Provid to furniture in Govt Sr Sec School Ridmalsar Brani

Library Chair The seat & back shell of chair shall be injection moulded Polypropylene. Seat size 46.0Ccm(W) X 38.0cm (D) Back Size 41.0cm(W) X 40.0cm(H) Tubular Under structure- The tubular under structure is fabricated from dia 1.9+/-0.02cm X 0.1+/-0.008cm thick. SS tube welded together with SS connecting rod dia 08 (min.) cm. The under structure is provided with black PP injection moulded ferrules & and Sample of chair required

Library Table The product should be in complete knock down condition as much as possiblel feasible enabling case in transportation and assemblies within premises Top Size:-2300x1100 X 750mm (H) The Worktop will be made of 25mm thick MDF Board. Post forming on two longer side and two short Side PVC lipping 2.0 mm thick. The under structure is made from 38+0.3 mm X 38.0.3mm X 1.5 (min) mm thick MS tube with fine powder coated at base which are welded and are fixed to top with Chip board Screws. Under structure size 2220mm X 1020mm and 2 additional middle supports of 1020mm. The Bottom ends are closed with plastic buffers The cross members are made from 38+0.3mm X 38 40.3mm X1.5 (min.) min thick MS tube at base which are MIG welded and are bolled to side frames. The bottom stiffeners are connected with hexagonal bolts. All fabricated parts which require welding are MIG/Spot welded. The screw joining wooden panels to under structure are chip board screws and sand blasting powder coating required

Library Book Shelf glass Almirah Size shall be 916 mm (W) x 480 mm (D) x 1980 mm (H) Excluding levellers. It shall made of 0.7 mm thk(min) MS Sheet for Shelf, 0.8 mm thick MS Sheet for doors and back & 0.9 mm thick MS Sheet for all other components with fine power coated. Construction shall be welded construction. Locking and Handle-Brass handle, Two way locking mechanism with shooting bolt. Height wise 4 nas of Adjustable Shelf shall be provided with Uniformly Distributed Load Capacity per each fuli shelf is 40 Kg maximum. The approximate weight 70 kg +/-5% and sand blasting powder coating required

Library Book Rack Double Sided The product should be in complete knock down condition as much as possible/ feasible enabling case in transportation and assemblies within premises Product Size: Width 900mm, Height: 1850mm, Depth: 600mm Construction: Rigid Knockdown construction. Material: MS Sheet 0.8mm Thickness, Finish: With Fine Powder coated. Number of Adjustable shelf. Five adjustable shelves on one side (Total 12 Loading levels). Uniformly Distributed. Load Capacity per each shelf is 80 Kg maximum. Shelf back stiffener: At the rear side of the shelves back stiffeners are provided. These act as separators between front & rear books. Label holder & range Indicator: Label Holder & Range indicator on each main unit for inserting labels, and sand blasting powder coating required

Office Chair High Back Ergonomic Revolving Premium Finish Ultra Comfort Suitable For Office Use Frame Material Subtype PU Leatherette, Upholstery Material Leatherette, Upholstery Included, Upholstery Type Cushion, Chair Features Adjustable Seat Height, Armrest, Swivel, Wheels, Leatherette Finish, Ergonomic design for comfort and posture support. High-quality leather upholstery for a luxurious look. Adjustable features like height and recline for customization. Sturdy construction with a durable base and casters. Ideal for executive offices and long hours of work. Dimensions: Weight 13 KG Seat Width 45 CM,Seat Height 53 CM. Seat Depth 45 CM

Visitor Chair Ergonomic Leatherette Executive High Back visitor Office Chair with arm Rest with Steel Frame and Cushion sear Back, Chair Without Wheels Holds up to 150 kg.Stainless Steel Frame, Leather Upholstery Material, Upholstery Cushion Armrest STRONG AND DURABLE, No assembly requires Heavy duty chair

Steel Almirah Size shall be 916 mm (W) x 480 mm (D) x 1980 mm (H) excluding levellers. It shall made of 0.7 mm thk(min) MS Sheet for Shelf, 0.8 mm thick MS Sheet for doors and back & 0.9 mm thick MS Sheet for all other components with fine power coated. Construction shall be welded construction. Locking and Handle Brass handle, two way locking mechanism. Height wise adjustable 4 shelves shall be provided with uniformly distributed load capacity per full shelf to be 40 kg maximum. The approximate weight 70 kg +/-5% and sand blasting powder coating required

Class Room Table (Dual Desk) with Attached Chair Class LKG to 2nd The product should be in complete knock down structure as much as possible/feasible enabling case in transportation and assemblies within classrooms. The panels are made from 17±0.5mm thk Pre-Laminated MDF (IS 14587) with 1 mm PVC edge banding on all sides. Top Dimension shall be 965mm X 355mm. Top Height shall be 533mm. Seat Dimension shall be 970mm X 254mm. Seat Height shall be 296mm Back dimensions shall be 970mm X 152mm. Size may vary +/- 5mm. pipe should be isi marked The Under structure is Made of ERW tubes 25 ±0.3mm x 25 ±0.3mm x1mm ±0.096mm thk 25mm x 50mm 1.2mm thk #0.096mm thk side panel should be made by 0.510mm CRC iron Sheet inside the pipe frame powder coated 50microns(+10) at base which are welded to the desk and seat supports that are made of 25mm x 50mm 1.2mmthk ±0.096mm thk powder coated 50microns (±10) Stiffeners that are provided between the 2 vertical frames at base and back of seat are made from ERW tubes 25±0.3mm x 25±0.3mm x1mm ±0 096mm the front panel should be made by 17 ±0.5mm thk Pre-Laminated MDF (IS 14587) with 1 mm PVC edge banding on all sides The tubes are closed with plastic caps/iron sheet Additional horizontal supports of ERW tubes 25±0.3mm x 25±0.3mm x1.2±0.096mm thk powder coated 50microns (±10) are placed Between front legs and between back legs to add the rigidity of the structure The storage shelves are made from from 17±0.5mm thk Pre-Laminated MDF (IS 14587) with 1 mm PVC edge banding on all sides BASED on 25x25x2mm iron angel Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles. They are made from 60 mm dia MS rods powder coated 50microns (±10) The under structure is assembled using MS Trilobular Taptite screws. Nylon studs are provided on bottom side of RH/LH Frame All Fabricated parts which require welding are MIG/Spot welded The Screw joining Wooden Panels to under structure, are Chip Board Screws. All steel structural components shall be made from virgin material and. Recycled steel will not be accepted. All the 8 support should be joint side panel with 9mm screwse/elkey bolt and sand blasting powder coating required

