SPECIAL REPAIR TO BLDG NO P-101 (JCOs OTM ACCN) AT CMM JABALPUR UNDER GE (EAST) JABALPUR

Amount

Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed.

Removal of existing deteriorated / decayed tarfelt or any treatment of any thickness including loose surface scrapping with scrapper, chiseling/ scrapping of surface with wire brush or any other method and removing the scrapped materials /debris to a distance n.exc 50m depositing where directed complete all as specified

M&L cutting out cracks to V section in existing roofs/wall or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and as directed.

Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed.

Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for Brickwork with sub-class 'B' fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on internal surfaces of wall, finished even and smooth without using extra cement complete all as specified & directed.

M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja/roof, mixed with liquid water proofing compound as per Manufacturer's' instructions, surface finished even and smooth without using extra cement complete all as specified & directed. ( Note : Liquid water proofing compound will be measured and paid for separately against relevant item of BoQ)

M&L for 5mm thick rendering in CM (1:3) as on ceiling, soffit of RCC shelves, surfaces finished even and smooth without using extra cement complete all as specified & directed.

Supply only liquid water proofing compound, ISI Marked, of Make as approved by GE, complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed.

M&L for light shade vitrified floor tiles, minimum 10mm thick (square/ rectangular), area of each tile not exc 0.36 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed.

All as per Srl item No. 12 above but in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tile, over and including 10mm thick rendering in CM (1:4) complete all as specified & directed.

M & L non skid ceramic coloured & designer tiles 7 to 8 mm thick (square or rectangular ) area of each tile exc 0.11 sqm but n. exc 0.18 sqm,in floors, laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified & directed.

M & L glazed ceramic coloured & digital tiles 450x350x7 mm thick on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white/coloured cement to match with the shade of tiles over and including 10mm thick rendering in CM (1:4) complete all as specifed and directed

M&L for machine cut kota stone slab as in flooring, 18-20mm thick over & including 15mm thick cement screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M&L for machine cut kota stone slab as in skirting/ vertical surface, 15-18mm thick over & including 10mm thick rendering in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and mirror polishing complete all as specified & directed.

M & L Plain Cement Concrete (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in filling of undulation on the roof top/chajjas complete all as specified and directed

M & L 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in plinth protection, laid in panels, including forming construction joints (30mm deep x 10mm wide) filled with sealing compound Gde 'A' , finished even and fair without using extra cement complete all as specified and as directed.

M&L for applying evenly tack coat of hot blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm after cleaning the surfaces over & including a coat of bitumen primer @ 0.30 litre/ sqm consisting of 3/4 part bitumen of grade 85/25 and 1/4 part of kerosene oil on the top of prepared roof surfaces complete all as specified & directed.

M&L for unrolled over the bitumen coated surface, 3mm thick spun bonded non-woven polyester reinforced APP modified water proofing membrane weighing not less than 3.0 Kg/Sqm with minimum side over lap of 100mm and end over lap of 150 mm shall be sealed by flame as per manufacturer's instructions complete all as specified & directed. Note:- Suitable embedment of APP modified water proofing membrane shall be ensured into walls/parapet walls, special care shall be taken in laying APP modified water proofing membrane in situations such as drain/ expansion joints etc.

M&L for applying a coat of bituminous aluminium paint @ 100gm/ sqm over non-accessible roof and blinding material such as dry sand @ 0.75Kg/ Sqm over & including a coat of hot air blown bitumen 85/25 grade conforming to IS-702 @ 1.20 kg/sqm over polymeric membrane complete all as specified & directed. Note- Bituminous aluminium paint shall be of same manufacturer as specified for polymeric water proofing membrane.

Dismantling of water tank of any description of capacity exc. 250 litres but not exc. 500 litres, removing to store or from the site complete all as specified and as directed.

Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank, double layered, (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified & directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 15mm bore of pipe complete all as specified and as directed.

