MAINT OF MISC B/R SERVICES IN SECTOR C AND D IN AKHNOOR MIL STN UNDER GE(S) AKHNOOR

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed gound, posts embedded in concrete surface, complete all as specified.

Excavating in post holes (or imilar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil, complete all as specified.

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5mtr above the starting point.

Plain cement concrete Nominal Mix M-7.5 (1:4:8), type D-2 (using 40mm graded crushed stone aggregate), as in or as mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge.

Plain cement concrete Nominal Mix M-10 (1:3:6), type C-1 (using 20mm graded crushed stone aggregate), as in fixing of angle iron fencing post, complete all as specified and as directed by Engineer-In-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flate iron fillets (for securing chain link fencing) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Dismantling of punched tap concertina coil any size from posts etc complete and neatly coiled on rough drums for re-fixing as directed

S&F punched tape concertina coil of dia 610 mm fixed to angle iron brackets with necessary accessories like straining wires,fixing clips etc complete.

Dismantling of barbed wire fencing from posts etc complete and neatly coiled on rough drums as directed

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed.

Fixing only chain link MS galvanisd fencing any size or type, includind line wire,any mesh, size and type to any type of standards,rails,straining bolts, etc. including provission of binding wire all as specified.

Supply only chain link MS galvanisd fencing any size or type (Note -Min Dia of main bar 4mm and cross bar 4mm)

M&L for Mild steel screw bolt (machine made) 5 to 10 mm dia with hexagonal or squre heads at one end and screwed the other end,each screwed end to be fitted with washers and one hexagonal nut ,n exc 5cm long all as specified.

Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending in FE 410-W (Gde E-250) quality -A complete all as specified and directed by Engineer in Charge.

M&L for MS flat iron 40x6mm and struts in fencing including cutting tops to shape as directed,drilling holes, Fe 290 gde E-165 complete all as specified. .

Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying two coats of synthetic enamel paint over one coat of zinc chrome/ red oxide primer, complete all as specified.

Preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-In-Charge.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc., all as directed.

M&L for rendering 15 mm thick in CM(1:4) on other than fair faces of brick or concrete surfaces finished even and smooth with out using extra cement in external surfaces all as directed by Engineer in charge.

M&L for preparation of new surfaces of walls and applying two coats of cement based paint over one coat of alkali resistance priming paint complete all as specified and as directed.

Preparation of new plastered surfaces of walls applying two coats of exterior emulsion (Apex paint), over one coat of primer complete all as specified and as directed by Engineer-In-Charge.

Complete removal of existing treatment of plastered or unplastered surfaces of walls and applying two coat of cement paint, complete all as specified and as directed by Engineer-In-Charge.

Preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment and applying one coat of exterior emulsion (Apex paint), complete all as specified and as directed by Engineer-In-Charge.

Preparation of old/ decorated plastered or unplastered surfaces of walls and applying one coat of cement paint, complete all as specified and as directed by Engineer-In-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by engineer in charge.

M&L for 10mm thick rendering as in backing coat of tiles in cm 1:4 complete all as specified and as directed by engineer in charge.

M&L for glazed ceramic coloured designer pattern tiles 450mm x 300mm x7mm thick on vertical surface such as skirt, Dado etc. set and jointed in white colour cement complete all as specified and as directed by engineer in charge. Tiles colour and design shall decided by AGE/GE.

Dismantling of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed by Engineer-In-Charge.

M&L for brickwork with sub class 'B' bricks,straight or curved on plan exc 6m mean radius in CM 1:6 Complete all as specified and as directed

All as per item 30 here above but except bricks

M&L for half brickwork with sub class 'B' bricks,straight or curved on plan of any reduce in CM 1:4 Complete all as specified and as directed

M&L for half brickwork with sub class 'B' bricks on edges wall in CM 1:4 Complete all as specified and as directed

Flush pointing to block in course or ashlar masonry or concrete block walling in CM 1:4

Demolition of cement concrete (unreinforced) concrete in ground floors and paving n-exc 15cm thickness ( below or above ground floors.) complete all as specified and as directed by engineer in charge.

4. PCC 1:3:6 type C-1(20mm gde) as in surface channels and drains complete specified & directed.

Extra for forming fair finished drain or channel 30 CM inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and as directed by Engineer-In-Charge.

M&L for 50 mm thick cement conc one 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection joint filled with bitumen sand mixer 50mm thick finished even and smooth without using extra cement, complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for, including cleaning, removal and disposal of rubbish/ waste materials from premises, complete all as specified and as directed by Engineer-In-Charge.

Pre-cast reinforced cement concrete (1:2:4), type B-1, (using 20mm graded crushed stone aggregate), nominal mix, as in landings, cover slabs (for drain cover, man holes etc.) chullah hoods, chajjas, water troughs and similar articles with plain faces as specified in clause No- 4.11.16 of SSR Part-I (2009), set in cement mortar 1:4, complete all as specified and as directed by Engineer-In-Charge.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-In-Charge.

M&L Cement concrete 75mm thick type E- 2, 1:5:10(40mm graded aggregate) complete all as specified and as directed by Engineer-In- Charge.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with gray cement and pigment etc, complete all as specified and as directed by Engineer-In- Charge.

M&L for sand 25mm (cushioning) filling under floors including watering and consolidation all as specified and as directed by Engr- in -charge.

M&L for screed bed or bedding layer of morter 15 mm thick for laying floor finished in CM 1:6 complete all as specified and directed.

M&L for chequered cement concrete tiles glossy finish coloured 300mm x300mm x25 mm thick pattern as approved by GE as in floor set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over(with greypigment cement and pigment).

Cement concrete 1:2:4 type B-0 (Unsing 12.5 mm crushed stone aggregate)as in edging, coping, kerb stone etc. all as specified.

Amount of Schedule of credit of for Rs 14,005.00 shall be deducted from quoted amount.

PACHNANDA BUILDERS (BID ID -3173658)

Deepak Enterprises (BID ID -3173798)

bushan kumar (BID ID -3170657)