Road Saftey Work On Pihani Budhagaon Kulhaghat Road ODR Length 8-45 KM in Dist- Hardoi

Providing and applying tack coat with bitumen using Bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. (Rumble strip) (Including Labour Cess and Excluding G.S.T)

Providing and laying bituminous concrete with 60-90 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects.(Rumble strip) (Including Labour Cess and Excluding G.S.T)

Providing and laying hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 the finised surface to the level ,uniform and free from streaks and holes. (Zebra Crossing) (Stop Line) (as per PWD SOR Lucknow 2020-21 Item No MORT & H-803(8.13) (Including Labour Cess and Excluding G.S.T)

Providing and laying hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500gms pe sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 the finised surface to the level ,uniform and free from streaks and holes. (Thermoplastic bar marking) (as per PWD SOR Lucknow 2020-21 Item No MORT & H-803(8.13) Base (Including Labour Cess and Excluding G.S.T)

SINGLE CHEVRON BOARD Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. (as per PWD SOR Lucknow 2020-21 Item No MORT & H-801(8.4) (VIII) (Including Labour Cess and Excluding G.S.T)

Supply, fixing & eraction of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 90x90M of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect The Rates shall include cost of design fabrication, supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes royalty, VAT etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge. (as per PWD SOR Lucknow 2020-21 Item No MORT & H-802) (Including Labour Cess and Excluding G.S.T)

Retro Reflective Signs Providing & fixing of reflective signs with a corrosion resistant 4 mm thick aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2010 retro reflective sheeting with MS angle frame of 35x3.(as per PWD SOR Lucknow 2020-21 Item No MORT & H-801) (Including Labour Cess and Excluding G.S.T)

Please Enable Macros to View BoQ information