SITC of 26 Passenger Bed Elevator work in Construction of Critical Care Block Building at Tonk

Supplying , installation , Testing and commissioning of the Passenger having following main features:

(a)MOTOR : Gearless lift drive comprising of high starting torque lift duty , 3 phase 440 Volts A.C. permanent magnetic synchronous motor (Located on shaft on top of guide rail ) of proper rating with high efficiency shall be used.

( c ) Traction Media: main hoist flat coated steel belt / rope . Thimbles of spring permit adjustment of uniform tension for smooth operation of the elevator Pulse belt monitoring system to avoid the cut in the belt.

(d) Car : car should be with M S platform with bracings of adquate size and to sustain the impact load cabin plus passengers with safety factor of fire for steel withAnti skid Granite flooring and side panels should be of Stainless steel with honey comb finish of sheet of grade 304 duty or higher with S.S. handrails on all three side . Car ceiling shall be steel finish with aesthetic appearances with LED ceiling lights (Ceiling light should be diffuser type) .The size of the car shall be taken as per available lift well size and relevant BIS code of lifts . Car panel will also be of S S 304 or higher grade finished with emergency stop device , emergency alarm,mechanical door safety device ,full length infra-red curtain in car door , facility of auto/attended mode . All car panel buttons and all floor switches must be with brail language as per lift act. Agency shall also provide & install one No. 2 MP , IR , IP based ceiling mounted Dome Camerain the car complete with connecting cables & accessories (To be connected with existing CCTV system in the Building by lift agency) .The inspection unit shall be provided at the top of the car.

(e)Landing Doors : All landing door shall be fully automatic centre opening made of honeycomb finish stainless steel grade 304 or higher with key holes and infrared curtains with unlocking facility from outside. The landing door should be fire rated (120 minuts)

(f) Emergency light: Appropriate rechargeable battery operated LED emergency light in the car and along with alarm switch shall be provided.

(g) ARD: Automatic rescue Device (ARD) shall be provided according to passenger capacity with SMF batteries of approved brands as per BSR.

(h) Audio-Visual Indication : Audio visual indication in the lift car , showing over loading such that doors kept open till excess load is removed.

(i) Scrolling Indicators: LED TYPE dot matrix scrolling indicator system for up-down arrow with floor position indicator shall be provided inside the car and at all stops/floors.

(j) Buffers : Spring buffers/PU Buffers shall be provided.

(k) Car Fan : ENERGY EFFICIENT cross flow Car fan/blower with automatic sleep timer shall be provided.

(l) Voice Annunciator: Voice annunciator with suitable music shall be provided in lift car.

(m) Self diagnostics system for operational and safety parameters shall be provided in control panel .

(n) Mechanical/Electronic over speed governor , door key holes in the floor doors, fireman switch shall be provided .

(o) Lift machine hoisting arrangement in the lift machine room , Cast Iron counter balance to promote smooth and economic operation complete with for the car & counter weight ,Trap Door , Lifting hooks as required and monkey ladders for lift pit should be provided by the agency along with all other steel structure works , foundations for the machine etc as required

(p) Permanent wiring in lift machine room and in lift well with providing and fixing of electrical distiribution board complete with SP ,RCCB,TP/FP MCB's etc , proper numbers of light points, with LED fixtures , exhaust fan , 2 nos copper plate /Carbon electrode earthing with 8 SWG copper earth wire and plug points shall be provided by the agency .

(q) All civil work related to installation of lift like finishing , cleaning and levelling of lift pit , white wash of lift well and in machine room shall be done by the lift erecting agency without any extra cost.

( s) Agency has to provide all working drawings and documents to comply latest BIS specifications and make proper liasion services for obtaining all necessary permissions Make as per Annx.

26 passengers BED Elevator/ 1768 Kg , (G+ 3) stops , rated speed adjustable up to 1.5 mtr /sec with 5 years comprehensive maintenance / DLP,With Machine room MR ),Honeycomb Finish S.S. Car and Honeycomb S.S. Landing door (Complete Lift Should be Honeycomb Finish )

BSR ITEM

Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR