Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.2 LAccepted-Finance GOLE GUJRAL JAMMU JAMMU | 1 | Accepted-Finance Found Eligible | |
| 2 | 2₹2.4 L+₹21,900 (9.93%)Accepted-Finance NOT AVAILABLE | 2 | Accepted-Finance Found Eligible | |
| 3 | 3₹2.5 L+₹24,500 (11.1%)Accepted-Finance JAMMU AND KASHMIR | 3 | Accepted-Finance Found Eligible |
| Sl No | Description | Qty | Unit | M/S GOPAL ELECTRICAL L1 | N B Engineering and Electric Works L2 | js electrical and machanical works L3 |
|---|---|---|---|---|---|---|
| 1.00 | Repair to 20 HP 3 phase induction motor of pumping unit no.2 installed at LIS Lehrian. The job involves dismantling the motor by unfastening the foundation nuts and bolts and also decoupling from the pump and disconnecting the electrical connections from the main supply. Shifting of the motor to workshop by mechanical transport. Then complete dismantling of the motor involves extraction of rotor from stator followed by cleaning of stator and rotor using compressed air, organic solvent, CCL4 etc. to remove the dust particles /silt etc. Extraction of burnt winding from the stator, cleaning of stator with petrol. P/F of new winding wire of suitable gauge & size in the stator, varnishing the stator winding with superior quality of varnish. Drying the stator winding with hot air circulation process. Assembling of the motor. Shifting the motor back to LIS. Refitting the motor at its installed position and coupling with pump, making of electrical connections, alignment with pump, testing of motor on full load. Complete job includes the cost of material, labour charges, hiring charges of tools & tackles, transportation charges. Complete Job | 1 | Job | 432 ₹21,168 Lowest | 472 ₹23,128 | 0 ₹24,000 |
| 2.00 | Repairs to 63 KVA electrical transformer with allied works at LIS Lehrian. The job involves disconnecting all the electrical connections and loading in the vehicle with the help of crane and shifting to workshop with mech. transport. Disassembling the transformer at workshop by unscrewing the bolts of top cover and extracting the damage coils with chain pulley block. Rewinding its 3 nos. H.V. coil &3 nos. L.V. coils with superior Aluminium wire of requisite size/gauge. Heating the rewinded coils to attain the required megger value. Providing /Fitting of new gasket, L.T. terminal plate, nuts, bolts, insulators etc. Cleaning of the tank and drying it. Providing/Topping up of 145 litres transformer oil and heating the oil to make it moisture free. Replacement of damaged 3 nos. HV& 4 nos. LV bush rods with the new bush rods as per sample Lowering the windings back in the tank Assembling the transformer by tightening all nuts, bolts and using oil packing sheets wherever necessary. Loading in the vehicle and shifting back to site. Job includes placing of transformer on the platform with the help of crane using skilled manual labour. Fitting the transformer and restoration of electrical connections. Making of LT side cable connections as well as HT side cable connections and charging the transformer on no load conditions and thereafter checking on full load conditions Complete job including cost of material, skilled and semi-skilled labour charges, loading & unloading at both ends and transportation charges as per site conditions of LIS. | 1 | Job | 1,260 ₹61,740 Lowest | 1,388 ₹68,012 | 0 ₹70,000 |
| 3.00 | Repairs to 3 cusec discharge HC pump unit 02 at LIS Lower Manda. The job involves decoupling of pump of unit no. 02 from the motor and removing the top cover, extraction of shaft and impeller assembly together with bearing bracket by using suitable tools & tackles and skilled technicians. Carriage of the impeller shaft assembly by using manual labour, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to impeller shaft assembly at workshop by way of dismantling and extraction of damaged parts. Job includes repairs to pump shaft and impeller at damaged spots by way of re metaling then finishing to proper size so the shaft and impeller should be balanced. Providing and fitting of 2 nos. bearings (2 nos.) at driving and non-driving end. Providing and fitting of new bushes-2 Nos, and applying sufficient amount of grease to avoid excessive wear and tear. Fabrication of glands and studs with nuts. Repair to bearing brackets. Re-assembling of impeller shaft assembly and shifting back to site and there after lowering at proper position, placement of oil seal and closing the top cover along with P/F of new nuts, bolts and studs. Coupling the pump with the motor. P/F of gland packing. Priming the pump. Testing the pump on full load. The Job includes cost of material, labour (skilled and unskilled), loading charges, hire charge of tool and tackles, to and fro carriage charges. Complete Job | 1 | Job | 711 ₹34,839 Lowest | 780 ₹38,220 | 0 ₹39,500 |
| 4.00 | Repair to 20 HP 3 phase induction motor of pumping unit no.2 installed at LIS Lower Manda. The job involves dismantling the motor by unfastening the foundation nuts and bolts and also decoupling from the pump and disconnecting the electrical connections from the main supply. Shifting of the motor to workshop by mechanical transport. Then complete dismantling of the motor involves extraction of rotor from stator followed by cleaning of stator and rotor using compressed air, organic solvent, CCL4 etc. to remove the dust particles /silt etc. Extraction of burnt winding from the stator, cleaning of stator with petrol. P/F of new winding wire of suitable gauge & size in the stator, varnishing the stator winding with superior quality of varnish. Drying the stator winding with hot air circulation process. Assembling of the motor. Shifting the motor back to LIS. Refitting the motor at its installed position and coupling with pump, making of electrical connections, alignment with pump, testing of motor on full load. Complete job includes the cost of material, labour charges, hiring charges of tools & tackles, transportation charges. Complete Job | 1 | Job | 288 ₹14,112 Lowest | 308 ₹15,092 | 0 ₹16,000 |
| 5.00 | Repair to 100 HP 3 phase induction motor of pumping unit no.02 installed at LIS Nud. The job involves dismantling the motor by unfastening the foundation nuts and bolts and decoupling from the pump and disconnecting the electrical connections from the main supply. Shifting of the motor to workshop by mechanical transport. Then complete dismantling of the motor involves extraction of rotor from stator followed by cleaning of stator and rotor using compressed air, organic solvent, CCL4 etc. to remove the dust particles /silt etc. Extraction of burnt winding from the stator, cleaning of stator with petrol. P/F of new winding wire of suitable gauge & size in the stator, varnishing the stator winding with superior quality of varnish. Drying the stator winding with hot air circulation process. Assembling of the motor. Shifting the motor back to LIS. Refitting the motor at its installed position and coupling with pump, making of electrical connections, alignment with pump, testing of motor on full load. Complete job includes the cost of material, labour charges, hiring charges of tools & tackles, transportation charges. | 1 | Job | 1,719 ₹84,231 Lowest | 1,900 ₹93,100 | 0 ₹95,500 |
Tender Value
₹2.5 L
EMD Value
₹4,900
Closing Date
24 Sept 2025, 2:00 pmClosed
Executive Engineer MID Akhnoor/Nowshera
Office of Executive Engineer MID Akhnoor/Nowshera
Repairs to 20 HP 3 phase induction motor 63KVAelectrical transformer at LIS Lehrian 3 cusec HC Pump unit no 02, 20 HP 3 phase induction motor unit no.02 at LIS Lower Manda and 100 HP 3 phase induction motor of pumping unit no.02 installed Nud
2025_IFC_287833_1
MID/AN/45
Open Tender
Machineries/ Mechanical Engg Items
Item Wise
15 days
Akhnoor
Please refer Tender documents.
7 documents required · 7 mandatory
₹200
Executive Engineer MID Akhnoor/Nowshera
₹4,900
Yes
Office of Executive Engineer MID Akhnoor/Nowshera
24 Nov 2025
11 Sept 2025
25 Sept 2025
11 Sept 2025
24 Sept 2025
15 Sept 2025
13 Sept 2025
Repair to 20 HP 3 phase induction motor of pumping unit no.2 installed at LIS Lehrian. The job involves dismantling the motor by unfastening the foundation nuts and bolts and also decoupling from the pump and disconnecting the electrical connections from the main supply. Shifting of the motor to workshop by mechanical transport. Then complete dismantling of the motor involves extraction of rotor from stator followed by cleaning of stator and rotor using compressed air, organic solvent, CCL4 etc. to remove the dust particles /silt etc. Extraction of burnt winding from the stator, cleaning of stator with petrol. P/F of new winding wire of suitable gauge & size in the stator, varnishing the stator winding with superior quality of varnish. Drying the stator winding with hot air circulation process. Assembling of the motor. Shifting the motor back to LIS. Refitting the motor at its installed position and coupling with pump, making of electrical connections, alignment with pump, testing of motor on full load. Complete job includes the cost of material, labour charges, hiring charges of tools & tackles, transportation charges. Complete Job
Repairs to 63 KVA electrical transformer with allied works at LIS Lehrian. The job involves disconnecting all the electrical connections and loading in the vehicle with the help of crane and shifting to workshop with mech. transport. Disassembling the transformer at workshop by unscrewing the bolts of top cover and extracting the damage coils with chain pulley block. Rewinding its 3 nos. H.V. coil &3 nos. L.V. coils with superior Aluminium wire of requisite size/gauge. Heating the rewinded coils to attain the required megger value. Providing /Fitting of new gasket, L.T. terminal plate, nuts, bolts, insulators etc. Cleaning of the tank and drying it. Providing/Topping up of 145 litres transformer oil and heating the oil to make it moisture free. Replacement of damaged 3 nos. HV& 4 nos. LV bush rods with the new bush rods as per sample Lowering the windings back in the tank Assembling the transformer by tightening all nuts, bolts and using oil packing sheets wherever necessary. Loading in the vehicle and shifting back to site. Job includes placing of transformer on the platform with the help of crane using skilled manual labour. Fitting the transformer and restoration of electrical connections. Making of LT side cable connections as well as HT side cable connections and charging the transformer on no load conditions and thereafter checking on full load conditions Complete job including cost of material, skilled and semi-skilled labour charges, loading & unloading at both ends and transportation charges as per site conditions of LIS.
Repairs to 3 cusec discharge HC pump unit 02 at LIS Lower Manda. The job involves decoupling of pump of unit no. 02 from the motor and removing the top cover, extraction of shaft and impeller assembly together with bearing bracket by using suitable tools & tackles and skilled technicians. Carriage of the impeller shaft assembly by using manual labour, loading in transport vehicle, carriage to the workshop in the mechanical transport for repairs. Repair to impeller shaft assembly at workshop by way of dismantling and extraction of damaged parts. Job includes repairs to pump shaft and impeller at damaged spots by way of re metaling then finishing to proper size so the shaft and impeller should be balanced. Providing and fitting of 2 nos. bearings (2 nos.) at driving and non-driving end. Providing and fitting of new bushes-2 Nos, and applying sufficient amount of grease to avoid excessive wear and tear. Fabrication of glands and studs with nuts. Repair to bearing brackets. Re-assembling of impeller shaft assembly and shifting back to site and there after lowering at proper position, placement of oil seal and closing the top cover along with P/F of new nuts, bolts and studs. Coupling the pump with the motor. P/F of gland packing. Priming the pump. Testing the pump on full load. The Job includes cost of material, labour (skilled and unskilled), loading charges, hire charge of tool and tackles, to and fro carriage charges. Complete Job
Repair to 20 HP 3 phase induction motor of pumping unit no.2 installed at LIS Lower Manda. The job involves dismantling the motor by unfastening the foundation nuts and bolts and also decoupling from the pump and disconnecting the electrical connections from the main supply. Shifting of the motor to workshop by mechanical transport. Then complete dismantling of the motor involves extraction of rotor from stator followed by cleaning of stator and rotor using compressed air, organic solvent, CCL4 etc. to remove the dust particles /silt etc. Extraction of burnt winding from the stator, cleaning of stator with petrol. P/F of new winding wire of suitable gauge & size in the stator, varnishing the stator winding with superior quality of varnish. Drying the stator winding with hot air circulation process. Assembling of the motor. Shifting the motor back to LIS. Refitting the motor at its installed position and coupling with pump, making of electrical connections, alignment with pump, testing of motor on full load. Complete job includes the cost of material, labour charges, hiring charges of tools & tackles, transportation charges. Complete Job
Repair to 100 HP 3 phase induction motor of pumping unit no.02 installed at LIS Nud. The job involves dismantling the motor by unfastening the foundation nuts and bolts and decoupling from the pump and disconnecting the electrical connections from the main supply. Shifting of the motor to workshop by mechanical transport. Then complete dismantling of the motor involves extraction of rotor from stator followed by cleaning of stator and rotor using compressed air, organic solvent, CCL4 etc. to remove the dust particles /silt etc. Extraction of burnt winding from the stator, cleaning of stator with petrol. P/F of new winding wire of suitable gauge & size in the stator, varnishing the stator winding with superior quality of varnish. Drying the stator winding with hot air circulation process. Assembling of the motor. Shifting the motor back to LIS. Refitting the motor at its installed position and coupling with pump, making of electrical connections, alignment with pump, testing of motor on full load. Complete job includes the cost of material, labour charges, hiring charges of tools & tackles, transportation charges.
N B Engineering and Electric Works (BID ID -2542897)
js electrical and machanical works (BID ID -2542410)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .