Rewiring of certain bldgs including replacement of old unserviceable wiring, earthing bldg panels and bldg LT UG cables under GE Gurdaspur.

Amount

Taking down/out existing aluminium/copper point wiring for light, fan, bell, socket complete including all fittings such as switches, sockets,ceiling roses, regulators, light fittings etc and removing the materials from site complete all as specified and directed

M&L Point wiring with PVC insulated, and PVC sheathd multistranded FRLS copper conductor cable of size 1.5 Sqmm including in concealed PVC conduit pipe and fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 Sqmm dia to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to existing CI/MS boxes for mounting of accessories like surfaces sockets and regulators complete all as specified and directed.

All as per Srl item No 3.00 here-in-before but in existing PVC conduit.

All as per Srl item No 3.00 here-in-before but for one 5 pin socket outlet, 5 amps on independent board.

All as per Srl item No 3.00 here-in-before but for one 5 Amp socket in existing.

All as per item Srl No 3.00 here-in-before but for one 5 pin socket outlet, 5 amps on the same board with other switches.

All as per item 3.00 here-in-before but one light point controlled by two way switches.

M&L Point wiring with PVC insulated and PVC sheathed multistranded FRLS copper conductor cable of size 2.5 Sqmm including in concealed PVC conduit pipe and fittings and making good to the disturbed surfaces with continuous earth wire of copper 2.5 Sqmm dia to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to existing CI/MS boxes for mounting of accessories like surfaces one 15 Amps, 3 pin sockets outlet independent point controlled by one way switch complete all as specified and directed.

All as per item Srl No 9.00 here-in-before but in existing PVC conduit.

M&L sub main wiring with two single core PVC insulated, unsheathed, stranded copper conductor cable, FRLS of size 6 sqmm (84 x 30) and one PVC insulated, unsheathed, copper conductor cable, FRLS, of size 4 sqmm as earth wire fixed in and including concealed non matalic PVC conduit of appropriate dia complete all as specified. Make :- Havells, Polycab, HPL. (Note :- Three run of cable along with PVC conduit together shall be measured as single run)

M&L sub main wiring with two single core PVC insulated, unsheathed, stranded copper conductor cable, FRLS of size 4 sqmm and one PVC insulated, unsheathed, copper conductor cable, FRLS, of size 2.5 sqmm as earth wire fixed in and including concealed non matalic PVC conduit of appropriate dia complete all as specified. Make :- Havells, Polycab, HPL (Note :- Three run of cable along with PVC conduit together shall be measured as single run)

S &F switch piano flush type single pole 1 way 5 Amp complete all as specified and directed. Make :- Havells, Indo Asian, Standard.

S&F socket outlet 5 pin 6 Amps flush type complete all as specified and directed. Make :- Havells, Indo Asian, Standard.

S&F switch flush type 15 amps single pole type one way complete all as specified and directed. Make :- Havells, Indo Asian, Standard.

S&F socket outlet 5 pin 15 Amps multipurpose fliush type complete all as specified and directed. Make :- Havells, Indo Asian, Standard.

S&F bell push flush type single pole one way 5 Amp complete all as specified and directed. Make :- Havells, Indo Asian, Standard.

Taking down ceiling fan, sealing cable end, dismentling blades and removing fan and blades and kept in safe coustedy/ store complete all as specified and directed. Make :- Havells, Indo Asian, Standard.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose to connector of fan complete all as specified and directed. Make :- Havells, Indo Asian, Standard.

S&F in replacement fan regulator electronic type 5 step and connecting complete all as specified and directed. Make :- Havells, Indo Asian, Standard.

S&F on 2 PVC square blocks surface mounting universal batten housing made of powder coated CRCA sheet suitable for upto 1 x 18/20 W LED tube rod single sided and taking down old unserviceable fitting complete all as specified and directed of CAT part No REGALBATTEN8UPTO1X22WSSBSWH of Havells or equivalent in Bajaj/ Crompton.

S&F LED tube light 20W (single sided connection) ultra bright LED polycarbonate tubelight with very high efficacy suitable for fitting into existing/ new tube light batten fitting complete all as specified and directed of Havells or equivalent in Bajaj/ Crompton. Note :- The contractor will submit the LM-80 and LM-79 report from manufacturer to Engineer-in-Charge before incorporating the items in work.

S&F lamp holder with LED retrofit lamp suitable for lamp holder base of 9 watt complete all as spcified and directed.

M&L ceiling rose, surface bakelite to three terminal complete all as specified and directed.

S&F in repair sheet metal enclosure for DB's when MCB's to be used of 240 volt 8 way with 200 amps rated bus bar SPN double door complete all as specified and directed. Make :- Havells, HPL , Legrand.

S&F in repair sheet metal enclosure for DB's when MCB's to be used of 240 volt 4 way with 200 amps rated bus bar SPN double door complete all as specified and directed. Make :- Havells, HPL , Legrand.

S&F in repair MCB single pole 6 amps to 32 amps, C series complete all as specified and directed. Make :- Havells, HPL , Legrand.

All as per Srl item No 27 above but single pole and neutral 6 to 32 amps, C series complete all as specified and directed. Make :- Havells, HPL , Legrand.

S&F electric bell 230 volts Ding Dong complete all as specified and directed. Make :- Anchor, SSK, CONA.

S&F switch piano 5 Amp 2 way complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 3.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 mtr below ground level earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common saft filling in alternate layers and electrode connection by using earth lead GI wire 4mm dia ( 8 SWG) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and other end of the earth wire connected to main switch board protected by galvanised iron light grade pipe 15mm bore in wall/floor/and GI Pipe 20mm bore light grade for watering with funnel and wire mesh PCC chamber in cement concrete 1:3:6 type C-2 and RCC pit cover including necessary excavation and earth work in any type of soil, returning slurry approved soil and disposed of surplus soil to a distance not exceeding 50 Mtr away all as shown in electrical plate No 3 of SSR 2009 ( Part-I).

Taking out existing old unserviceable distribution box /sheet metal enclosure off size and making good disturbed surfaces complete with same colour.

Material and labour for replacement of distribution board made out of CRCA sheet DB vertical type double door TPN 4 Way MS sheet including fixing in the wall,cutting chases grounting and necessary patch work and white wash to match with the existing including making connections all as directed containing the folowings makes:- legrand/ L&T/ Siemens/ HPL. (a) MCCB 4 Pole 100 Amps 16 KA breaking capacity with thermal release 01 No (In coming) (b) Bus bar 200 Amp rated mode out of Aluminium on insulated duly insulated wire adhesive tape RYB & black-4 Nos (c) MCB SPN 63 Amp-02 Nos,MCB SP 32 Amp-08 Nos (Out going) (d) Connection from MCCB to bus bar will be made with Aluminium Strip suitable size as directed

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel stip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core complete all as specified and directed.Make :- Havells, Polycab, CCI

Excavation in trenches in soft loose soil including cutting road surfaces n.exc 1.5 mtr wide and n.exc. 1.5 mtr in depth for poles, stay, cable, pipe etc getting out all as specified.

Returning filling including spreading and well ramming in layers each n.exc 25 cm thick in soft loose soil all as specified.

Removing excavation material n. exc 50 mtr and depositing wher directed at a level n. exe 1.5 mtr above the starting point.

Supply and lay brick common burnt sub class "B" old size and for protection of cable laid in trenches for under ground cable all as specified.

M & L sand cushioning in trenches using fine sand to under ground cable, laid in two layers 15cm before laying the cable & 8cm after laying the cable complete all as specified and directed.

M&L for cable protection GI tubing light grade fixed on the pole/under road/along the wall of size 50mm bore with necessary clamps all as directed.

Supply and fixing aluminium conducter ,service wire of size 10 sqmm ,2 Core Make - Plaza, Kalinga , Polycab

S&F in repairs LT panel board, indoor type made of 2mm this CRCA sheet compartment type mounted on 50mm x 50mm x 6mm angle iron frame , 45cm above GL, fixed on panel floor including gouting in foundation having independent opening for each compartment at front and rear opening for panel duly painted with two coat of powder paint over a coat of red oxide primer, rewired with copper conductor wire made by CPRL approved firm making connection complete with and including following :- (i) MCCB 125 Ampo, 4 pole 25 KA, 50 Hz -01 Nos (incomping) (ii) MCB SPN 32 Amps, 16 KA, 50 Hz-04 Nos(Outgoing) (iii) Bus bar chamber with aluminium bus bar TPN complete with multifuctioning meter on incoming for voltage , current and power 4"x4" size prewired -02 Nos. (iv) Energy meter 10 to 60 amps, 240 volts, LCD display conforming to IS 13779 -04 Nos. (v) Cable lugs and rubber bushes for incoming and outgoing circuites all as specified and directed by Engineer-in-Charge. Note :- Lt Panel board drawing has to be submitted for approval by contractor to Engineer-in-Charge before supply.

P S BUILDERS

Sharma Electrical and Engineering Works

kailu construction co

M/S Vijay Punj Constructions