Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹46.5 L+₹2.8 L (6.33%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | Rejected-Technical | - | Rejected-Technical No remarks against firm in WLR |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
14 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
SPL REPAIR TO BLDG NO P-267/1 AND 2, P-268/1 AND 2 (OFFR MD ACCN) AND PROVN OF CERTAIN SANCTIONED WORKS UNDER AGE BR II AT ITARANA ALWAR
2022_MES_568737_2
8119/E8
Open Tender
Civil Works
Item Rate
180 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
GE Alwar
₹90,000
Yes
28 Feb 2023
4 Jan 2023
16 Jan 2023
4 Jan 2023
14 Jan 2023
7 Jan 2023
4 Jan 2023 - 6 Jan 2023
Amount
Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, beded and pointed in any mortar including removing the dismantled material complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises complete all as specified and directed.
Taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including floor finishes such as tiles etc and removing the domolisd material out side of defence land all as specifed and directed.
M&L 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as under floor tiles finished the surface even and rough complete all as specified and as directed.
M&L vitrified double charged ceramic tiles 8-10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.
M&L vitrified double charged ceramic tiles 8-10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.
M&L coloured non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc., laid over and including 15mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L coloured joint free non skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M&L glazed ceramic coloured tiles(Ist quality) in vertical surface 450mm x 300mm x 7-8 mm thick joint free set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in Cement& Sand Mortar 1:4 complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 15mm complete all as directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store bore of pipe 20mm complete all as directed.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 15mm complete all as directed.
Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) bore of pipe 20mm complete all as directed.
S&F 15mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.
S&F 20mm dia steel water tubing medium grade galvanised with all fittings and fixed to wall and ceiling or laid in floor complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good , cutting not exc 10cm girth complete as specified and directed.
S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440mm white with integral foot rest and 'P' or 'S' trap, including provision of Cement concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications as specified and directed.
S&F in repair 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float, handle including Flush Pipe of polyethylene of low or high density or PVC 32 mm dia for low level cisterns and brackets after taking down old cistern all as specified and as directed.
S&F in repairs vitreous china wash basin white of size 550mm x 400mm with padestal stand (ISI marked) including 32 mm CP waste coupling & PVC flexible waste pipe of min 90 cm long, flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.
Supply only 40mm dia high density polyethylene (HDPE) pipes pressure rating 6Kg/Sqcm laid in floor or fixed to walls including taking down old pipes all as specified and as directed.
S&F in repairs stop valves/angle cock bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in reapirs 15mm bore, stop valve, chromium plated, fancy type, with long shank, and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specified and directed.
S&F in repairs bib taps bore of pipe in 15mm, cast copper alloy, fancy type, chromium plated, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repairs fancy type center hole basin mixer without popup waste system but including plain waste 32 mm size with aerator complete cast copper alloy, chromium plated, scrwed downhigh pressure, with long scrwed shankS&Fly nuts scrwed for iron pipes of 15 mm bore complete all as specified & as directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repairs Brass chromium plated shower rose 125mm size fixed to 15mm bore pipe all as directed.
S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges fixed to wall complete all as specified and directed.
S&F stainless steel kitchen plate rack over all size 30" x 31" x 10" and thickness of stainless steel plate 0.60mm, fixed to wall with stainless steel screws complete all as specified and directed.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs washers and wastes including waste pipe fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm complete all as directed.
S&F grating round 100 mm size of PTMT (Minimum weight 25gms) complete all as directed.
S&F PVC (SWR) 75mm dia floor trap, plain with grating including jointing with solvent cement.
S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors all as specified and directed.
S&F 110mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with Holder bat clamps of GI flat iron 25mm x 3mm all as specified and directed.
S&F PVC (SWR) bends 110mm dia any radius.
S&F PVC (SWR) junction single(Single T) equal or unequal with access door110mm dia.
S&F PVC(SWR) Vent cowl of any dia.
S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches or floors.
S&F 75mm dia PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls with Holder bat clamps of GI flat iron 25x3 mm all as specified and directed.
S&F PVC (SWR) bends 75mm dia any radius.
S&F PVC (SWR) junction single(Single T) equal or unequal 75mm dia.
S&F 110mm PVC (SWR) WC connector bent type all as specified and as directed.
Dismantling AC Pipe/ PVC pipes 110mm/ 75 mm dia.
Dismantling water tanks capacity exc 250 & n.exc 500 Litres of any description complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks 500 litres capacity double layers ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and directed.
Disconnecting existing tanks, exc 500 & n.exc 1000 Litres setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and re-fixing in position all as specified and directed.
S&F in repairs 20mm bore ball valves, high pressure, PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron piped and fixed in position all as specified.
S&F in repairs 20mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe and fixed.
S&F in repairs Jet spray chromium plated brass for EWC with & including PVC connection 900 mm long suitable for 15 mm bore GI pipe with PTMT nut & nipple complete.
S&F in repairs health faucet, brass chromium plated for EWC with & including PVC connection 1m long suitable for 15 bore GI pipe with PTMT nut & nipple complete all as specified and directed.
S&F in repairs mirror cabinet PVC frame of size 400mm x 500 mm fixed to wall with rawl plug & stainless steel suitable size screws complete all as specified and direceted.
S&F in repairs wall mixer chromium plated (3-in-1) with arrangement for both telephonic shower and overhead shower with 220 mm max long bend pipe with hand shower of size 100 x 55 mm with 130 mm long arm & 1.2 m house pipe complete all as specified & directed.
S&F in repairs glass corner shelf (Cat Part No T6010A1 of Parryware or equivalent of Jaquar/Marc) complete all as specified & as directed.
S&F fixed in repair vitreous china wash down water closet pan (Pedestal pattern), white including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified & as directed.
S&F in repair PVC connection pipe, 15mm dia & 600mm long with adopter and washer at both end complete all as specified & directed.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n exc 4.00 Sqm each.
Taking down Chowkhats or frame with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each.
Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm each.
S&F mild steel framed work using angle Iron, flat Iron, round bars as in security doos/ gates with end of bars shouldered and or rivetted or forged into spikes, framed guard bars barred into iron doors, walkways railing framework amd similler work confiming to Fe 290, GDE E-165 all as specified and directed.
S&F factory made solid Wooden HDF Moulded door shutter 30mm thick (Stiles) with 2,4 or 6 raised panel design with 3mm thick Moulded Door facing sheet on front face & 3 mm thick plain colour Door Facing sheet on back face,, with raised High Density Boiling Waterproof Fiberboard skins, the core shall be consist of solid core using Machine filled Rigid Expanded Polyurethane Foam of minimum density 40kg/cum with including additional wooden blocks for fixing of locks etc. The door shall comply with and as per IS 15380 : 2003 & IS 13205 : 1991 complete, supplying and fixing in frame at site as specified and directed.
S&F 35 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc (without sash bars) fitted with cut and mitred securing beads for securing glass etc complete as specified and directed sizes of members of shutters as specified in SSR Part I Section 8 clause 8.24 (a) complete all as specified and directed.
S&F stop valves /angle valves bore of pipe 15mm dia, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for pipe or for unions complete all as specified and as directed.
S&F bib taps bore of pipe 15mm dia, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F 5mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified.
M&L for aluminum powder coated (Thickness of powder coating not less than 50 micron) as in ventilators half fixed and half louvers type and small window single leaf cut to size, jointed together with cadmium plated steel screws including rubber packing, aluminium beading or gasket for aluminium sections for fixing glass sheet and necessary fittings complete, screws plugs, handle, tower bolt, stay hocks etc all as specified and directed. Notes :- (i) Weight of aluminium sections shall only be measured. (ii) The supply only rate of glass sheet will be measured seperately.
S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.
S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc. including taking down existing frame work complete all as specified.
S&F in repairs Continuous (piano) hinges, mild steel 30 mm width of flaps, bright finish or electrogalvanised complete all as specified & directed.
S&F solid PVC door frame of size 50mmx47mm made out of 10mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast complete all as specified and directed. (SS Butt Hings shall be paid seperately supply only)
S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification and directed.
S&F mild steel cupboard shutter with frame, Godrej pattern made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type size 65mm 4 lever with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface as original complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.
Supply only stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete.
S&F stainless steel butt hinges, 100mm medium weight and fixed all as directed.
S&F butt hinges, cold rolled mild steel, 100mm medium weight and fixed all as directed.
S&F aluminium anodised barrel tower bolt of extruded section 200mm long all as directed.
S&F 150mm aluminium anodised barrel tower bolts of extruded section.
S&F 150mm extruded aluminium alloy handles , fabricated type, anodised.
S&F aluminium anosided Hasp and staple, 100mm size safety type with mild steel hinge pin including to bolt to hinge plate and fixed with screws complete all as directed.
S&F mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia, 250mm leng, with and including a minimum of 6 bolts and nut, four on bolt plate and two on staple plate and fixed.
S&F stainless steel Curtain rod not less than 20 mm dia with chromium plated including both sides finnials and bracket fancy type fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified and directed.
M&L repairs to sunken floor slab with the following specifications:- (a) Roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor,with proper slope towards GI spout. (c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing admixture as per manufacture's instructions over bottom and vertical surfaces contact with sunken slab, finishing the surface even and smooth using extra cement. (d) Damp proof course on horizontal surfaces with scrapping and properly cleaning the surface to remove loose particles & applying one coat of self priming (33% dilution) and two coats of undiluted material with @ 10.67 lts per 10 sqmt as Damp proof for water proofing ,and Damp proof course on vertical surfaces scrapping and properly cleaning the surface to remove loose particles and applying one coat of self priming (33% dilution) and one coats of undiluted material with @ 4.85 lts per 10 sqmts. Damp proof for water proofing. Make of DPC solution :- Asian/STP/Choksey/Pidilite. (e) Brick bats filling under sunken floor. (f) PCC 1:3:6,type C-2,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase to receive tiles. Note :- For payment purpose only floor area shall be measured.
Taking down carefully existing bitumen tarfelt, including plaster of any description over the surfaces of roof, terraces including flashings and junctions of parapets/Curb walls etc and removing of the rubbish to a distance exc. 500m but n.exc. 1.00 Km and depositing where directed,complete all as specified and as directed.
M&L screed bed 15 mm thick in cement mortar 1:4 mixed with Water Proofing Admixture as per manufacture instructions on concrete surfaces of roof slab finishing the surfaces even and smooth complete all as specified . Note :- Water Proofing admixture shall be measured and paid seperately.
M&L cleaning of all loose dirt and dust from roof and priming the surface with one coat of cold applied bituminous primer @ 0.40 Kg/Sqm conforming to IS : 3384 and applying a layer of APP based polymeric membrane not less than 3mm thick weighing not less than 3.50 Kg/Sqm, reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) and upper side of membrane thermally insulated with white gravel finish uniformly embedded during manufacturing process. It shall be laid by torch application having side over lap 75 mm and at the end 100 mm, all overlaps and joints shall be sealed by torch application. For parapet, membrane shall be taken to a height of minimum 60 cm and inserted inside the parapet in a groove to a depth of 65 mm. The same shall be finished by a membrane flashing. Note : The net area of water proofing treatment shall be measured without any extra allowance for laps & portion inserted in groove which shall be deemed included in the quoted rates.
M&L 75mm thick cement concrete (1:3:6) type C1 using 20 mm thick graded stone aggregate as in plinth protection laid in alternate bays n exc 2.5m length finished even & smooth and joint to be filled with Bituminous mastic filling including necessary form work complete all as specified and directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar includin gall quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles
M&L brick work with Old size Fly ash ’ bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick built in cement mortar 1:4
Demolition of reinforcement cement Concrete in Roof, floors(Other than ground floors), beams, staircase, landing, chajjas and similar suspended work complete all as directed.
M&L use and waste of form work to soffits of suspended slabs such as roof slab n.exc 200mm thick complete all as specified.
M&L form work to edges of concrete flats, treads, breaks in floors, windows cills, concrete railings, floor and roof n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specifed.
M&L use and waste of form work to sides and soffits of chajjas for fair finished surfaces complete all as specified and as directed.
M&L reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like complete all as specifed and directed.
M&L reinforced cement concrete type B1 (1:2:4) nominal mix using 20 mm graded broken stone aggregate as in Chajjas and the like complete all as specifed and directed.
S&F Mild Steel TMT round bars 10 mm dia and over, cut to length, bent to shape required, including cranking , binding spirally for hooping end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
All as per item No 97.00 above but 6mm dia to 8 mm dia.
M&L 7.5cm thick Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified.
M&L 16-18mm thick Granite jet black colour (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, staircase treads and like jointed over and including 15mm thick screed in cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, compltee all as specified.
M&L Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Green in colour including 10mm thick screed in cement mortar (1:6) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, compltee all as specified.
Rounding the edges of stone slabs one edge, such as in steps, cooking plateform and other similar situations complete all as directed.
M&L drilling holes for pipes etc in cooking plateform stone slab including RCC slab nexc 25mm dia and exc 100mm depth complete all as directed.
M&L 15 mm thick rendering in cement mortar 1:4 mixed with water proofing admixture as per manufacturers instructions on fair faces of stone masonry, or concrete surfaces, finished with even and smooth complete all as specified and directed. Note :- Water Proofing admixture shall be measured and paid seperately.
M&L rendering 15mm thick internal surfaces in cement mortar 1:6 on fair faces of stone masonry or concrete surfaces finished even and fair without using extra cement all as specified and as directed.
M&L 5mm thick rendering in cement mortor 1:3 on concrete surfaces as in ceilings (with sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L taking down and removal of loose/disintegrated old concrete/plaster and including and applying 10mm thick bonding coat of modified styrene butadiene emulsion (SBR bonding agent i.e. Nitobond SBR 45) in proportion 1(Nitobond SBR 45) : 1(water) : 3(OPC) by volume with the brushes etc to bind new cement plaster/polymer modified plaster /concrete /screed concrete on old wall/ceiling surface etc complete all as specified..
M&L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified
Supply only liquid water proofing admixture.
M&L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and directed.
M&L one coat of synthetic enamel paint on old painted wood or wooden based surface exc 10cm width or girth including preparation all as specified and directed.
M&L applying two coat of Synthetic enamal paint over a coat of red oxide primer on new steel based surfaces exc.10cm width or girth including preparation all as specified and directed.
M&L two coats of synthetic enamel paint on old steel surfaces of any description over 10cm width or girth including preparation all as specified and directed.
M&L for preparation of newly plaster surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.
M&L applying two coats of distemper oil emulsion over 2mm thick wall care putty on newly plaster surface of walls complete all as specified and directed.
M&L complete removal of existing treatment of any description & applying two coat of oil bound distemper over 2mm thick wall care putty on undecorated old surfaces of walls complete all as specified and directed.
M&L preparing new plastered surfaces of walls and applying three coats of white wash complete as specified and directed.
M&L applying two coats of white wash on old decorated surface of walls including preparation all as specified and as directed.
M&L preparing new plastered surfaces of walls and applying two coats of cement paint over a coat of cement base primer complete as specified and directed.
M&L complete removal of existing treatment of any description & preparation of old surfaces by washing rubbing down and stopping of plastered surfaces and applying two coats of Cement based paint white or tined on walls including cornices etc over a coat of cement base primer complete all as specified and directed.
Demolition and breaking up 150 mm bore drain pipes, salt glazed stone ware set in cement mortar including PCC haunching and bedding, complete.
M&L 150 mm bore reinforced concrete pipe, class NP2, laid and jointed (in CM 1:1) complete with collars all as specified & as directed.
M&L PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate in bedding to NP2 drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore pipe all as specified and as directed.
M&L cutting into existing manholes / Septic tank for connecting new drains making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for 150mm bore pipe.
S&F 50mm thick steel fibre reinforced (SFRC) man hole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 5 ton/Sqm in square, rectangular or circular shape complete all as specified & as directed.
M&L cement concrete 75mm thick 1:4:8 type D-2 using 40mm graded aggregate as in sub base of floors all as specified and directed.
M&L interlocking tiles 60 mm thick (M-35) having compressive strength not less than 35N/MM2 with grey cement and pigment over & including 25 mm thick sand layer all as speicided and directed
M&L surface dressing n.exc 15 cm deep in soft/loose soil all as specified and directed.
Excavation in trenches n exc 1.5 m wide & n exc 1.5 m depth; for foundation etc and getting out in any type of soil complete all as specified.
M&L for plain cement concrete 1:4:8 type D-2 (40 mm graded stone aggt) as in foundations, filling & mass concrete complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified.
Removing excavated material n. exc 50M and depositing where directed at a level n. exc 1.5M above the starting point at the descriation of contractor complete all as specified.
M&L for moorum/red bajri filling in floor or foundation, laid in layers n.exc. 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.
M&L brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in straight or curved on plan to any redius walls built in CM 1:4 complete all as specified & directed.
M&L for reinforcement cement concrete (Nominal Mix), 1:2:4, type B-1(20 mm graded stone aggt) as in beams, bands lintel over 1.5 m span complete all as specified.
M&L for reinforcement cement concrete (Nominal Mix), 1:2:4, type B-1(20 mm graded stone aggt) as in Foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, basement slabs, under reamed piles and mass concrete complete all as specified.
M&L for reinforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in linColumns, pillars, piers, posts and strut complete all as specified.
M&L for form work to sides of concrete foundation, footings, bases of columns, raft & raft beams, sides and soffits (if any) of foundation & plinth beams and similar work, vertical or to batter, rough finished surface of concrete flat all as specified and directed.
M&L form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc all as specified and directed.
M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions all as specified and directed.
All as per item No 97.00 above but 5mm dia and over upto & including 10mm dia in stirrups, spaces and binders all as specified and directed.
M&L precast kerb stone built in PCC 1:2:4 using 20mm graded stone aggregate and fixing in CM 1:4 all as specified and directed.
M&L for 80mm thick machine pressed precast interlocking paver blocks of any shape & size conforming to IS-15658-2006 of M 35 grade with grey cement & pigment complete all as specified and directed.
M&L 15 mm thick cement mortar plaster in 1:4 proportion (added with integral water proofing compound comp last X421 IC on the Brickwork / CC / RCC work or any other type of finish complete all as specified and directed.
M&L preparing new surfaces plastered or unplastered on walls etc & applying two coats of cement base paint over a coat of white wash complete all as specified.
M&L preparing new plastered or unplastered surfaces on walls etc & applying three coats of white wash complete all as specified.
M&L preparing new plastered or unplastered surfaces on ceiling etc & applying three coats of white wash complete all as specified.
M&L 25mm thick type B-0, 1:2:4 (12.5mm graded aggregate) for levelling course all as specified and directed.
M&L hardcore of guage exc 63mm but n.exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/ rammed to a true surface all as specified and as directed.
S&F 5.5mm thick sheet glass of ordinary quality and glazing with oil putty/beads fixed with metal panel pins in square exc 0.50 sqm in each complete all as specified and as directed.
M&L machine cut kota stone slab flooring 20-25mm thick over and incl 20mm thick 1:6 cement sand screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for machine cut Kota stone 15-20 mm thick as in dado and pillar set over and incl 10mm thick 1:4 cement sand screed and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete.
S&F in repairs vitreous china counter top basin size 450mm x 525mm x 195mm shape ovel of Jaquar or equivalent of PARRYWARE / MARC / SOMANY / KOHLER / HINDWARE including 32 mm CP waste coupling & PVC flexible waste pipe of 90 cm long complete all as specified & directed.
S&F Vitreous China bowl urinal flat back, size of 465mm x 355mm x 265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) with including automatic flushing sensor all as specified and as directed.
S&F 32 mm dia PVC flexible waste pipe for urinals/WHB 600 mm long with PVC coupling all as directed.
S&F 15 mm bore Brass CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
S&F 32 mm bore waste fittings, brass, chromium plated for glazed ware basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified.
M&L for PCC (1:2:4) type B-1 using (20mm graded stone agg) as in coping incuding necessary form work weathering, slightly rounded or chamfered and throating as directed complete all as specified.
M&L cement concrete (1:2:4) type B-1 (20mm graded stone agg) as in surface channels, drain and benching complete.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete including forms work, moulds mitred/stopped ends etc complete all as specified.
S&F veneered decorative 6 mm thick plywood, grade I (with BWR resin) decorative veneers on both faces fixed to aluminium frame with all necessary beads, clips, nails etc all as specified and as directed.
S&F sheet glass, ordinary quality 4.80 mm thick fixed with rubber beading and clips size of glass n.exc 2 sqm in each pane complete all as spd & directed.
M&L on site septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete for 10 users all as specified in Chief Engineer Jaipur Zone Drg No CEJZ/2002/TD/S-2 sheet 1/1 and as directed.
M&L for soakage well excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M25 including intercepting chamber and screen chamber made of bricks masonary in CM 1:4, RCC cover slab in M25, interconnecting pipes of RCC complete filled with brick bats of size 2.4 m dia x 3.0 m effective depth all as specified in Chief Engineer Jaipur Zone Drg No CEJZ/2004/TD/S-35 and as directed.
Taking down carefully copper/aluminium point wiring for one light /socket/power point and taking down of teak wood batten/ PVC casing caping and making good disturbed surfaces of walls/ ceiling/ floors etc including dismentling of fittings complete all as specified.
M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including PVC casing & caping with accessories fixed on surface of walls/ceiling by means of PVC sleeves/dash fasteners with cadmium plated screws, all as per IS and including wooden boxes fixed on wall with and including 3mm thick phenolic laminated sheet top cover for mounting switches, sockets, fan regulators etc complete all as specified.