S&F 15 mm bore steel tubes ISI marked galvanized medium grade with all fitting fixed to wall, ceiling or laid in floors complete all as specified and directed

Refixing 15mm bore old steel tubing and connecting in new or old position as directed in walls, ceiling or floor etc complete all as specified and directed. ( Note : Old serviceable GI pipe retrieved against dismantling shall be re-used)

Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 20mm bore of pipe complete all as specified and as directed.

S&F 20mm bore steel tubes ISI marked galvanized medium grade with all fitting fixed to walls, ceiling or laid in floors complete all as specified and directed

Refixing 20mm bore old steel tubing and connecting in new or old position as directed in walls, ceiling or floor etc complete all as specified and directed. ( Note : Old serviceable GI pipe retrieved against dismantling shall be re-used)

S&F, in repair, 15mm bore concealed brass CP stop cock screwed both ends for iron pipe or for unions complete all as specified and directed

S&F, in repair, 15mm dia stop valves, cast copper alloy screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed

Supply and fix, in repair, 15mm dia stop valves/ angle cock, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromium plated, screwed both ends for iron pipe or for unions complete all as specified & directed.

S&F, in repair, 20mm dia 'D' type 60cm long brass CP tubular towel rail complete all as specified and directed

S&F, in repair, 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, long body, screwed down for iron pipe or brass ferrule complete all as specified & directed.

Supply & fix, in repair, vitreous china wash down water closet pan (pedestal pattern) coloured (excluding fixing bolts, flushing cistern and flush pipe) but with and including plastic water closet seat, black/ white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified & directed.

Supply and fix in repair 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed.

S&F, in repair, brass chromium plated wash hand basin mixer of mixing hot and cold water, suitable for 15mm bore pipe complete all as specified & directed.

S&F, in repair, 15 mm dia brass CP wall mixer unit for mixing hot & cold water, screwed down for iron pipe and fixed complete all as specified & directed.

S&F 15 mm bore PVC connection with PTMT nuts, of length 600 mm complete all as specified & directed.

S & F, in repair, 20 mm bore ball brass valve, high presure, with polyethylene float and fly nut, epoxy coated aluminium rod ,screwed for iron pipe or brass ferrule and fixed complete all as specified & directed.

M&L, in repair, CP shower rose with swivel joints, 125mm dia, including fixing to steel pipe or union, complete all as specified and directed.

S&F, in repair, vitreous China Wash hand basin, white, flat back, size 550 mm x 400 mm size excluding taps, chain & plug & porcelain stopper but including brackets, 32 mm dia PVC waste pipe, chromium plated coupling 32 mm dia & cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S&F PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory in colour, size (622 x 422mm) complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, head, shoes, bends, swan-necks atc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed

Supply and fix 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ ceiling with & including necessary clamps of requird size etc complete all as specifed & directed.

Supply and fix 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ ceiling with & including necessary clamps of requird size etc complete all as specifed & directed.

S&F 110mm bore PVC(SWR) bend of any radius provided with access door complete all as specified and directed

S&F 75mm bore PVC(SWR) bend of any radius provided with access door complete all as specified and directed

S&F 110mm bore PVC(SWR) junction single, (single 'T'), equal or unequal provided with access door complete all as specified and directed

S&F PVC 75mm bore (SWR) branch piece, single (Single Y), equal or unequal complete all as specified and directed

S&F PVC 110mm bore (SWR) branch piece, single (Single Y), equal or unequal complete all as specified and directed

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed

S&F,in repair, Harrison rails, Mild Steel, chromium plated curtain rod with fixing bracket, stops, rollers etc. complete all as specified and directed

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed.

Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty /wooden beads in square n. exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 3mm thick frosted glass pane one side and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr in each pane complete all as specified and directed by Engr-in-charge.

S&F Pressed steel frames for doors, size of frame (105x60mm), with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete, as specified and directed.

S&F Pressed steel frames for doors, size of frame (125x60mm), with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete, as specified and directed.

M&L for Plain Cement Concrete (1:3:6) type C-0 using 12.5 mm graded crushed stone aggregate as in back filling etc and similar work including necessary form work complete all as specified and directed.

M&L for mild steel work conforming to Fe-290 Gde -165 as in hand rail, holdfast, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars for doors, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat of synthetic enamel paint of colour as approved by GE over and including a coat of pink primer complete all as specified & directed.

S&F 35mm thick flush shutters, factory made, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. ( Note : The unit rate quoted by the Bidder is deemed to include for provision of suitable blocks for taking mortice locks, latches , or other fittings)

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator factory made with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe- 290 ( Gde-E-165) complete all as specified and as directed. Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts). No claim whatso ever shall be entertained by Govt on this account.

M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately as "Supply only".

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F, Solid PVC wall Lining consisting of 5mm thick prelam PVC sheet on one side inclusive of solvent cement and preparing existing surface and fixing at site as on cupboard etc complete all as specified and directed.

S&F 18mm thick prelaminated coloured solid PVC sheet suitably fixed in Mild Steel angle iron frame work as per specification and as directed. ( Note : Mild Steel Frame work shall be measured and paid for separately).

S&F 12mm thick prelaminated coloured solid PVC sheet suitably fixed in Mild Steel angle iron frame work as per specification and as directed. ( Note : Mild Steel Frame work shall be measured and paid for separately).

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm thick single side prelam PVC sheet, reinforced with MS square tube, fixing in same opening complete as all as specified and directed. ( Note : Edges of solid PVC door frame will be painted to match with prelam sheet)

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed.

S&F, in repair, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Supplying & fixing 300mm size ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified & directed.

S&F , in repair, safty type, mild steel hasp and staple with MS pin hinges including bolt to hinge plate and fixed with screws, of 125 mm size complete all as specified and directed.

S&F 300mm long Mild Steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed

Supply and fix 150mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

Material and labour mild steel barrel tower bolts, stove enamelled black with bright bolt, 200 mm long, ISI marked, complete all as specified and directed.

Supply and fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified & directed.

Supply and Fix aluminium handles 150mm size, cast type, anodised complete all as specified & directed.

Supplying & fixing 100mm size butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, type C-21 complete all as specified & directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete including removal of debris to out side MD land complete all as specified & directed.

M&L for reinforced cement concrete (1:1.5:3) type A-1 (using 20 mm graded crushed stone aggregate) (Nominal mix) , in chajjas,fascias, fins including necessary form work etc complete all as specified & directed.

M&L for reinforced cement concrete (1:1.5:3) type A1 (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified & directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 8 mm dia as in stirrups, spacers and binders for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates complete all as specified & directed.

M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer as approved by GE complete all as specified & directed.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper, oil emulsion, white or tinted, with and including 2mm thick wall care putty and one coat of appropriate primer complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for removing existing treatment of any description completely by wire brushing and washing the surface with water thoroughly and applying two coats of exterior acrylic emulsion base premium quality weather coat exterior anti fungal paint over a coat of primer on external plastered surfaces after applying external wall putty complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, holder, bell, bell push,regulators, sockets etc removing materials for taking credit etc all as directed.

Taking down unservicable/partly unservicable light fittings any type, tube light fitting and fixtures, etc, complete all as directed.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position complete all as directed.

Taking down sub main wiring of any size/capacity complete all as specified and directed

M & L for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 20 mm with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as specified & directed. Note : (1) Making good to match with the adjoining surface shall be included in the unit rate. (2) Rate is inclusive of Cutting/chases of wall/floor/ceiling.

(a) One light point controlled by one way switch 5/6 Amp

(b) One ceiling /exhaust fan point controlled by one switch and regulator 5/6Amp

(c) One 3 pin 5 amp socket outlet point on the same board with other switches.

(d) One 3 pin 5 Amps socket out let point on independent board

All as per same in item No 101 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.

Supply & fix switch piano, flush type single pole, one way 5/6 Amps, 240 volts complete all as specified & directed.

S &F Socket outlet, 2 in 1, 5/3 pin, 5/6 Amp complete all as specified and directed.

S &F Switch socket combination 5 Amps 5 pin flush type all as specified and directed.

S &F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal complete all as specified and directed.

Supply & fix ceiling rose, surface bakelite, 65x50mm surface type, two to three terminals, AC 240 volts complete all as specified & directed.

S & F Lamp holder insulated body with back plate including LED bulb 9 Watt complete all as specified and directed.

S & F stepped type electronic fan regulator 100/120 Watt, flush Type on the existing phenolic laminated sheet complete all as specified and directed .

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat shrink envioromental friendly Energy efficient, ready to use pack ,1x20/18 Watt ,4 feet,surface mounting type extruded PVC, snap on installers and domestic electronic Driver ,connector block etc with all accessories intenally prewired & including conecting up with 2 core flexible copper conductor cable of suitable size & length and mounting clamps, PVC square box 75x75mm - 2 Nos etc complete all as specified and directed.

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat shrink envioromental friendly, Energy efficient, ready to use pack ,1x10 Watt ,2 feet,surface mounting type extruded PVC, snap on installers and domestic electronic Driver ,connector block etc with all accessories intenally prewired & including conecting up with 2 core flexible copper conductor cable of suitable size & length and mounting clamps PVC square box 75x75mm - 2 Nos etc.complete all as specified and directed.

Supply & fix, in replacement, LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75+ 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens including mounting bracket made out of GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint complete all as specified and as direced .

Taking down existing exhaust/ ceiling fan of any size/ sweep for keeping the safe custody and re-fixing/ re-hanging the same after repair work or as directed and connecting up the same with & including twin twisted copper flexible wire from ceiling rose to exhaust/ ceiling fan complete all as specified & directed.

M&L for provision of sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 6 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed. Notes:- (i) Finished sub main wiring with four runs of 6.0 sqmm cable & one run of 6 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length. (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. (iii) Colour coding for wiring/ bus bar/ main connection shall be followed .

M&L MCCB DB vertical type made of sheet steel , powder painted with Neutral bus bar 200 A, neutral link, IP-43, IK-09 protection grade , 415Volts TPN, 4 way Double door complete all as specied & directed NOTE :- (a) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall./ DB to be fixed on wall including frame made out of MS flat 40x5mm. (b) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

M&L MCB DB made of sheet steel , powder painted with Neutral bus bar 200 A, neutral link, earth bar and Din rail ,240Volts SPN with 8 way Double door , IP-43-IK09 protection grade all as specied & directed Make : L&T CAT NO-LTSD08GN/ / LEGRAND CAT NO-607711/ equivalent of ABB NOTE :- (a) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall./ DB to be fixed on wall including frame made out of MS flat 40x5mm. (b) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

Supply & fixing MCB SPN 240 Volts, 'B' series, breaking capacity 10 KA, 6-32 Amps complete all as specied & directed

Supply & fixing MCB SP 6-32 Amps 'B' series, breaking capacity 10 KA complete all as specied & directed.

Supply & fixing MCCB 4 Pole 160 Amps , 415Volts, 36KA , thermal and magnetic release adjustable type complete all as specied & directed.

M&L for earthing complete with galvansided steel earth plate electrode 600x600x6.0mm thick directly burried in the ground (earth pit not less than 2.25M deep below ground level) with top edge of earth plate not less than 1.50M deep below normal ground level, connected to galvanised iron wire 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear including 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS/ GI bolts & washers as required and connection from earth test point to earth electrode with same GI earth wire alongwith protection pipe and testing on completion complete all as specified and directed. Note:- GI wire and protection pipe from earth electrode to test point max upto 7.50M shall be deemed to be included in the unit rates as quoted by the contractor.

Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 35sqmm, 3.5 core including jointing materials such as cable glands & lugs etc including taking out old unserviceable cable complete all as specified and directed.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed.( Note : Punned thickness shall be considered for payment purpose)

Supply and laying un-reinforced precast concrete cable covers, Class HV, type1, flat, size 300 mm x 180 mm x 40 mm, complete all as specified and as directed.

Schedule of credit amount of Rs. 77,045.00 to be deducted during AOC

Goodluck Enterprises

a k builders