SPECIAL REPAIR TO BLDG NO P-49 OR MD ACCN AT RATNUCHAK UNDER GE KALUCHAK

Amount

B&R PORTION:- Taking down chowkhats or frames ( without taking down shutters from the frame) not exceeding 1.5 square metre each and removing from site complete all as specified.

Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.5 square metre but not exceeding 4 square metre each and removing from site complete all as specified. Note for item No-01 & 02:- The distrubed surface during taking down shall be made good by the contractor without any extra cost for fixing new one of any description. No extra coct is permissble for the material and labur for making good the disturbed surface.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each etc after resecuring or easing & adjusting complete all as specified and as directed.

Taking down door shutters of any description area exc 1.00 sqm and not exc 2.00 sqm, complete all as specified.

Taking down door shutters of any description area not exc 1.00 sqm, complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified.

Brushing neat cement slurry with 3.0kg of cement per sq. metre on concrete surface, complete all as specified.

Demolition of cement concrete of any description at any floor (including sunken floor pcc) not other wise described, complete all as directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for) and removing unserviceable material outside cantt area, complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning, threading for refixing if required or removal to store, complete all as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning, threading for refixing if required or removal to store, complete all as directed.

Taking up or down 25 mm bore steel tubing and connections including cleaning, threading for refixing if required or removal to store, complete all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tile to store and rubbish off the premises, complete all as specified.

PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Brick work using sub class B bricks in half brick thick walls straight or curved on plan to any radius built in CM 1 : 4, complete all as specified.

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification & drawing, complete all as specified.

Factory made solid PVC Moulded door shutter 28 to 30mm thick (style) with particle board core & with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face , supplying & fixing in the frame at site as per specification in SSR Part-I, complete all as specified.

Aluminum anodized barrel tower bolt of extruded section and fixed complete of size 200 mm long, complete all as specified.

Aluminium alloy anodised sliding door bolt, 250 mm, plate type, stove enameled black, with bright bolt not less than 12 mm dia, with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified.

Extruded aluminium alloy handles fabricated type, anodised150 mm long, complete all as specified.

100mm long MS butt hinges, medium weight, cold rolled mild steel, complete all as specified.

2nd class hard wood plain solid straight chowkats wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints etc., complete all as specified.

Mild steel FI as in hold fasts and similar small articles fixed to chowkats, conforming Fe-290 Gde E-165, complete all as specified and directed.

Cement concrete type B1, 1:2:4 (20mm graded crushed stone aggregate) as in bed block for securing hold fasts etc., complete all as specified.

Pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates including lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of bituminous paint on back side & hold fast, complete all as specified.

Pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates including lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of bituminous paint on back side & hold fast, complete all as specified.

PCC 1:3:6 typeC-0 (using 12.5 mm graded crushed stone aggregate as in mass concrete filling in hollow portion of the door frames, complete all as specified.

30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified.

Plain, framed, panel shutters (Factory made) 35mm thick (any number of panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part I) kiln seasoned and chemically pressed treated, complete all as specified.

2nd class hard wood 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauze divided in to squares with plain, chamfered mitred and rebated sash bars, any number etc, complete all as specified in SSR Part I, section 8, clause 8.24(a).

100mm long MS butt hinges, medium weight, cold rolled mild steel, complete all as specified.

150 mm long Mild steel pressed handles, oval type, stove enamelled black, complete all as specified.

200mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified.

300mm long Mild steel sliding door bolts, plate type stove enamelled block with bright bolt not less then 12 mm dia and including a minium of 6 bolts and nuts four of bolts for plates and two on staple plate

300mm long mild steel ordinary rate tail rod pattern springs, including roller and roller plate fixed in repairs, complete all as specified.

150mm long floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified.

Mild steel chromium plated curtain rod 19 mm dia with fixing brackets, stops, rollers etc, of standard thickness and of any length fixed in repairs,complete all as specified.

18 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws including clean sawn fillets etc ,3mm thick teak wood lipping in cupboards /shelves fixed in repairs, complete all as specified.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps 30 mm, complete all as specified.

40mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified.

150 mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified.

Magnetic catches of mild steel 50 mm, complete all as specified.

Cast brass screw eye 10 to 12 mm internal dia and fixed in repairs, complete all as specified.

Non skid coloured glazed ceramic tiles of any shade and any pattern of sixe (Pattern consists combination of two or more tiles ) 300 x 300 x 7 to 8 mm thick, as in floors etc over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match shade of tiles, complete all as specified. Note:-The Colour,shade and pattern shall be approved by the GE during execution work. No extra cost is allowed for removing and re-fixing and necessary cutting of door etc if any during execution of work.

Glazed ceramic coloured tiles of size 450 x 350 x 7 mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over & including 10mm thick back screed bed in CM 1:4, complete all as specified.

Non skid ceramic coloured joints free tiles 7 to 8 mm thick area of each tile exc 0.11 but n exc 0.18 sqm in floors, over and including 15mm thick screed bed in CM 1:4 as in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified.

Non skid ceramic coloured joints free tiles 7 to 8 mm thick area of each tile exc 0.11 but n exc 0.18 sqm as in skirting, over & including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified.

Machine cut kota stone slab of 20-25mm thick as in steps, risers etc laid over & including 15mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.

20mm thick marble tiles machine cut in skirting / dado fixed over & including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, including cutting and polishing of type makrana white, complete all as specified.

Cutting chases, pinning through brick wall in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified.

15 mm bore steel tubing, medium grade, galvanished with all fittings like socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

20 mm bore steel tubing, medium grade, galvanished with all fittings like socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

25 mm bore steel tubing, medium grade, galvanished with all fittings like socket, union, elbow, bend, tees etc and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Angle cock fancy type chromium plated with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed in repairs complete all as specified and directed.

Stop valves, cast copper alloy, chromium plated ,with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for 15 mm dia bore iron pipe or for unions, in repairs, complete all as specified and directed.

Bib tap 15mm chromium plated fancy type cast cooper alloy with crutch or butter fly handle, screwed down for iron pipe and fixed in repairs, complete all as specified and directed.

Vitreous china Orissa pan of pattern, long pan size 580x440mm , with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe fixed in repairs, complete all as specified and directed.

Vitreous china wash hand basin corner type, white , flat back, size 450X300 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand, 32 mm waste coupling and waste pipe of 75 mm long fixed in repairs, complete all as specified and directed.

High density polyethylene pipes (HDPE) 40 mm dia for working pressure rating 6 Kg/Sqcm including necessary fittings complete fixed in repairs as in trenched, complete all as specified and directed.

PVC flushing cistern low level 10 ltr capacity with inlet ball valve, float valve and handle including brackets and pipe connecting to WC etc including all fittings including dismantling old flushing cistern any type, complete all as specified and directed.

PVC connection 45 cm long fitted with PTMT nut and washer on both ends, fixed to 15 mm bore iron pipes, complete all as specified and directed.

15 mm bore pillar taps cast copper alloy with capstan heads fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes, fixed in repairs, complete all as specified and directed.

Brass chromium plated shower rose, fancy type,125mm with swivel joints including fixing to steel pipe or union fixed in repair, complete all as specified and directed.

Chromium plated steel grating 100mm dia fixed in repairs, complete all as specified and directed.

PVC (SWR) floor trap, plain including jointing with solvent cement 75mm bore fixed in repairs, complete all as specified and directed.

PVC (SWR) multi floor trap including jointing with solvent cement 75mm bore.fixed in repairs, complete all as specified.

PVC (SWR) pipes 150mm single socketed , in any length with rubber ring joints ,fixed to walls / floor complete including dismantling existing pipes of any description all as specified and directed.

PVC (SWR) pipes 110mm single socketed , in any length with rubber ring joints ,fixed to walls /floor complete including dismantling existing pipes of any description all as specified and directed.

PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints fixed to walls / floor complete including dismantling existing pipes all as specified and directed.

PVC (SWR) bends with oval access door 110mm fixed in repairs complete all as specified and directed.

PVC (SWR) bends with oval access door 75mm fixed in repairs complete all as specified and directed.

PVC (SWR) vent cowl 110mm fixed in repairs complete all as specified and directed.

PVC (SWR) branch piece (single Y) equal or unequal with oval access door 110mm fixed in repairs complete all as specified and directed.

PVC (SWR) juncton single (single T ) equal or un equal with access door 75 mm fixed in repairs complete all as specified and directed.

PVC (SWR) juncton single (single T ) equalor un equal with access door 110mm fixed in repairs complete all as specified and directed.

Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 10 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including one coat of of red oxide zinc primer, complete all as specified and directed by Engr-in-charge. Note:- Guard bar shall be measured & paid seperatly.

Framed work such as grills grating etc with end bars shouldered riveted or forged into spikes and similar work conforming to grade Fe 290 gde E -165, complete all as specified.

20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15 mm thick backing coat cement mortar (1:4) including pointing ,mouldging the edges in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified.

Complete removal of the existing sunken treatment including roughing and prepration surfaces of old concrete floor by picking , scurubbing down with steel brushes ,sweeping clean and washing down with water to remove dust etc.and applying the following treatment complete all as specified (a) 15 thick rendering on fair faces of brick work or cement surfaces in cm 1:4 mixed with water proofing admixture by weight of cement to sunken portion including wall of sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement finishing concrete including walls of sunken portion with proper slope all as specified. NOTE :- W P admixture shall be measured and paid separately. (b) Applying Ist course of bitumenous primer @ 0.4 ltr /sqm conforming to IS-3384 over plastered surface. (c) Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature and applied @ 1.2 kg/sqm. .contd to item No-81.01

(d)Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 Grams/sqm non woven polyster made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat . (e)Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature and applied @ 1.2 kg/sqm .

PCC (1:7:12) type F-2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and is specified.

Rendering 15mm thick in CM (1:3) on fair faces of brick / concrete surfaces of sunken floors, including taking down extisting plaster and mixing of water proofing compound, finished even and fair complete, all as directed and specified NOTE: WPC will be measured and paid separately.

Cutting / drilling hole in brick wall / Rcc beam by mechanical mean exc 300mm deep in slab of WC/ Bath including fixing 40mm dia 45mm long GI Spouts pipe all as directed by Engr in Charge

Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified and directed.

PCC 1:2:4 type B-0 12.5 mm crushed stone aggregate of average 25 mm thick make to slope in sunken floors complete all as directed

Soap dish fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

Tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated, complete all as specified and directed. Make: Prayag Cat No-BA-20 or equivalent cat part No of Make as specified in Appx 'F' here in after.

Complete removal of existing roof treatment of any description viz. tarfelt or membrane surface or roof tiles etc. including grubbing up of tree roots and removing all the debris to a distance n.exc 100m and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust etc and applying the following roof treatment complete all as directed:- (a) Applying Ist course of 15 mm thick cement screed in CM 1:4 over concrete surface. (b) Applying 2nd course of bituminious primer confirming to IS-3384 @ 0.4 lit/sqm over the screed bed. (c) Applying 3rd course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm. (d) Applying 4th course of APP (Atactic polypropylene) based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap by forced / torch application as per manufactures instructions. .....contd to item No-89.01

(e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180 degree C and applied @ 1.2 kg/sqm over APP membrane, complete all as specified and directed.

PCC 1:2:4 type B-0 using (12.5 mm graded crushed stone aggregates ) in any thickness as in padding on roof slab for levelling the surface of roof slab finished fair and even, complete all as specified and directed.

Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs including dismantling of existing tank of any description and S&F 20 mm ball PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe, complete all as specified.

Gun-metal globe or gate valves with iron handle quarter tun type, screwed both ends for iron pipe or for unions of 20mm dia bore and fixed in repairs, complete all as specified.

Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified

Cleaning the surface of of RCC chajja, parapets etc with wire brushes, washing down with water, taking out cement plater of any thickness including scrubbing down loose portion complete of height upto to 11.00 mtrs of roof chajja / fins, external surfaces of chajja portion including necessory scaffolding / formwork if required & applying dubbing coat of plaster of epoxy concrete of required thickness and plastering 10mm thick in CM 1:4 and applying two coats of acrylic cementious brush applied water proof coating with dry film total thickness of approximate 1mm thick as in patches (Make- Dr Fixit Pidilite 2K or equivalent product of M/S Chemistek, M/s Prime etc) all as per manufacturer's instruction, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

15 mm thick rendering in CM 1:6 on other than fair faces of brick work & finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Rendering 5 mm thick using CM (1:3) on ceiling surfaces complete all as specified and as directed.

15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 including water proofing compound as per manufacturers instruction's & finished the surfaces even and smooth without using extra cement, complete all as specified and directed. Note : WPC will be measured & paid seperately.

Supply only WPC (Make SIKA/FOSROC/CHOKSEY), complete all as specified

PCC type B-1 1:2:4 (20mm graded crushed stone aggregate) as in copings, bed plates, kerbs etc, complete all as specified

75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection etc, finishing surface even and fair including filling joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. (Note : The concrete shall be laid at a stretch n.exc 3.0 m in length and every turning/ corners.

Applying three coats of white wash including preparation of newly plastered wall surfaces, complete all as specified.

Preparation of old treated plastered surfaces and applying two coats of white wash on wall surfaces, complete all as specified.

Preparing of newly plastered ceiling surfaces and applying three coats of white wash, complete all as specified.

Preparing of old treated ceiling surface and applying two coats of white wash, complete all as specified.

Complete removal of the existing treatment of any description, washing rubbing down and stopping of distempered and painted surfaces of walls and applying 3 mm thick wall care putty, primed with alkali resistant priming paint and two coats of oil bound distemper all as specified and as directed.

Applying two coats of OBD including preparation of newly plastered wall surfaces including one coat of alkali resistant primer, complete all as specified.

Applying two coats of synthetic enamelled paint over a coat of pink primer on wood & wood based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces, complete all as specified.

Applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description, not other wise described over 10 cm width or girth including preparation of new surfaces.

Preparation new plastered surfaces and applying two coat of cement base paint over one coat of primer, complete all as specified.

Preparation of old treated plater surfaces of walls and applying two coats of cement base paint, complete all as specified.

Preparation of newly plasrtered surfaces of walls and applying two coats of weather proof paint paint, complete all as specified.

Preparation of old treated plaster surfaces of walls and applying two coats of weather proof paint paint, complete all as specified

3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified.

3mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified.

Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including bedding in cement mortar todwarf wall or including fixing cantilever brackets and commecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mm including waste coupling and 90 cm waste pipe fixed in repairs, complete all as specified.

Kitchen plate rack of stainless steel of size "30x31x10" inches complete all as specified and directed. Make:-Prayag cat part No-P-346 or Equivalent cat part of make as specified in Appx 'F' here in after.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire cloth and average width of aperture 1.18 mm, complete all as specified.

Precast RCC Type B-1 1 : 2 : 4 (20 mm gradedcrushed stone aggregate ) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified.

Demolition of reinforced cement concrete of any description and in any positon, complete all as specified.

Mild steel TMT bars 6 to 8 mm dia as in reinforcement for concrete, cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified.

Machine cut kota stone slab flooring 20-25mm thick over & including cement screed base laid over 15 mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

15mm thick screed bed in CM (1:6) laid over sub base for laying floor tiles complete all as specified.

Factory made precast concrete designer paver tiles of diferent colour & shape of size 300mm x 300mm x 20mm laid and jointed with grey cement slurry with pigment to match colour of tile, laid over screed bed or bedding layer. compressive strengfth not less than 250 kg /sqcm complete all as specified and directed. Note :Screed bed /bedding laying shall be measured and paid separately .

PCC 1:4:8 type D-2 ( 40 mm graded crushed stone aggregate ) as in sub base to flooring 75 mm thick, complete all as specified.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m depth, for foundation etc or for shafts, manholes, etc not exc 10.00sqm on plan and not exc 1.5m depth and getting out in any type of soil complete all as specified and directed

Returning filling in, including spreading, levelling watering and well ramming in layer not exc 25 cm thick complete all as specified and directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed.

Demolition and breaking up drain pipes 200mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and as directed.

Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate for 200mm dia bore pipes all as per SSR Part-I specifications, complete all as specified and directed.

Cutting into existing manholes for connecting new drains (internal dia of pipe 200mm), making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required, complete all as specified and directed.

Salt-glazed stoneware (SGSW) grade-A drain pipes 200mm bore laid and jointed in concrete bed complete including testing etc. all as specified and directed as per SSR Part-I specifications, complete all as specified and directed.

Applying one coat of synthetic enamelled paint on wood & wood based materials of any description, not other wise described over 10 cm width or girth including preparation of old surfaces, complete all as specified and directed.

Applying one coats of synthetic enamelled paint on steel or iron surface based materials of any description, not other wise described over 10 cm width or girth including preparation of old surfaces.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit medium grade 20 mm bore ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc for one light/fan/bell point controlled by one, one way switch including cutting chases and making good to disturbed surfaces of wall / ceiling / floor including treating with existing finishes, complete all as specified and as directed.

Description all as per item No. 136 above but for 3 pin 5 Amps on switch socket / socket outlet on same board with cable 1.5Sqmm size, all as specified and directed

Description all as per srl item No-136 here in before but for one 3 pin socket outlet 6 amp independent complete all as specified.

Description all as per srl item No 136 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for main wiring and 2.5 sqmm as in continuous earth wire.

Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified.

Socket outlet, 3 pin, 5 Amp flush type universal,complete all as specifed.

Switch socket multipurpose combination 2 in 1, 2 pin & 3 pin, 6 Amp flush type universal,complete all as specifed.

Switch socket multipurpose combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal,complete all as specifed.

Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Inverter LED lamp, 6500K, 900lm in white colour of 9 wattbase cap B-22 with poly carbonate diffuser and aluminum heat sink, complete all as specified & directed.

Fan regulator stepped type (electronic ) 240 Volt, 50 Hz, two module, five step 100 Watt, flush type for 1200/1400mm sweep AC ceiling fan, complete all as specified. .

Bell push piano flush type 6 Amp, (ISI marked), complete all as specified.

Musical door bell, 230 volts AC supply all as specified and directed by Engineer-in-Charge.

Tube light fitting integrated type slim 20 watt, efficacy 125 lumens/watt, extruded aluminum housing, PC diffuser complete with housing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to light fitting all as specified and directed. Make : Crompton Greaves, model Bright Linea, Cat No CCS-100-20-65-HL2-DP-NWH or equivalent Cat Part of make as specified in Appx F here-in-after.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 12 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning with & including taking down old unsv DBs complete all as specified. Make:-Legrand Cat part No :-5076 22 or equivalent cat part of make as specified in Appx "F" here in after.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series fixed in repair, complete all as specified. Make:- Legrand cat part No-4085 87 to 4085 95 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand cat part No-4086 09 to 4086 17 or Equivalent cat part of make as specified in Appx 'F' here in after.

Vertical distribution board TPN IP 43-'IK 09 with bus bars neutral links blanking plates double door suitable for FP MCCB as incommer and out going SP/TP MCBs 4 ways complete all as specified and directed. Make:-Legrand Cat part No :-5077 45 or equivalent cat part of make as specified in Appx "B" here in after. Note:- MCCBs and MCBs shall be measured and paid separately

MCCB 415 volts 4 Pole, rating 100 Amps,having short ckt and over load protection, breaking capacity 16 KA fixed thermal type, complete all as specified. Make: Legrand Cat Part No 4200 15 or Equivalent cat part of make as specified in Appx 'F' here in after.

Sub main wiring with single core cable 2x 6 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm rigid PVC conduit (Concealed) medium grade alongwith 1x 4 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface, complete all as specified and directed. Note:-2 wire of 6sqmm, 1 wirw of 4sqmm and one run of pvc conduit shall be measured as one unit.

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironincluding PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection pipe, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- Rate for earth lead wire & protection pipe upto 7.5mtr length are inclussive in this item & no extra payment shall be admissible for the same.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty electric cable with XLPE insulated screened PVC bedded aluminium stranded conductor served with inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of size 35 Sqmm x 3.5 core, complete all as specified.

Excavation in trenches in any type of soil not exceeding 1.5m wide and n.exc 1.5 mtr in depth for laying of under ground electric cable and getting out complete all as specified.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil complete all as specified.

Removing excavated surplus materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

Dry river sand cushioning to UG cable 8 cm thick before laying and 15cm thick after laying complete all as specified and directed. Note:- 1.Dry fine sand of best available quality shall be used. 2.Punned thickness shall be made and paid.

GI pipe light grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts, road crossing etc with fixing clamps, nuts bolts, washer of requrered size if required, complete all as specified.

Supply and laying sub class `B` bricks laid dry flat transversely along the length of cable with width equal to the length of bricks over sand cushioning as protection cover of cable laid, complete all as specified and directed.

Taking down old unsv security light of any capacity & supply & fixing LED Flood light 60watts made up of presssure die cast with IP66 protection, efficient high output emitter LED for better distribution with toughned glass, complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of suitable size to light fitting complete all as specified and directed. Make:-Crompton Cat Part No:-LFLE-60-CDL-M or Equivalent cat part of make as specified in Appx 'F' here in after.

GI bracket made of 40 mm bore medium grade pipe made to shape of length 1.2 mtr fixed with two set MS clamp 40 X6 mm nut bolt & washer for fixing streat light fitting complete all as specified and directed.

Exhaust fan metal 300 mm sweep, heavy duty, single phase AC 230/240V 50 Hz AC, with energy efficient motor ,pre-lubricated double ball bearing ,speed 1400 RPM, complete with louvers for wall mounting incl cutting holes, grouting, holding down bolts, nuts, washers and provision of flexible PVC insulated copper conductor cable 3 core 0.75 sqmm from ceiling rose to exhaust fan complete all as specified and directed.

Supply, install and testing water storage type (Geyser) single phase 230V, 50 Hz, 5 star energy saving high density PUF insulation tank made of heavy duty magnesium anode rod with steel core to protect enameled tank from rust & corrosion, vertical installation type, 25 litre capacity, 2000 watt rated power, incoloy 800 glass coated heating element, tank coating of feroglas powder, tank made of ultra thick super cold rolled steel plates, rated pressure 0.8MPa, IPx4 protection consist of safety valves, thermal cut off, thermostat including connecting up fixed to walls by drilling of holes, grouting of bolts of suitable size with nuts etc and making good disturbed surface including marking MES No. on geyser with synthetic enamel paint complete all as specified & directed. Make : HAVELLS Model No. Monza DX Cat Part No GHWAMGTWH025 or equivalent model/Cat Part No. of Bajaj/CG/Racold.

Single pole and neutral powder coated sheet metal deep drawn enclosure with pin and earth plug and socket including insulated neutral link adjustable din rail and connecting links with one single pole and neutral MCB 20 Amp 240 volts, 10KA, C series complete all as specified and directed.

Cutting existing steel tubing 15mm bore for alterations or additions (Each cut measured), complete all as specified.

Screwing existing steel tubing 15mm bore for alterations or additions (or lengthening screw on pipe to form connector), complete all as specified.

Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified.

15mm bore Stop valve / angle valve cast copper alloy screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed, complete all as specified.

Bib taps 15mm bore of cast copper alloy, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed.

M/S KRISHNA BUILDERS

Warne Builders

NARESH KUMAR AND COMPANY

M/S TRIKUTA BUILDERS

Anand Prakash

M/S ARUN ANAND

M/S Vishwakarma Builders

M/S Sudagar Mal

Sarbat Construction Co