REPAIR REPLACEMENT OF JOINERY WORKS AND CERTAIN B/R NATURE WORK AT VIKRAM BATRA VIHAR CMP LINE CAPTAIN LINE SUBRAMANIAN LINE BUTCHERY AND OFFICERS RATION STAND ORS IN THE AREA OF AGE BR II WEST UNDER GE WEST DELHI CANTT 10

Amount

Taking down door/window/ventilator frames with shutters not exc 1.50 sqm each (without taking off shutters from frame) all as specified.

Taking down door/window frames with shutters exc 1.50 sqm but not exc 4.00 sqm each (without taking off shutters from frame) all as specified.

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each complete all as specified and directed.

S&F anodised aluminium ventilator with aluminium anodised frame of aluminium section 62.50 mm x 37 mm x 1.5mm thick and with top hung shutter having style and rails of aluminium section 47.62 mm x 44.45 mm x 1.5 mm thick and shutter wire gauzed and bottom half portion of shutter fixed type and glazed glass pane without sash bars including necessary joining cleats,glazing clips,rubber packing, anodized, aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long, handles and 100mm long SS hinges etc complete all as specified and directed. Note : glazing, wire mesh shall be measured and paid separately against respective items.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars complete all as specified conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F fibre glass reinforced plastic (FRP) door frame (three legged) of cross section 90mmx45mm, single rebate of 32mmx15mm to receive shutter of 30mm thickness. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. The laminate door frame mould with fire retardant grade unsaturated polyester resin and chopped mat. MS stay shall be provided at the bottom to steady the frame as per specification & drawing complete all as specified.

S&F FRP door shutter 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per specification & drawing and as directed.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm wood grain printed PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and adirected.

S&F factory made PVC moulded door shutter 28 to 30mm thick (styles) with 2,4 or 6 raised panles design with 2mm thick 3D wood grain moulded PVC sheets pollyurethane painted on the front face and 2mm plain colour PVC sheets on back face complete all as specified and directed.

M&L for framed work as in door/vent/CB chowkats of angle or other section, frame work for chajja with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering and including cutting brick for hold fast. confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding complete all as specified and directed.

S&F plain framed panelled shutters, 35mm thick (any number of panels) with lock rails in IInd class HW and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003 as directed by Engineer-in-Charge.

S&F gauged skelton door shutter IInd class hard wood 35 mm thick rebated and prepared to received glass, gauge etc (without sash bars) edges of forming plain,chamfered or rounded fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc.complete all as specified and directed.

S&F 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed to frame as in shutters to cup boards etc including 18/19 x 2mm leeping/ beading all round shutters complete all as specified and directed.

S&F 1.00 mm thick plain black mild steel sheeting in as in door shutter covering including, welding or soldered joint complete all as specified and directed.

S&F 3mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane all as specified and as directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane including fixing upto second storey building window with necessary stair arrangement and safety arrangement to fixing upper glass panes complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia or wire and an average width aparture 1.18 mm and fixed with tinned tack/stainless steel wire stapple with screws complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10mm girth including preparation of surfaces complete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of pink primer on wooden surfaces of girth exc 10CM, including preparation of surfaces. complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges medium weight fixing with stainless steel screw complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled MS to pressed steel/angle iron frames complete all as specified and directed.

S&F 75mm long butt hinges medium weight cold rolled MS to pressed steel/angle iron frames complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm long aluminium handles cast type anodised ISI Marked complete all as specified and directed.

S&F 250mm long MS sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F hasp and staple size 75mm safety type, aluminium anodised, including bolt to hinge plate and fixed with screws all as specified.

S&F 200mm mild steel ordinary rat tail rod pattern springs includng roller and roller plate complete incl necessary welding if required complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone Aggregate) as in bed blocks for hold fast and coping bedding rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for Mild Steel work as in hold fasts complete all as specificed and directed

S&F with 3mm thick ordinary sheet glass fixed with clips and putty complete in squares not exc 0.50 sqm each pane and including hacking out old broken glass of any thickness/size of any description from wood/steel frame fixed with clips and putty and complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia or wire and an average width aparture 1.18 mm and fixed with tinned tack/stainless steel wire stapple with screws to wooden beads to wooden joinery, Cost of wooden beads / flat iron beads included in the rate, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:4 complete all as specified and directed.

All as per srl item No 35 above but except brick.

M&L Brick work with sub class 'B' brick staight or curved on plan to any radious in half brick thick wall built in CM 1:4 etc complete all as specificed and directed.

Taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces complete all specified and directed.

M&L for roughcast finish plaster i.e applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete all as specified.

M&L for 15mm thick rendering on concrete surface/brick surface in cement mortar (1:4) surface finished even and fair without using extra cement and using WPC as per manufacture's instructions plaster complete all as specified and directed. (Note : WPC will be measure and paid seperately). (Note : The cost of scaffolding required for repair is deemed to be in the quoted rate by the Contractor).

Supply only Liquid water proofing compound, complete all as specified and directed.

M&L 5mm thick rendering in CM 1:3 of ceiling finished fair even and smooth without using extra cement complete all as specificed and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L for applying wall care putty avg 2mm thick on wall / ceiling even and smooth surface complete all as specified and directed.

M&L preparation of surfaces and applying two coat of cement base paint over a coat of primer on external surfaces all as specified and directed.

M&L preparation of surfaces by complete removal of existing treatment & applying two coats of cement base paint on walls over a coat of primer all as specified & directed. Note : Colour / shade as approved by Engr in charge.

M&L preparation of newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.

M&L preparetion of old decorated plastered surfaces of walls etc by complete removal of existing treatment incl washing rubbing down and sopping of surface and applying two coats of oil emulsion distemper on wall surfaces complete all as specified and dircted.

M&L preparation old plastered surfaces of ceiling and applying one coats of white wash all as specified and directed.

Demolition of Water closet (Squatt pattern) including 'P' trap complete complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern' size 580 x 440 mm white with integral foot rests (excluding flushing cistern), including flush pipe of polyethylene of low or high density, connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete trap set in concrete and including CI 'P' Trap & 100mm cast iron sanitary connection socket to fit WC out-let complete all as specified and directed.

Taking down 10 Ltrs capacity PVC low level flushing cistern complete complete all as specified and directed.

S&F 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified

Dismantling floor, hearth or wall tiling incluidng cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the MOD premishes complete all as specified.

M&L Glazed ceramic tiles joint free coloured of size 450mmx300mm, 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 400mm x 400mm 6 to 7mm thick (square/rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 300mm x 300mm 6 to 7mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:6) laying floor finish complete all as specified and directed.

Demolition of reinforced cement concrete as in chajja, kitchen slab, chullah hood, chimney portion, manhole cover and similar work n.exc 15cm thick complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work ;not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concerete all as specified and directed.

M&L for reinforced cement concrete using type B-1, 1:2:4 (20mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like concerete all as specified and directed. (Note :- Steel reinforcement bars shall be measured and paid separately under relevant items)

S&F for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar.

M&L 20mm thick screed bed in cement mortar 1:6 as in sub base for Udaipur green marble complete all as specified and directed.

M&L for Machine cut Udaipur green slab 15 to 18 mm thick laid over Kitchen cooking platform and jointed in grey cement slurrry mixed with pigment to match the shade of the slab incl cutting, rubbing and polishing and making hole in the platform for gas connection complete and incl nosing of the edges half round (Stone slab shall fixed as in one piece) complete all as specified and directed.

S&F for sun shade pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour as approved having tensile strength of 550 Mpa as in roof covering/cladding to wall/chajja, fixed with self tapping screws as specified and including cutting chasing of wall, complete all as specified and directed.

Taking down all type of sink (chinaware sink/stainless sink), with drainage board/without drainage board complete.

S&F sink with drainage board made of stainless steel 0.8mm thick for kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 915mm X 460 mm, bowl size 410 mm x 330 mm x 160mm complete all as specified and directed.

S&F stainless steel sink of 0.8mm thick kitchen or loboaratory with plu, washer and wates, including bedding in cement morter to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size of bowl size 495mmX420mm bowl size 410mmX330mmX16mm complete all as specified and directed.

Taking down stain less steel plate rack any size complete all as specified and diected.

S&F stainless steel plate rack made of 0.60mm thick sheet of size 600x750x250mm fixed to wall with suitable rawl plug all as directed.

Taking down Wash basin any complete all as specified and directed.

S&F Vitreous China wash basin, white, flat back, size 550X400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repair 15mm dia Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly-nuts screwed for iron pipes and fixed all as directed.

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Angle valve) with crutch , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified and directed.

S&F 32mm dia CP waste coupling suitable for wash hand basin and sink complete all as specified and directed.

S&F in repair CP grating 100mm dia round hole/without hole fix on floor/ nahani trap fixed with cement paste, complete all as specified and directed.

S&F 32mm dia flexible waste pipe 1.20 m long complete all as specified and directed.

S&F in repairs 75mm bore cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Dismantling existing water tanks capacity exc 250 ltr but not exc 500 ltr complete all as specified and directed.

S&F 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20mm GI tank nipple suitable for HDPE water tank complete all as specified and directed.

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia complete all as specified and directred.

S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Taking up or down 15mm dia bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor complete in all respect as specified

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 15mm any grade to walls and ceiling or laying in floors

Taking up or down 20mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor complete in all respect as specified

S&F 20mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 20mm any grade to walls and ceiling or laying in floors

Demolition and breaking up drain pipes (SGSW, AC, PVC or reinforced cement) set in cement mortor internal dia of pipe 75mm to 110mm complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length including fixed with cement solvent with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length including fixed with cement solvent with rubber ring joints fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110mm size stack clamp made out of 25 mm X 3mm flat iron and 12mm dia round iron stamp incl bolts and nuts and securing ends of stamp to walls or roof complete all as specified and directed.

S&F in repair 75mm size stack clamp out of 25 mm X 3mm flat iron and 12mm dia round iron stays incl bolts and nuts and securing ends of stay to walls or roof complete all as specified and directed.

M&L painting one coat of synthetic enamel paints on old wooden surfaces of girth exc 10cm, including preparation of surfaces. complete all as specified and directed.

M&L preparation of old steel and iron surface any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level) all as specified.

M&L 75mm thick PCC (1:3:6) type C2 (using 20mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic filling of mix (1:2) (bitumen and sand) complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 (40 mm graded stone agg) as in Sub base for floor complete all as specified and directed.

M&L 20mm thick machine pressed coloured cement concrete chequred tiles of size 300x300mm in floors, set jointed in neat cement slurry and pointed with white cement and pigment over 15mm thick screed bed or bedding layer of mortar in CM (1:6) complete all as specified and directed.

S&F in repairs coloured PVC coated MS drapery curtain rod 28mm dia complete all as specified and directed.

S&F decorative finials of ABS plastic of suitable dia & in matching colour of curtain rod complete all as specified and directed.

S&F brackets of galvanized steel powder coated paint in matching colour suitable to curtain rod complete all as specified and directed.

M&L for welding in repair in any situation and in any position to steel door, gates, window, ventilatiors and grills etc complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 103537.50(Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

S GOURAV PRAKASH ENTERPRISES

M/s Haji Builders

Chandramauli Engineers Pvt. Ltd.

A S CONSTRUCTION CO.

JAIPAL and BROS