All as per serial item No 166.00 here-in-before but for one fan point controlled by one switch and regulator.
All as per serial item No 166.00 here-in-before but for one exhaust fan point controlled by one switch and regulator.
All as per serial item No 166.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.
All as per serial item No 166.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.
All as per serial item No 166.00 here-in-before but for one light point controlled two, two way switches.
All as per serial item No 166.00 here-in-before but for one bell/buzzer point controlled by one bell push.
All as per serial item No 166.00 here-in-before but for one 3 pin socket outlet 15/16 Amps controlledby one 15/16 Amps switch on independent board with 2.50 Sqmm two single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.
S&F switch piano flush type, single pole, one way, 5/6 Amp, 230 Volts complete all as specified and directed.
S&F switch piano flush type, single pole, two way, 5 Amp, 230 Volts complete all as specified and directed.
S&F bell push flush type 5 Amp 240 complete all as specified and directed.
S&F bell/buzzer AC 230 Volts single pole complete all as specified and directed.
S&F switch piano flush type, single pole, one way, 15 Amp, 230 Volts complete all as specified and directed.
S&F socket outlet for 3 pin (with 2 pin outlet also), 5/6 Amp, flush type 240 Volt complete all as specified and directed.
S&F socket outlet for 2 in 1, 3 pin 5 & 15 Amp, flush type 240 Volt complete all as specified and directed.
S&F ceiling rose surface bakelite 65 x 50mm two or three terminals complete all as specified and directed.
S&F stepped type electronic fan regulator, flush type and connecting up ISI marked 240 volts complete all as specified & directed.
S&F decorative ultra slim liner LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient suitable for 16 Watt to 20 Watt with LED tube of model E-LITE LED Pride Plus and connecting up with and including three core, PVC insulated, sheathed copper conductore cable of required size and length from ceiling rose to fitting complete all as specified & directed. Make :- Havells Cat Part No LHEXBHP71NW018 or equivalent of Philips/ Crompton Greaves /Bajaj/Wipro.
S&F LED type street DRACO Series light luminaire 20 watt 230 V 50 Hz including all necessary fitting accessories and LED complete, all as specified & directed. Make : C&S Cat Part No LTESS20WLED or equivalent of Crompton Greaves / Wipro as approved by GE.
S&F LED bulb 10/11 watt complete all as specified and directed. Make : Havell's/Crompton/ Syska.
S&F lamp holder PVC/Polycarbonatetype with back plate suitable forbatten fittings complete all as specified.
S&F MCCB, 4 pole, 63 Amps rating recupturing capacity 36KA, 415 Volts grade AC, 50 Hz with adjustable thermal-magnetic release and making connection complete all as specified and directed. Make : Legrand Cat Part No 4200 87 or equivalent in Havells/ABB.
S&F sheet metal enclosures, double door type, suitable for fixing TPN with 200 Amps rated bus bar, vertical DB-4 way TPN 415 volts complete all as specified and directed.
S&F sheet metal enclosures, double door type, suitable for fixing MCB SPN with 200 Amps rated bus bar, 8 way, 240 volts complete all as specified and directed.
S&F MCB 63 Amps, triple pole & neutral, 415 Volts complete all as specified and directed.
S&F MCB 32/40 Amps, single pole & neutral, 240 Volts complete all as specified and directed.
S&F MCB 6-40 Amps, single pole, 240 Volts 'C' curve, 10KA ISI marked as per IS/IEC 60898-1 2002 complete all as specified and directed.
S&F sub main wiring on including passing throuh PVC conduit pipe 1100 volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 4 Sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 2.5 sqmm of green colour confirming to IS 694/1990 including taking down existing unserviceable sub main wiring. (Note : Two runs of cable with one run of earth wire and one run of PVC casing caping should measured as one length).
S&F sub main wiring on including passing throuh PVC conduit pipe 1100 volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 Sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 including taking down existing unserviceable sub main wiring. (Note : Two runs of cable with one run of earth wire and one run of PVC casing caping should measured as one length).
S&F 2nd class hard wood rectangular block open recessed of size 30cm x 25cm x 5cm depth with 3mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug (4 Nos) complete all as specified and directed.
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 50 sqmm 4 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
Supply, laying, jointing and testing XLPE insulated, armoured, heavy duty LT underground electric cable with stranded aluminium conductor 1100 volts grade cross sectional area 10 sqmm 2 core laid in trenches, along poles through pipes etc complete all as specified & as directed. (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately including taking down old unserviceable XLPE cable. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.
Excavation in trenches n.exc 1.5M wide and n.exc 1.5M in depth for foundation and getting out in soft/loose soil all as specified and directed.
Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm deep as in soft/loose soil copletete all as specified.
Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point.
M&L brick work with fly ash bricks {As per IS-13757 (1993) burnt clay fly ash building bricks}, (Old size bricks) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection complete all as specified & directed.
M&L dry sand (tibba sand) and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.
S&F single pole and neutral enclosure with two pin and earth plug and socket complete with 1 No single pole MCB 20 Amp including taking down complete all as specified & directed.
M&L 40mm grade GI pipe (light grade) for protection of LT cable fixed to wall /pole /road crossing including clamps complete all as directed.
Disconnecting from elect connection and taking down carefully the existing electric energy meter of any capacity, any make, any size and depositing the same in AGE E/M Store Yard all as specified and directed by the Engineer-in-Charge. Refixing the same inside the old meter inside box carefully including necessary electric connections complete all as directed.
Disconnecting from elect connection and taking down carefully the existing ceiling fan/exhaust fan/geyser of any capacity any make, any size and depositing the same in AGE E/M Store Yard all as specified and directed by the Engineer-in-Charge. Refixing the same ceiling fan/exhaust fan/geyser carefully including necessary electric connections complete all as directed.
M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mm x 3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed.
S&F ceiling fan 5 star rating 1200mm sweep 240V AC including provision of hook in ceiling of suitable size and necessary electric connection complete all as directed. Make : Havells/Crompton/Bajaj/Orient.
S&F voltage stabilizer of capacity 1 KVA for automatic operation, single phase, naturally air cooled, indoor type, designed for input variation between 90 Volt to 300 Volt with output voltage stabilized at 230 Volt with accuracy of ± 2.5% and connecting up all as per manufacturer’s instructions & as directed. Make : V-Guard, Microtek, Luminous.
Supply and install desert cooler in steel body with tank capacity of 120 Ltr, propeller type cooler fan with motor (ISI Marked) three speed 1440 RPM, 1/8 HP Copper winding, 230V, 50HZ, sealed double ball bearing, vacuum impregnated strator winding, One Year Warranty, silent operation, nominal capacity 4000 cum/hr, fan size 450mm, type of blade metallic (HIP), submersible water pump, filter pad, electric driven, single phase, 230 volts, 50 Hz, capacitor 4 mfd, suitable plug top 5/15 Amp including all accessories complete all as specified & directed Make : Bajaj/ Khaitan / Crompton. Note :- (i) Filter panels,front grill and top of the cooler body shall be made of 1mm galvanized steel sheet. The sump tank and rest of the body shall be made of 1.20mm thick galvanized steel sheet. The galvanised steel sheet shall be ISI marked and shall have zinc coating not less than 100 gms/sqm and shall conform to IS : 277. (ii) All internal surface including inside of the tank, fan blades, motor body, pump, pump body shall be painted with water resistant paint conforming to IS: 986. The outer surface of the cooler shall be spary painted with synthetic enamel paint of approved shade/tint. (iii) The desert cooler shall be fitted with adjustable grill with separate on/off switch of 5/6 Amp rating (ISI Marked) for cooler fan and water pump and three stage speed regulator (Low, Medium, High) for three speed cooler fan motor. (iv) Suitable nylon bushes shall be provided in the grill for easy and smooth movement of louvers. (v) The filter pads shall be contain wood wool.The filters pads shall be fixed over the panel and seured by clamping guard of galvanized wire of 2mm dia (approx) squre/rectangular.The wire guard shall be fixed in the clamps to avoid any sagging.
S&F 10mm thick toughened plain/frosted glass as in doors, partitions, automatic doors and similar works with and including cutting to shape, drilling holes, joining pins, cleats, clips/beads as required fixed with metal pins complete all as specified and as directed.
Supply and installation Water Cooler, storage capacity 80 litre, nominal cooling capacity 40 litre per hour, Partial Stainless Steel (PSS), electric driven, single phase, 230 Volt, 50 Hz, hermetic type compressor with suction gas cooled motor equipped with overload protector, propeller type (Quiet) condenser fan, automatically controls temperature thermostat, 02 Nos cold water taps, complete, all as specified. Make : Voltas / Blue Star / Usha Shriram
GAR CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .