COMPREHENSIVE B/R MAINT TO CERTAIN MD ACCN OF JCOS, ORS, MAP PH-II AT ASHOK NAGAR AND ALL OFFICES OR RESIDENTIAL AREA ON SEP SALUNKHE MVC MARG AREA UNDER GE DEHU ROAD

Supply only in repairs stainless steel curtain rod 25 mm dia complete with bracket and side knobs all as specified and directed.

Supply only in repairs floor door stopper, with 150 mm long of Aluminium body and tounge with hard drawn steel spring in floor

Supply only in repair Galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.40 mm including necessary beadings and fillets complete all as specified and directed.

Supply only in repair 3mm thick sheet glass ordinary quality, in square or reqd shape n exc 0.50 Sqm each pane including oil putty complete all as specified and directed.

Supply only in repair200mm long mild steel barrel tower bolt, stove enamelled black with bright bolt complete all as specified and directed. .

Supply only in repair 250mm long sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply only in repaiur 150mm aluminium alloy handle, cast type, anodised

Supply only in repair door closer hydrau lically regulated,designation No.1universal type,, Aluminium body suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed.

Supply only in repair glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply only in repair Towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats min wt 170 gms complete all as specified and as directed.

Supply only in repair water tank cover for tanks of size 500 ltr or 1000 ltrs complete all as specified and directed.

Supply only in repair PVC seat cover for EWC of white colour complete all as specified and directed.

Supply only in repair 15 mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply only in repair 15 mm bore long body bib tap, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply only in repair 15 mm bore Stop valves/, cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only in repair 15 mm bore Stop valves/angle valve, fancy type chromium plated cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply only in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.

Supply only in repair 15 mm Brass CP Wall Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Supply only in repair 32mm waste fittings, brass, chromium plated for wash hand basins,sinks etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.

Supply only in repair Grating doom 125mm dia of stainless steel with hole/without hole complete all as specified and directed.

Supply only in repair 15mm PTMT Bib tap standard of any colour screwed, for iron pipe and fixed complete all as specified and directed. (Make: Prayag/Shakti)

Supply only in repair 15mm Ball valves, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) (Make: Prayag/Shakti) complete all as specified and directed.

All as per item No. 25 here- in- before but size 20mm dia and Minimum wt (for 20mm -210gms) (Make: Prayag/Shakti)

Supply only Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge

Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed.

Supplying and laying15 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supplying and laying 20 mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supply only Brass Tee 16 mm bore size complete all as specified and directed.

Supply only Brass Tee 20mm bore size complete all as specified and directed.

Supply only Brass Elbow 16 mm bore size complete all as specified and directed.

Supply only Brass Elbow 20 mm bore size complete all as specified and directed.

Supply only UNION 16 mm bore size complete all as specified and directed.

Supply only UNION 20 mm bore size complete all as specified and directed.

Supply only Tank Adaptor 16 mm bore size complete all as specified and directed.

Supply only Tank Adaptor 20 mm bore size complete all as specified and directed.

Supply only PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

All as per item No. 40 here- in- before but 600mm long.

Dismantling water tanks and removing to site up to 500Ltr capacity.

S&F 500 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity complete all as specified and directed.

S&F 1000 ltr capacity rotational mounded polythylene water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position including disconnecting unserviceable PVC/Cement water storage tank of 1000 Ltr capacity complete all as specified and directed.

Supply in repairs Brass chromium plated shower rose 125mm size with swivel joint, including fixing to steel pipe or union 15mm bore.

Supply only 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and brackets complete all as specified and directed. Specification of flushing cistern shall be as per IS 7231-1994.

Supply only' flushing cistern kit' for complete set to fitted inside as per reqd for cistern functional complete all as specified and directed.

S & F in repairs Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs. Note:wash basin shall conform to IS 2556(part-4)-2004.

M&L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with and including 5 litres PVC automatic flushing cistern, including brackets, flush pipe, CP urinal spreader, grating union , union and cap and discharge pipe; fixed in repairs.

S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs .

S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat cover, flush pipe, flushing cistern incl all joints complete(make: Cera/ Jaguar/ Prayag)

M&L for PVC (SWR) floor trap(75 mm dia), plain with grating including jointing with solvent cement to mitigate the site requirement to the entire satisfaction of engr-in-charge.

Supply only 20 mm dia gun - metal globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed

Supply only soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed.

supply only 32 to 40mm dia PVC waste pipe for wash basin and kitchen sink complete all as specified and directed.

Demolition of brick or stone/boulder masnory, built in cement mortar.

Material and labour for Modular Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in and setting in mortar CM 1:6, complete all as specified and as directed by engr-in-charge.

Taking down cement plaster on brick walls or concrete surface including raking out joints hacking for key and scrubbing down with water etc. complete all as specified & directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for 5mm thick rendering in cement mortar in 1:3 to concrete surfaces as in ceiling in patches, finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L two coats of white wash to new plastered surfaces on ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.

M&L for two coats of cement base paint on new plastered surfaces of walls including prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge.

M&L for two coats of oil bound distemper on new plastered surfaces of walls including 3mm thick wall putty on plastered wall surface incl prepration of surfaces and priming with alkali resistant priming paint complete all as specified & directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Non-skid coloured Ceramic tiles of size 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over and including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified.

M&L full body Vitrified Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tile exceeding 0.30 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar 1:6, complete all as specified and directed.

M&L full body Vitrified Ceramic tiles of light colour shade 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.30 sqm but not exceeding 0.42 sqm, as in skirting to match the vitrified ceramic couloured light shade floor tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10 mm thick backing or rendering coat of plaster in cement mortar 1:4, complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 450 mm x 300 mm and 7 mm thick of approved colour as in verticle surfaces such as skirting, dado and risers to steps etc., set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 10mm thick backing coat in cement mrotar1:4 including triangular filleting in cement mortar 1:4 on top of skirting/dado etc complete all as specified and directed.

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site n exc. 1.5 Sqm each complete all as specified and as directed

Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and as directed

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm

S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm

M/L for PCC 1:2:4 type B1 in door frame filling all as specified and directed.

Supply & Fixing PVC door frame (50x47) mm made out of plain colour5 mm thich PVC Sheet reinforced with MS Square Tube, supplying & fixing in opening as per specification & drawing. The door frame shall be tied to wall using 75/100mm long screw as directed

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.

S&F 30mm mm thick flush shutters, solid core construction, with block board core and plywood face panels and Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive on both side as per manufacturer's instructions commercial type . all as per spd complete all as specified and as directed.

S & F Glazed skeleton shutter 35mm thk IInd class HW open rebated and prepared to receive glass, gauze etc (without shash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze etc ; size of members of shutters as specified in SSR Pt-I, section 8 clause 8.24 (a)

S & F galvanised mild steel wore cloth, 0.63mm nominal dia of wire and avg width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

M & L for Preparing old painted steel & iron surfaces of any description over 10 cm in width or girth ,including roof and applying one coat synthetic enamel of approved tint by Engr-in-charge synthetic enamel paint complete all as specified.

S&F mild steel butt hinges of 100 mm size medium weight cold rolled by welding to existing frame complete all as specified and directed

S&F 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.

Supply only 250 mm Aluminum alloy, anodised , sliding door bolt with hasp and staple (BOLT TYPE) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed.

S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section.

S&F 150mm long Aluminium handles cast type anodised

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.

M&L for Granite stone slab 18 to 20 mm thick polished as in steps, jambs, pillars, window cills, cooking platforms and like including scrteed 15mm screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with colour, shade and moulding of edges or cutting grooves in steps complete all as specified and directed by Engr-in-charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed no pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.

M&L machine cut kota stone slab flooring 20-25mm thick over and including cement screed based 15 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity upto 500 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. from existing water tanks of capacity exc. 500 litres and not exc. 1000 litres of any type and in any position and writing the date of cleaning complete all as specified and directed.

Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed.

Supply only Liquid water proofing compound .

