directed.

M & L for reflective thermo plastic white road marking paint conforming to BIS-3262, laid down through road marking machine in a layer of CRYSTALEX and use of 5 Kg material per square meter for lines, dashes, arrows, Zebra marking etc by incorporating the white glass beads for reflectivity in required width all as specified and as directed.

Schedule of credit amount of Rs 1070.00 to be deducted during AOC