Class Room Table (Dual Desk) with Attached Chair Class 3rd to 5th The product should be in completa knock down structure as much as possible/feasible enabling case in transportation and assemblies within classrooms. The panels are made from 17 ±0.5mm thick Pre-Laminated MDF (IS 14587) with 1 mm PVC edge banding on all sides. Top Dimension shall be 1015mm X 405mm Top Height shall be 635mm. Seat Dimension shall be 1015mm X 279mm. Scat Height shall be 349mm Back dimensions shall be 1015mm X 152mm. Size may vary +/-5mm. Pipe should be ISI marked The Under structure is Made of ERW tubes 25 +0.3mm x 25±0.3mm x1mm ±0.096mm thick 25mm x 50mm 1.2mm thk ±0.096mm the side panel should be made by 0.510mm inside the pipe frame powder coated 50microns(+10) at base which are welded to the desk and seat supports that are made of 25mm x 50mm 1.2mm thk #0096mm thk powder coated 50microns (+10) Stiffeners that are provided between the 2 vertical frames at base and back of seat are made from ERW tubes 25 +0.3mm x 25±0.3mmx1mm ±0096mm thk front panel should be made by 0.6mm CRC iron sheet powder coated 50microns (+10) The tubes are closed with plastic caps Additional horizontal supports of ERW tubes 25±0.3mm x 25±0.3mm x1.2 ±0.096mm thk powder coated 50microns (110) are placed Between front legs and between back legs to add the rigidity of the structure sides angel The storage shelves are made from 17 ±0.5mm thk Pre-Laminated MDF (IS 14587) with 1 mm PVC edge banding on all sides BASED on 25x25x2mm augel iron Hooks are provided on either sides of the vertical frame of the desk, for hanging bags/bottles They are made from 6.0 mm dia MS rods powder coated 50microns (10) The under structure is assembled using 15 Trilobular Taptite screws. Nylon studs are provided on bottom side of RH/LH Frame All Fabricated parts which require welding are MIG/Spot welded The Screw joining Wooden Panels to under structure are Chip Board Screws. All steel structural components shall be made from virgin material and. Recycled steel will not be accepted. All the 8 support should be joint side panel with 9mm screws/elkey bolt, and sand blasting powder coating required and also sample with Testing report MSME Lab Jaipur required

Student Table Iron under structure made by 25x25x1.2mm pipe with legs sport (footrest) 25x50x1.2mm pipe under structure size 400x560x740 with Pre-Treated Epoxy Powder Coated. Top made by MDF 18mm ply with PVC edge bending 1 mm top size 480x600mm. Top should be fixed on under stricture four head screw PVC shoe on legs and sand blasting powder coating required and sample required

Student Stool Iron under structure made by 25x25x1.2mm pipe under structure size 275x275x438mm Top made by MDF 18mm ply with PVC edge bending 1 mm top size 300x300mm. Top should be fixed on under structure four head screw PVC shoe on legs. Would you like me to organize these specifications into a table for easier comparison and sand blasting powder coating required also sample required

Principal office Table (LWH-1800x1050x750 mm) 19 mm MDF board/19mm plywood with 8mm sunmica one side three drawer with telescope heavy channel with lock side rack size 1524x800mm side cowd with keyboard top height 750mm

Lecture Stand Iron under structure made by 25x25x1.2mm with Pre-Tresied Epoxy Powder Coated. Under structure will be coved with 18mm MDF board PVC edge bending on three sides with one self size 1200x430x600mm

NEWS PAPER STAND The product should be complete known down structure as much as possible feasible enabling case in transportation and assemblies within library class room. The pancts should be made from 18/0.5mm thick pre laminated MDF board of dimention with top 762.0*609.6 mm with both side 2 mm put edge bending on all sides. Under structure is made MS square pipe 25*25*1.2 mm thick with powder coated, size of newspaper stand height 1371.6mm width 711.2mm, finish of metal shall be fine powder coated

Laboratory Table The product should be in complete knock down condition as much as possiblel feasible enabling ease in transportation and assemblies within premises. Top Size: 2300x1100 X 900mm (H). The Worktop will be made of 25mm thick MDF Board. Post forming on two longer side and two short Side PVC lipping 2.0 mm thick. The under structure is made from 3880.3 mm X 38 0.3mm X 1.5 (mm) mm thick MS tube with fine powder coated at base which are welded and are fixed to top with Chip board Screws. Under structure size 2220mm X 1020mm and 2 additional middle supports of 1020mm. The Bottom ends are closed with plastic buffers. The cross members are made from 3840.3mm X 3840.3mm X1.5 (min.) mm thick MS tube at base which are MIG welded and are bolled to side frames. The bottom stiffeners are connected with hexagonal bolts. All fabricated parts which require welding are MIG/Spot welded. The screw joining wooden panels to under structure are chip board screws and sand blasting powder coating required

Marble Plate

Labour cess or Labour Welfere 1 %

Please Enable Macros to View BoQ information