BALANCE WORK FOR CONSTRUCTION OF 4NO ADDITIONAL CLASSROOMS AT GOVT HSS PALOURA ZONE JAMMU DISTRICT JAMMU

Amount

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) including all lead, lift & carriage.

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) including all lead, lift & carriage.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level 1:4:8 (1 cement 4 coarse sand 8 graded stone agg. 40 mm nominal size) crushed including all lead, lift & carriage.

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/10sqm

Distempering with oil bound washable distemper ofapproved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats) New Work

Making Blackboard (8 no.)one in each class room and four in verandah in cm (1:4) with side patti complete in all respect as per directions of engineer-in-charge.LMR

Engagement of painter for writing name of school/making India map/charts on wall through painter.

Providing and fixing electic point including power point complete in all respects as per directions of Engineer incharge.LMR

Providing and fixing panelled or panelled and glazedshutters for doors, windows and clerestory windowsincluding lSI marked M.S. pressed Butt hinges brightfinished of required size with necessary screws excludingpanelling which will be paid for separately,all complete as per direction of engineer- in charge. Second class deodar wood 35mm thick

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS 3087 marked.

Providing and fixing glazed shutters for doors,windows and clerestory windows using 10 Kg/sqm (4mm thick) float glass pains including ISI marked M.S. pressed but hinges bright fineshed of required size with necessary screws. 2nd class Deodar wood.

Providing and fixing M.S grills of required pattern in frames of windows etc with M.S flats, square or round bars etc including priming coat with approved steel primer all complete fixed to openings/wooden frames with raw/plugs screws etc.

Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16mm Sliding Door bolts

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150x10mm

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100x10mm

Providing and fixing aluminium door handles ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 125mm

Providing and fixing aluminium door handles ISI marked anodised (anodic coating not less than grade AC 10 asper IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100mm

Providing and fixing hardware fixtures (Aluminium) ISI marked anodised (Anodic coating) not less than grade AC 10 as per IS-1868 twin rubber stopper

Cement concrete Flooring in 1:2:4 (1 cement : 2 coarse sand: 4 Graded Stone aggregate) finishing with floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. compete. 50 mm thick 20 mm nominal size stone aggregate Crushed including all lead, lift & carriage.

Providing fixing and incorporating glass strips in joint of terrazo/cement concrete floor 40mm wide and 4mm thick.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete (Size of tile 60x60cm)Double charge

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladders, railings, brackets, gates & similar works.

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion single socketed pipe110mm dia

Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Bend 87.5*110 mm bend

Ranjit chopra

PAWAN SINGH

Kalsi Engineers and Contractors

RAKESH KUMAR

ROHIT ARORA

sahil

satish kumar