Design Manufacture Testing and supply of 2 Nos. 220 V DC 300 AH & 13 Nos.110 V DC 200 AH 15A float and 30A Boost battery chargers for 220kV and 66/11KV Stations under Transmission KPTCL BRAZ Bengaluru

The Bidder shall also furnish performance certificate of at least 50 percentage of Battery Chargers specified in the present enquiry OR higher voltage class issued by state owned Electricity utilities Generating utilities only and issuing officer shall not be below the rank of Executive Engineer or equivalent Division Head. The performance certificate shall be indicating the capacity, make, name of the sub Division where it is installed, date of commissioning etc in order to show that tendered materials equipments of this bid were in successful operation for at least One years as on the date of Supply Erection.

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years with KPTCL. A history of awards involving litigations against the Bidder or any part or JV may result in rejection of bid. The Bidder should furnish the self-declaration stating the above & upload the same along with the other documents in the relevant field in the E-procurement portal, failing which the offer is liable to be rejected

The bidder should not have been disqualified for non-performance in any of the Government utilities in the past five years. The bidder shall furnish a self-declaration to this effect failing which the offer is liable to be rejected.

The bidder should not have been blacklisted by any State/Central Generating/Transmission Utility as on the date of bid submission.The bidder shall upload a declaration in this regard and non-furnishing of the declaration will result in rejection of the Bid.

The bidder should have Goods and Service Tax GST Registration and shall upload the necessary supporting documents to establish compliance for having GST registration

The bidder or manufacturer of Tendered material/equipment shall have full-fledged service center in India for complete after sales service of the Tendered material/equipment. The complete after sales service of the Tendered material/equipment shall be provided within reasonable time and the same has to be guaranteed for the entire contract period. The bidder shall furnish the details of service center in India

The Bidder shall furnish Type Test Certificates not older than Seven years as on the date of bid opening for having conducted successful type tests in a NABL accredited test house as per the relevant IS standards on the equipment/material specified in the bid.(a)Bidders shall have to upload the type test certificates of the material/equipment specified in the present enquiry as per the relevant IS standards.(b)In case the type test reports for the specified equipment/material in the present enquiry are older than 5 years or if one/some of the type test reports are not available for the specified equipment/material in the present enquiry, in that case the bidder shall give an undertaking agreeing to conduct all type tests on the 1st Unit or any other unit at the discretion of KPTCL in a NABL Accredited Laboratory if order is placed on the firm without affecting the Delivery Schedule and at no extra cost to KPTCL.

The bidder should have manufactured at least 50 percentage of the quantity of Tendered material equipment. Bidders have to furnish the supporting Documents

The bidder shall be approved vendor of KPTCL. (Bidders have to furnish the supporting Documents)

The Bidder shall be a manufacturer and should have a minimum experience of 5years prior to this notification in designing, manufacturing, testing of equipments materials of either similar or both similar & higher rating/capacity to the one specified and being offered (Bidders have to furnish the supporting Documents).

The Bidder must be registered under Indian Company Act/1956 Indian Factories Act/1948 any relevant Indian Laws, whichever is applicable. In support, Certificate of Incorporation, GST registration certificates with GSTIN number and ISO certificate shall be furnished.

The bidder shall furnish EMD Declaration that the tender submitted will not be withdrawn or modified during the period of validity or extend period of validity as per format enclosed.The bidder shall upload a declaration in this regard and non-furnishing of the declaration will result in rejection of the Bid. Bids shall be accompanied by tender processing fee, for an amount as mentioned in the e-procurement platform, and Bid Security (EMD) for an amount of Rs. 41,937.00

The Bidder shall upload the power of attorney in the prescribed format on Rs.500/- Bond paper, and the Power of Attorney shall be sent in original to Superintending Engineer Electy., (Elec), Tr(M), BRAZ Circle, KPTCL, Bangalore so as to reach after the last submission date & on or before the date & time of opening Techno commercial Bids.The offer of the bidder shall be rejected in the following cases.i. If the Power of Attorney is furnished on the stamp paper of value below Rs 500.ii. In case the date of execution of Power of Attorney is not mentioned.iii. In case the date of execution of Power of Attorney is prior to the date of purchase of Stamp paper.iv. In case the Power of Attorney is submitted without the signature of the Power of Attorney holder and signature of the person who has authorized the Power of Attorney holder.v. In case tender documents including techno commercial sheets are signed by the different person other than the attorney holder or the person who has authorized the attorney holder.Bid Enquiry No. shall be clearly and legibly indicated in the Bank Guarantee.

In part or full price sheets or prices are exposed in the Techno-commercial sheets or Techno-commercial Bid of the Bidder then, the offer of the Bidder will be rejected.Documentary evidences wherever required shall be uploaded. No hard copies will be accepted except EMD & Power of attorney.

Minimum Average Annual Turnover (MAAT) of the bidder for best three years out of last five financial years ending on March or December as the case may be, shall not be less than Rs.62,90,580.00 In case bidder is a holding company, MAAT shall be that of holding company only (i.e. excluding its subsidiary / group companies). In case bidder is a subsidiary of a holding company, MAAT shall be that of subsidiary company only (i.e. excluding its holding company). The bidder shall enclose audited annual turnover statement by Charted Accountant for the preceding Three years issued to the company (i.e, for FY 2023-24, 2022-23, 2021-22).