M & L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engr-in-Charge. (a) The Roof surface shall be thoroughly wire brushed washed dried up & cleaned to remove all foreign materials and dust to receive primer. (b) On the dried roof surface, apply one coat of bituminious primer @100gm/Sqm as per manufactueres instruction. (c) On this primed surface the approved APP modified bituminous membrane with non woven polyester mat asreinforcement weighing not less than 3.5 Kg/Sqm laid by torch applicatioon metho and top surface shall be applied with bituminous aluminium paint. (d) The overlap while torching shall be 75mm on longitudinal direction & 100mm on transverse direction. Note : Obtain material though out to low lying area.

Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed.

M&L rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed witjh angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A including a shop coat of zink chromate primer complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed.

S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifeed.

All as per item No. 102 above but plain sheet fix in valley gutter / ridge/ View cutter etc.complete all as specified and as directed.

Demolition of concrete ( unreinforced ) in ground floors and paving nexc 15 cm thk (below or above ground level)

M & L for 75 mm thk Cement conc type C-2, 1:3:6 (40 mm grade Agg) as in plinth protection finished even and fair .

M & L for PCC type D2 1:4:8 (40 mm Grade Agg ) 75mm thick as in sub base, in floors etc. complete all as specified.

M&L for laying machine pressed precast concrete interlocking reflective coloured (Glozy Finish) rubber moulded pavers block any shape and size confirming to IS 15658-2006 of 55mm to 60mm thick, M-35 Grade over 30mm thick sand layer watering and ramming incl demolition of old tiles or blocks etc.complete all as specified.

M& L Chequared Cement Concrete (Glossy finish) rubber moulded Tiles 30 CM x 30 CM X 25 mm th set and jointed in cement slurry and pointed in neat grey cement & pigment in floors over screed bed 15 mm thk in cm 1:6 incl demolition of old tiles or blocks etc.complete all as specified.

Dismantling wall/ ceiling boards(fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl. cover fillets and alum snip grid.

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

Providing and carrying out water Proofing treatment to toilet, sunkan slabs, wet areas ets, after proper surface prepration, carry out cementitious ingection grouting at leakage point using cebex 100 plasticised expanding grounding admixture, application of polymer modified at slab wall junction using Nitoband SBR latex screen modifier cum bonding agent and application of two coat of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc, complete including 15mm thick cement plaster in CM 1:4 all tools and plant as per manufacturers specification paint and including Taking down existing water proofing treatment of any description and any layer from roof including scraping and roughening old by picking, sweeping clean and washing down to remove dust etc.complete and applying/brushing the cleaned surface with neat cement slurry 3 Kg per Sqm complete. complete all as specified and directed.

S & F in repairs Pulley Operated Cloths Drying system of 7 feets consisting of aluminium Pipe of outer dia 22 mm , inner dia 19.8 mm pulleys made up of derin with rope guide mounted on channel pair of length 24" (Distance between two pipe is adjustable ) looking system to hide rope knot channel to be mounted or fixed with self -tapping screws provided in KIT rope will be HDPE double core of 4 mm dia fixing to ceiling / Wall as specified and directed by Engr-in-charge.

S & F in repairs Pulley Operated Cloths Drying system of 8 feets consisting of aluminium Pipe of outer dia 22 mm , inner dia 19.8 mm pulleys made up of derin with rope guide mounted on channel pair of length 24" (Distance between two pipe is adjustable ) looking system to hide rope knot channel to be mounted or fixed with self -tapping screws provided in KIT rope will be HDPE double core of 4 mm dia fixing to ceiling / Wall as specified and directed by Engr-in-charge.

S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats fixed in repairs all as directed. (Note:- Removing existing fluhing system of CI or any other quality incl brackets).

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces over roof slabs with admixture of integral water proofing compound @ 3% by weight of cement (WPC shall be measured & paid seperately)

Dismantling water tanks and removing to site exc 500Ltr but n. exc 1000Ltr capacity.

M & L for preparing old painted surfaces of wood and wood based materials of any any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of tint approved by Engr-in-Charge

Please Enable Macros to View BoQ information