Repair/Renovation of Govt. Qtr. no. 49-I, 16-C, 54-I, 11-S, 88-O, 131-U, 53-I, 29-E, and 121-U at Talab Tillo Poonch house, Jammu. CNO-574 NP

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 15.2.1

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. 15.56

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. 15.3

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:5:10 (1 cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size 4.5.8

CERAMIC GLAZED TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 8.31

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm) 8.2.2.2

P/F of 19mm thick ply including Cutting Wastage fevicole, Carriage, etc Complete itom of superior make ( Green Century, Amulya & Archid) Conforming BWP 710

P/F of 6mm thick ply including Cutting Wastage fevicole, Carriage, etc Complete itom of superior make ( Green Century, Amulya & Archid) Conforming BWP 710

P/F of 1mm thick Sunmica including Cutting Wastage fevicole, nail etc Complete itom of superior make ( Green, Amulya & Vigro)

P/F of 0.85mm thick Sunmica including Cutting Wastage fevicole, nail etc Complete itom of superior make ( Green, Amulya & Vigro)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood 9.10.4

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : First class kail wood 9.28.4.2

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately) First class kail wood 9.6.4.2

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 12 mm thick Marine plywood conforming to IS: 710 9.8.15

VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm 11.52.2

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown 11.50.1

P/F wardrobes with iron sheet hollow frame (4"x1/2"x2") with 24 gaug including Lock and handles ( Godrej) painting inside with plane paint & outside with texture paint (Asian , Nerolac) fixing of frame either 3inch Screw with drill & other complete work job

P/F of ACP Sheet 4mm thick

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460mm bowl depth 200mm 18.11.2.2

P/F Sink Mixer jaquar/cera/essco

P/F of angle Valve

P/F of wash basin with pedestal complete

P/F of towel rod

P/F of wall Mixer without hand shower Jaquar/cera/essco

P/F of centeral mixer of 15mm Dia Jaquar/cera/essco

P/F of short body bib cock Jaquar/cera/essco

P/F of Glass Shelve 600mm Thick glass with complete fitting

P/F of C.P Grating 4"

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Oval shape 450x350mm (outer dimensions) 18.32.3

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid 18.2.1

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 18.1.2

P/F SS Soap case

P/F of Seat Jet Complete

P/F of SS Handles 6"

P/F of Towel Ring Complete

P/F of Hand Shower Jaquar/cera/essco

P/F of Head Shower With arm Jaquar/cera/essco

P/F sliding Channel 20"

P/F of Auto Hinges

P/F of edge tape

P/F SS Pawa 4"

P/F of PVC Flexible type Waste Pipe for sink and wash Basin

P/F of PVC pipe 3inch dia

Engaging welder including the hire charges welding set & helper for miscellaneous welding work at site

G.I. PIPES AND FITTINGS Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore 19.4.1.2.1

P/F of PVC Panelling on walls 8 to 10mm thick including all fitting fixture complete (wall affair or any equivalent make)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 13.100

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. 13.52

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick 13.88.1

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work 13.106

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work 13.107

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 25 mm dia ( heavy type) 9.47.2

Engaging Labour for Dismentling the floor tiles and cleaning the site after execution of work

Engaging Carpenter for minor repair work at site

Engaging Trolly for disposal of malwa after execution of work from site

P/F of Aluminium Partition with powder coted almunium frame, ACP sheet, Glass & Door where ever required Including all fitting & Fixture Required for door for balconies and portion in existing rooms complete job including the cost of material & labour.

P/F of Wall paper of required colour Shade & design of Standard make

P/F of powder Coated Sheet For Various Works.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

P/F of 4mm Thick Straight Line teak ply including cutting, wastage, fevicol, nail,carriage etc. complete. (Green, century, archid)

P/F of Bath Corner glass/plastic of standard brand

Providing and fixing factory made flush door shutters 30 mm thick made of pre-laminated flat pressed three layer particle board conforming to IS: 12823 exterior grade (Grade I Type II) having one side decorative lamination of approved shade and other side balancing lamination including second class teak wood lipping of 25mm widex12mm thick with necessary screws and black enameled M.S. butt hinges complete as per directions of Engineer- in-charge 9.133

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.19.3.2 Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 25mm nominal outer dia pipes.(Internal work)

25mm nominal outer dia pipes.(External work)

P/f handjet with complete job

Please Enable Macros to View BoQ information